The backup of my system failed due to databases, which could not be found

The backup of my system failed because the files named wbengine.exe could not be found.
How can I repair this ??
Peter Boerema

Read the Microsoft KB @ http://support.microsoft.com/kb/981851
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

  • HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

    Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
    Many thanks
    Anthony

    Try this Discussion...
    https://discussions.apple.com/message/18783684#18783684

  • HT3275 how do i fix this error - The backup disk image "/Volumes/My Passport/EDS MAC.sparsebundle" could not be created (error 1).

    When trying to use Time Capsule on my passport I get this message
    The backup disk image “/Volumes/My Passport/EDS MAC.sparsebundle” could not be created (error 1).

    That should be a C9 or C17 error.. see
    http://pondini.org/TM/Troubleshooting.html
    Try rebooting everything.. as something has lost connection.. perhaps.
    Make sure the disk is actually available in finder.. and try mounting it.

  • I get an error mess when trying to complete backup "The backup disk image "/Volumes Time Capsul MacBook Pro.sparsebundle" could not be accessed (error -1).

    When trying to use my time machine got an error message "Time Machine could not complete the backup. 
    The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
    Any ideas?

    I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.

  • I keep getting this error The backup disk image "/Volumes/Data/APPLE's iMac.sparsebundle" could not be accessed (error -1)

    I have two Imacs backing up to a time capsule and I keep getting this error on one of them The backup disk image “/Volumes/Data/APPLE’s iMac.sparsebundle” could not be accessed (error -1). How do I resolve this?

    See #C17 in Time Machine -- Troubleshooting by Pondini, our resident expert on Time Machine.
    http://pondini.org/TM/Troubleshooting.html

  • HT3275 The backup disk image "/Volumes/Data/Ence's iMac.sparsebundle" could not be accessed (error -1).

    I recently obtained the 3 TB time capsule and after setting it up I have backed up using time machine and after a few days it gives this error.  I erased the drive and started over but the same thing happened.  I do not see the error message that I get listed in the articles.  Any ideas?
    Error message - The backup disk image “/Volumes/Data/Ence’s iMac.sparsebundle” could not be accessed (error -1).

    The best "articles" by far are those provided by Time Capsule and Time Machine guru Pondini.
    He's the guy that Apple calls when they can't figure things out.
    Check out # C17 in Time Machine - Troubleshooting
    http://pondini.org/TM/Troubleshooting.html
    Other good stuff you should have:
    Time Machine - Frequently Asked Questions    http://pondini.org/TM/FAQ.html
    Using Time Machine with a Time Capsule     http://pondini.org/TM/Time_Capsule.html

  • The Database Connection could not be found

    Hi guys,
    we did a complete new installation of EPM 11.1.2.1 for a testing environment.
    Did the installation 1-1 to our production system.
    But on TEST we have the problem to create database connections:
    Tools > Database Connection Manager > New Database Connection > Fails:
    8001: The Database Connection could not be found: -15da10bd_1378bcfb29f_-7d2c
    Any ideas?
    I am Admin and have all privileges.
    The problem exists for Essbase connections and HFM, too.
    Regards,
    Bernd

    Are you using a NAS share for storing reporting and analysis files? I mean the RM1 folder?

  • Workspace Error 8001: The Database Connection could not be found

    We had to reboot all our windows servers recently and since then all the database connections in the database base manager in workspace are gone.
    I can see all the existing reports but cannot use any of them as I dont have any connections.
    Also I cannot create any new connections
    I get the error 8001: The Database Connection could not be found: 13cbd63_12b5e2a8b73_-7f8f when I try to create a new connection.
    Not sure what the problem is.
    Any suggestions?

    Hi Pat,
    It loks like your Biplus relational DB is corrupted, try with those steps:
    1. De-register BI+ from Shared Services (Config Utility->Hyperion Reporting and Analysis > Deregister from Shared Services)
    2. Configure against the backup database (Drop and recreate tables option).
    3. Re-register BI+ with Shared Services.
    4. Re-deploy BI+.
    5. Test Workspace and add new connections.
    Regards.

  • When opening the Coloursync utility and pressing the verify button, I received an error message stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?

    When opening the Coloursync utility and pressing the verify button, I received an error message (copy below) stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?
    Checking 25 profiles...
    /Library/ColorSync/Profiles/Displays/iMac-00000610-0000-9C6C-0000-000004271B00.i cc
       Tag 'cprt': Text tag has an incorrect length.
       The file is locked. Could not be fixed.

