The best way to get reports 6i output into Excel 97
Hi there,
I have a number of graphical reports that have a few group levels. These generate HTML or PDF output ok.
I want to get the output to look as close to the HTML/PDF output from Report Server or Runtime into Excel 97.
Outputting as HTML and importing into Excel does not work very well as Excel places all the horizontal data into one cell! This works perfectly in Excel 2000 but our client does not have this licenced so it is not a solution.
I have thought about outputting as delimited output. This has the effect of placing all the parent group information on each detail line (it is like the group by clause has been removed if you did something similar in SQL*Plus) along with all the prompts and it looks a real mess and takes up many columns in Excel 97.
What is the best way to approach this?
Cheers,
John
If this is a client/server app, then you could use ole or dde to put the data directly into Excel.
Chad
Similar Messages
-
Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.
Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
You chance of getting it back is very small.
There are a few things you can try.
Try remote lock/wipe your iPhone through Find My iPhone.
https://www.icloud.com
You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
http://support.apple.com/kb/HT2526 -
The best way to get 5.1 sound out of Mac Pro
Hello. I'm not sure if this is the right place to ask this, but could someone recommend me the best way to get 5.1 sound of a Mac Pro. Since I don't require hi-fi -level sound, just simple directional audio for gaming and such, I wouldn't like to pour a lot of money to this. As I see it, I'd need an external sound card, internal PCI-E soundcard or speakers that have an optical input. I would like for the cost to be in two digits, euro or dollar.
Any suggestions about hardware?Once again, the issue of 5.1 w/Apple comes up.
Here is the bottom line.
You will only get 5.1 audio if the following conditions are true:
- You are using the OPTICAL output on your Mac
- You are playing a DVD with a 5.1 soundtrack
That's it. The simple truth is, that even if you have a Z-5500 setup (like I do), you still will not get 5.1 surround in ///any/// applications other then while playing a DVD.
There is no way to get 5.1 out of a game on a Mac Pro. No matter how much money you throw at it. The support simply is not there. It is not a software issue, it is not a driver issue. It is the game developer's issue (sort of), and it is a //lack of hardware// issue.
The complex truth, and I will attempt to explain, isn't that simple.
Your Mac Pro or Macbook only has a single line-out, that supports 2 channels at the maximum. Optical audio will only handle 2 channels as well- it's the same signal (in two channels) on a different medium, basically.
All PC soundcards that support proper 5.1 (save for a select few) have //multiple// line-out jacks for Front Left/Right, Center/Sub, and Rear Left/Right (3 plugs total for 5.1). Since your Mac/Mac Pro doesn't have this, you can't hook up a 5.1 speaker set and expect true 5.1.
You do have optical audio, however, this only works in 5.1 when a Dolby Digital signal is piped through the optical cable.
Dolby Digital works by encoding a 5.1 signal as a data stream, sending it to a receiver, where it is decoded and played back as 5.1 stereo. DVD's have this audio pre-encoded on the disk.
If you wanted 5.1 output from your games, they'd need to ether have the sound/audio data encoded as Dolby 5.1, or support encoding on the fly to take a 5.1 signal, encode it, and pipe it out the optical audio plug. Xbox360 does this, because they've licensed the technology from Dolby- as have the game developers.
Unfortunately, none of the developers for Macintosh gaming have yet to include live Dolby 5.1 encoding (I think Doom 3 had a beta patch that did- I could be wrong).
If the game doesn't support the above feature, then you only get basic 2 channel audio.
*Do not buy a Fireface 800.*
This is a professional audio interface (like an external soundcard). While it supports 5.1 output via 6 individual outputs, you need SPEAKERS that have +built in amplifiers+ (called a Studio Monitor). Not just one amplifier- all the speakers have it built in and take a balanced stereo input.
You're looking at $1300 for the Fireface 800, and another $200 per speaker. This is not cheap, is not meant for gaming, and is not consumer grade equipment. It's pro audio, designed for Logic 8 and similar.
Even if you did spend the money, trust me, I'd know... I have a 5.1 setup running through an Apogee Ensemble (a $2000 "soundcard"), and I do not get 5.1 support from Quake 4, C&C 3, or any other game. I only get 5.1 surround from my audio production in Logic 8.
To recap, since this has been asked many times- and I don't want you wasting your money here (just trying to be helpful!)...
*There is no simple or cost-efficient way to get 5.1 from your Mac, other then while playing a DVD movie.*
I would highly recommend that you buy a very good pair of 2.1 speakers with a Sub woofer. Maybe even a pair that takes an optical input for audio. If you really want to spend the money to *watch a DVD in surround sound,* then you can... And it'll work wonderfully, but gaming will not give you surround sound at all.
*Again- There are no games out that support 5.1. Just because you technically support Dolby 5.1, doesn't mean the applications are aware of it and can utilize the 5.1 surround.*
Edit: I may have neglected to also mention that the Firewave unit will support 5.1 properly through 3 separate plugs (much like a PC soundcard does), however the only game I am aware of that supports this is Unreal Tournament 2003 for Mac (or was it 04?), with an experimental patch for 5.1 via OpenAL. Last I heard, it worked okay, but crashed occasionally.
Most of the other games out there just don't support 5.1, period (probably due to the lack of hardware on the Mac computers from the factory).
-SC
Message was edited by: ScottishCaptain -
What's the best way to get user testing of our app (we're based in the UK)
Hi all.
We've just developed our first app for Palm and would really like to get some feedback from Palm users (our app allows users to take photos and send them as real printed postcards. We'd be very happy to give users free postcards in exchange for feedback).
The problem we have is that Palm users are pretty sparse in the UK. We've found that user testing with non-Palm users becomes handset testing rather than app testing. We have to teach them how to use Palm ("Where's the back button?") and so the testing mainly focuses on the particularities of Palm rather than our app. Plus, we don't benefit from the user being able to compare to other Palm apps.
