The backup disk image "/Volumes/Time Capsule Disk/Earl Burroughs's MacBook Pro.sparsebundle" is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....
The backup disk image “/Volumes/Time Capsule Disk/Earl Burroughs’s MacBook Pro.sparsebundle” is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....
The Backup disk image ... sparsebundle ... is already in use.
Similar Messages
-
I keep receiving this message.
Time Machine could not complete the backup.
The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBookPro.sparsebundle" could not be accessed (error -1).
Can anyone help me clear this annoying message up? Thanks for advance....The unplugging was of power, if you were unplugging ethernet .. that will not do anything.
The issue is explained here.
C17 http://pondini.org/TM/Troubleshooting.html
If a restart of the TC is not adequate you maybe in the 2% that has other issues.. please try a full network restart in correct order.. with everything off.. modem.. then TC.. then clients.. with 2min gap to allow modem and TC to finish boot process. -
My back ups are failing, the message I receive is "The backup disk image "/Volumes/Mamma and Pappa's Time Caps-1/Liz Giusti’s MacBook Pro.sparsebundle” is already in use. Any suggestions?
I am trying to back up my Macbook Pro to a time capsule attached to my iMac. When I first installed the Time Capsule, all backups went well.Reboot the TC.. it has got lost.. or reboot the whole network.. restart in correct order. .modem router.. TC.. clients.
It suddenly will reappear.. you might need to reboot it again in a few days. .such is apple software today.
Some more info C12. http://pondini.org/TM/Troubleshooting.html -
Time could not backup message said the back up disk image "/Volumes/Data-1/......iMac.sparsebundle" is already in use.( the ..... is my name on the message)
Can anyone please help me, with what to do?
Thanks SueOk.. read C12 and C17 is also relevant in Pondini troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Try the above.
No luck then you should do
A1 .. Load the widget so you know what TM is doing.
A4 .. Reset of TM.
A5.. Verify the backup.
First thing.. though.. do a full network reboot..
Turn off everything.. restart the modem.. wait 2min.
Restart the TC.. wait 2min
Restart the computer. See if it now functions.
You might have to reset or do more severe stuff.. but try with that.
I am offline for 8 hours..
Pondini or one of the others here might be able to help further. -
The backup disk image "/Volumes/Data/MacBook Pro.sparsebundle" is already in use
My time capsule has been backing up fine and then I got an error message "The backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use." and the backup failed. This has been happening every day now for a week. The green light is still on the machine...... any help appreciated...
Two Solutions for "sparse bundle already in use" Error
Simple solution (from Bob Timmons):
1. Make sure that no other Macs are backing up the Time Capsule at the time
2. Pull the power cord from the back of the Time Capsule
3. Count to ten
4. Plug the power cord back into the back of the Time Capsule
If Simple doesn't work:
The Backup disk image ... sparsebundle ... is already in use. -
This is the second time I've encountered this issue with Time Capsule using Time Machine automatic backup. I haven't found the following specific error message in the list of troubleshooting issues: "Time Capsule cannot complete the backup. The backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use."
I'm not certain what causes this issue. I think it may have something to do with having to force shutdown with apps still open when the beachball hangs and the MacBook has to be rebooted.
Has anyone else dealt with this issue?Welcome to Apple Support Communities
Restart your Mac and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
Help !
The last few days my time capsule reports an error The backup disk image “/Volumes/Data-1/MacBook Pro.sparsebundle” is already in use.
To make things worse I seem to be loosing my screen so need to make a back up ASAPMake sure that no other Macs are backing up at the time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This will fix the issue about 98% of the time. If you are in the unlucky 2% category, please post back for more assistance -
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
-
What if my error message is the following: The backup disk image “/Volumes/********'s Time Capsul/****’s MacBook Pro.sparsebundle” is already in use. (I have redacted the name of the computer with asterixes)
This is a complex procedure.
Pull the power cord from the back of the Time Capsule
Wait a minute or two
Plug the power cord back in to the back of the Time Capsule
This will fix the issue 98% of the time. If you are in the unlucky 2% category, more help is here from Pondini, the Time Machine guru:
The Backup disk image ... sparsebundle ... is already in use. -
The backup disk image “/Volumes/Felix Pereira's Time Capsul/Felix Pereira’s MacBook Pro.sparsebundle” is already in use.
Please look over to the right of this page under the heading of More Like This for multiple answers and solutions.
Or, see #C12 in Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html -
Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?
If you reboot the computer it should fix the problem. Also see the first link under More Like This to the right of this page:
I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion -
When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.
-
I am getting this error when time machine tries to back up to a time capsule. "The backup disk image “/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX’s MacBook Air.sparsebundle” is already in use." Same time capsule has worked in the past.
First, restart the computer and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use. What should I do?
SeoulTom (Coyner)Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the Time Capsule
Wait a few minutes, then try a backup again
Check to make sure that you are running firmware 7.6.4 on the Time Capsule -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category.
Maybe you are looking for
-
How to activate the transparent table along with append structure
Hi, I add the new fields in existing append structure on tale VBAP. Initially i provide them the data type as Char with length 20. Similarly i added the fields in user exit on scree 8459 to add fields on screen. Until this eveything was working fine.
-
I have a new kind of requirement, I have two videos I want to add first video full screen and second video as thumbnail at some corner on that video.and make this as a single video.as like in skype. can any one please help me how to do that.thanks in
-
I have an iPad2. when I connect to my home network I see a list of at least 5 or 6 networks. how do eliminate this list?
-
How to record V-Drums in Logic Express?
I'm trying to record my V-Drums through the M-Audio 2626 interface into Logic Express. I'm able to trigger sounds in the Logic Express library when I conned the MIDI-out on the V-drums to the M-Audio. But I'd like to record the Roland drum sounds thr
-
Single Code Page Unicode conversion when source and target are the same
Hi everyone. We have recently upgraded our non-unicode 4.7 to ECC6 non-unicode. Now we have begun researching the next step to convert to Unicode. I know we could have done the Combined Upgrade and Unicode Conversion but I wanted to do thorough te