    Hi guys,
    I followed the steps to unlock the .icc file in the "getinfo" screen then went on clicking repair in colorsync utility.
    This is the message i got:
    Searching for profiles...
    Checking 17 profiles...
    /Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
       Tag 'cprt': Text tag has an incorrect length. Fixed.
    Repair done - 1 profiles fixed.
    However, when i hit verify again it shows up like this:
    Searching for profiles...
    Checking 17 profiles...
    /Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
       Tag 'cprt': Text tag has an incorrect length.
    Verify done - found 1 bad profile.
    ... and it keeps like this sine die.
    when i open the .icc file it shows up like this:
    3     'cprt'     'text'     35     Copyright ASCII Text String
    New to mac so I really don't know what to do.
    I didn't get this message so far. What i did before getting this message was to open a jpeg file. I wanted to edit it so when i did right click on the file i went to open with, and colorsync came as an option; so i chose it.
    Then this message started comming up.
    Is there anything i can do?
    Thabks for the support.

  • PRCD-1120 : The resource for database dwhpd1 could not be found.

    OEL 5.1
    11.1.0.6 Oracle database RAC
    11gR2 Grid
    Hi,
    I have installed 11gR2 grid with ASM and restored/recoverd a 11gR1 database. The 1st node is up using asm but when I check with svrctl I get errors :
    [oracle@avgrac01 admin]$ /u01/app/11.2.0/grid/bin/srvctl status database -d dwhpd1
    PRCD-1120 : The resource for database dwhpd1 could not be found.
    PRCR-1001 : Resource ora.dwhpd1.db does not exist
    I have read that it's something to do with SCAN and the remote listeners.
    Please can someone point me in a direction/document/help, please

    798188 wrote:
    OEL 5.1
    11.1.0.6 Oracle database RAC
    11gR2 Grid
    Hi,
    I have installed 11gR2 grid with ASM and restored/recoverd a 11gR1 database. The 1st node is up using asm but when I check with svrctl I get errors :
    [oracle@avgrac01 admin]$ /u01/app/11.2.0/grid/bin/srvctl status database -d dwhpd1
    PRCD-1120 : The resource for database dwhpd1 could not be found.
    PRCR-1001 : Resource ora.dwhpd1.db does not exist
    I have read that it's something to do with SCAN and the remote listeners.
    Please can someone point me in a direction/document/help, pleaseHi,
    This error means database is not registered in OCR
    If the database was not registered in the OCR, after restoring the database you must manually add the database in the OCR (add database and instances)
    http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#RACAD5011
    http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#i1008526
    About integrate 11.1 with SCAN 11.2 you must use note below:
    How to integrate a 10g/11gR1 RAC database with 11gR2 clusterware (SCAN) [ID 1058646.1]
    Hope this helps,
    Levi Pereira

  • The form template failed to load. IAssociation could not be found using criteria

    Hello,
    I'm using the project used in  the "TechEd OSP309 Session" to integrate CRM 2011 with SharePoint 2010.
    I successfully made the integration. I can create external lists in SharePoint, execute de CRUD operations and submit them to CRM. Also the entities relations are shown with the entity picker, this works 100%.
    What i'm trying to do now is edit the form with InfoPath. The only thing I'm doing is opening the form in InfoPath, and publish it to SharePoint.
    The problem occurs when trying to edit a item with the new form. I receive the folowing error:
    "The form template failed to load. (User: XXXX, Form Name: Template, IP: , Request:XXX, Form ID: urn:schemas-microsoft-com:office:infopath:entity:-AutoGen-XXX, Type: DataAdapterException, Exception Message: IAssociation could not be found using criteria
    'Name=XXX'.
    IAssociation could not be found using criteria 'Name=XXX'.). "
    Any suggestion? What is causing this problem? This only happens in entities with reference to other entities.

    When trying to view the InfoPath form for the a SharePoint list (on PWA), we are getting the error:
    Correlation ID:e40f2d85-dbe3-4659-9786-a9f69a406ec6.  
    The event log shows:
    The form template failed to load. (User: POET\dgreenwaldt, Form Name: Template, IP: , Request: http://stanzadev2/ResearchPWA/Lists/Project Economics/AllItems.aspx, Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2012-10-22T19:08:52:974Z, Type:
    ArgumentException, Exception Message: Value does not fall within the expected range.)
    The form worked perfectly fine for several days and then started throwing this error.
    Since this started happening, it can now be reproduced in other lists using a custom InfoPath form, but only seems to occur when editing the item, not adding a new one.
    Steps:
    1. Create a custom list on PWA.
    2. Customize the form in InfoPath.
    3. Add a new item via the form (on PWA, not in InfoPath filler).
    4. Edit the item and the error occurs.
    I have the same issue. do you have a resolution?

  • MDT 2013 import OS fail. Part of path could not be found

    Hi all
    I have installed MDT 2013 on a Server 2012 R2 machine and I am having trouble importing any OS. I get an error Part of the path could not be found. If I try and create the directory for MDT it complains and will not let me continue. If the directory is not
    there it complains that the directory cannot be found. here is the complete error that is generated.
    Performing the operation "import" on target "Operating system".
    System.Management.Automation.CmdletInvocationException: Could not find a part of the path 'C:\DeploymentShare\Operating Systems\Windows 7 x64'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\DeploymentShare\Operating Systems\Windows
    7 x64'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileSystemEnumerableIterator`1.CommonInit()
       at System.IO.FileSystemEnumerableIterator`1..ctor(String path, String originalUserPath, String searchPattern, SearchOption searchOption, SearchResultHandler`1 resultHandler, Boolean checkHost)
       at System.IO.DirectoryInfo.InternalGetFiles(String searchPattern, SearchOption searchOption)
       at Microsoft.BDD.PSSnapIn.Utility.DeleteDirectory(String theDirectory, Boolean recursive)
       at Microsoft.BDD.PSSnapIn.ImportOperatingSystem.Import(String sourcePath, String directoryName, Boolean moveDirectory)
       at Microsoft.BDD.PSSnapIn.ImportOperatingSystem.ProcessRecord()
       at System.Management.Automation.CommandProcessor.ProcessRecord()
       --- End of inner exception stack trace ---
       at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
       at Microsoft.BDD.Wizards.OperatingSystemProgress.WizardProcessing()
       at Microsoft.BDD.Wizards.WizardProgress.InitiateWizardProcessing()
    This particular image is Windows 7 custom.
    Any help would be greatly appreciated.
    Thanks
    Tim Jardim
     

    It is possible that you are hitting the 265 char MAX_PATH Limit.
    Ensure that your Deployment share, is not longer than say... 30 chars on your host machine:
    d:\Deployment\MDT\TestPath\Version10  <- MIght be too long
    d:\Deployment.32423  <- Try this instead
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • After I updated my iPhone with IOS 6.1 my old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. On the Apple site the Manage my Apple ID says my old Apple ID could not be found. How do I get this to stop?

    I just updated my iPhone with the newest update IOS 6.1. My old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. All the passwords I type in do not work. I no longer have access to this email which is my old Apple ID. After installing the newest software update my old Apple ID came up to finish configuring. Since I no longer have access to this Apple ID and email account and after trying some passwords I skipped the step. It then said FaceTime, iCloud (which I do not use), and more may not work. I clicked that it was OK since I could not remember the password to my old Apple ID. I then went to my settings to be sure my newer email was my Apple ID by typing in my current Apple ID and password.  Also, I went to Manage my Apple ID online and my old Apple ID could not be found. Is it OK I skipped that step in the IOS 6.1 configuration? How do I get my old Apple ID to stop popping up?

    Blue
    It sounds like you restored from an old back-up.  Did you back-up just before your software update?  It will use your last one and if your last back-up was a ywear old then it will use that one.
    In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
    Sorry for your losses.
    Cheers

  • Error messages "iTunes could not back up iPhone because the backup may be corrupted..." "1 item could not be synced. See iTunes for more information. Not syncing music.

    I'm a recent iPhone 4 user and I just upgraded through AT&T to the 16gb iPhone 5s. The employee at the AT&T store who hooked my family up with phones, told me I could start out with a new phone or back it up to my iPhone 4. So I get home and it takes awhile to back up both phones, so after half an hour, I noticed that my Nirvana albums "In Utero" and "Nirvana" were not syncing. In Utero has twelve tracks, and it would not sync the twelfth track "All Apologies", it would ultimately stop at that track. It would also not sync AT ALL the late Nirvana album. Now, I've tried backing them both up again and I tried updating both phones. But it was only Nirvana not being synced. Now my whole library is corrupt. I have four artists on my phone, six albums, and 78 songs total. That isn't really much...
    I really need help, this is frustrating me because I literally live off of music. I love my new iPhone, I really do, but I've tried literally everything under the sun to sync my music. That's the only problem.
    Thanks to anyone who helps.

    Same problem here too... it's driving me nuts. I share an imac with my boyfriend and we both have iphones and never had a problem syncing or backing up. Then, suddenly, we get the message stated above... but only when backing up HIS phone, a 3GS (mine is a 3G). We have tried everything:
    Deleting the backups and trying to create new
    Changing permissions on all of the backup folders once, twice, 3 times over...
    Changing the name of the backup folder so that iTunes creates a new backup folder
    Creating a new user account for him in the mac os with his own iTunes backup folder and his own permissions.
    NONE of these things worked. The closest we got was in the last attempt of creating a new user account, where it actually CREATED the backup (there is a backup file in the proper folder that is about 4gb in size) but we still get the error message at the end, and the backup is not found in iTunes under device preferences.
    This is extremely frustrating to say the least and I hope somewhere out there has a solution.

  • HI. I'M TRYING TO BACK UP FROM A MAC OS TEN LION TO A TIME CAPSULE, BUT IT GIVES THE MESSAGE AN IMAGE OF THE backup DISK "/Volumes/Data/MacBook Pro de Francinaldo.sparsebundle" COULD NOT BE ACESSED (erroR -1). HELP ME PLEASE!

    How do i solve this issue?

    See #C17 in Pondini's excellent support document Time Machine - Troubleshooting
    http://pondini.org/TM/Troubleshooting.html

Maybe you are looking for