Any advice on the best way to get feedback from Palm users? Especially as they'll need to download the SDK and install our app using it in order to get it onto their phones.
If any of the users of this forum are interested in giving the app a go and sending us feedback, I'd love to send you the IPK and then chat. Just send me an email using [email protected]
Our app is available for Pixi+, Pre+ and Pre2.
Thanks,
Freddie.
Post relates to: Pixi Plus p121ueu (SFR)Hello freddie:
Welcome to the Palm Forums. Thank You for the offer. I highly suggest offering it up
to our many enthusiasts on Twitter as a beta with the #webos hashtag or joining
the Precentral.net community and list it in a topic there, homebrew beta. You would
get better beta response if you Package your app and put it in an ipk to simplify
the install.
Hope that helps... Best of luck with your app!
notimeoff -
What is the best way to get PATHS from one Photoshop psd file to another?
Hi! New on the site, and I signed up specifically to ask the best way to import one .psd file into another, including the paths on the paths palette.
Almost all of my Photoshop drawings make heavy use of vector paths, which I then stroke using using PS natural-media brushes and the "stroke paths" function (usually with "simulate pressure" checked.) Also, my .psd files tend to be, um, HUGE... and I typically break up a whole drawing into separate PS files and then assemble all of them into one final finished graphic.
I have no trouble moving raster stuff from file to file. Just put all the layers I want to transfer into a group and drag the group to the other .psd. Works fine, including layer masks. But I have not found a good way to get vector paths from the Paths palette of one .psd to another. Of course I can select paths and copy them to the Win clipboard, switch to the other .psd, and paste them back in. The drawback to that method is that I lose the correct size relation between the results of previously done "stroke paths" operations (on raster layers) and the paths that generated them. Sometimes the copied-in paths are way too large, sometimes way too small, never Just Right.
As I'm sure most of you know, if you resize an entire Photoshop document from within PS, any paths it contains are correctly resized along with everything else. That's no longer true after grouped raster layers are dragged over to another document but paths are copied and pasted in. The size connection is lost. (Location placement, too.)
I WANT those paths! After I bring a piece of a drawing into the full final drawing, what looked good when I was working on it separately often doesn't look right any longer and I want to re-stroke those paths using different brush diameter, opacity, etc., or maybe even a completely different brush.
I've tried bring outside .psd files in as smart objects with the Place command but either that doesn't work or I'm not doing it right. Using Place, the paths in the Placed document don't come in at all.
I'll be very grateful for any hints or strategies any of you knowledgeable folks can give me. Thanks very much!
Jim
Note, PS CS3 extended on Win 7 pro.Denny
1. Connect the two macs - firewire, ethernet, sneakernet as suits you - and copy the iPhoto Library Folder from Old Machine to New Machine. Drag it from Home/Pictures to the same location on the new machine.
2. Because all the files 'belong' to the account on the old machine, you have to update the file permissions: hence Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
Note: This must be run on the new machine after copying the files over.
3. Then launch iPhoto on the new machine.
Regards
TD -
I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again . What is the best way to get complete access to my old hd installed in my new Macbook?
Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.
-
What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera?
What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera? It says the utility disk is a PowerPC app and that is no longer supported. What do I do now? I can't upload photos from my camera.
Also, I had the same problem happen when I tried to install an older version of Corel Painter. Are Macbook Pro users just NOT supposed to be able to use their laptops for the purposes they are best designed for?
-Frustrated new Mac user -
What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.
First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
Please tell me if you have any problems with backing up.
Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
Please tell me if you need any help.
I hoped I answered your questions and solved your problem! -
What's the best way to get a copy of Final Cut 7?
Amazon.
Apple stoped selling it officially 20 months ago. -
I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ... -
What is the best way to get rid of duplicates in the XML data?
Hi all,
Please help me with the best way to get rid of the duplicates in the XML data. Will a transform with some stylesheet do the trick? I need to read on the stylesheet first, but please tell me if that is possible. I have to deal with XML data that has tons of duplicate data. Please see one section of an XML file. You can see that for each charge, the same defendant information (address, ID numbers, etc) is included. Having 10 charges is not uncommon, so I would have the same data repeated 10 times. I first thought that I would use some temp tables to do that, but I wonder if there were a better way. Thanks a lot. Please see the data below.
Ben
<ChargeDispositionNotification>
<TriggeredDateTime>2006-06-20T08:21:31-05:00</TriggeredDateTime>
<NotificationEvent>DispositionAdded</NotificationEvent>
<ChargeDisposition chargeKey="622212">
<Charge chargeKey="622212" chargeVersionKey="2320743">
<ChargeSequenceID>1</ChargeSequenceID>
<ChargeFiledDate>2006-06-20</ChargeFiledDate>
<ChargeStatuteOrdinanceRule statuteKey="719">
<StatuteOrdinanceRuleCite>609.222.1</StatuteOrdinanceRuleCite>
<SeverityLevel>Felony</SeverityLevel>
<ChargeLegalDescriptionText>Assault-2nd Degree-Dangerous Weapon</ChargeLegalDescriptionText>
<MinnesotaOffenseCode>M1000</MinnesotaOffenseCode>
<ChargeDescriptionText>Assault-2nd Degree-Dangerous Weapon</ChargeDescriptionText>
</ChargeStatuteOrdinanceRule>
<ChargeSubjectReference partyKey="558357"/>
<ChargePlea>
<PleaDate>2006-06-20</PleaDate>
<PleaJudge judgeKey="00553C">
<JudgeName>
<PersonGivenName>Thomas</PersonGivenName>
<PersonMiddleName>William</PersonMiddleName>
<PersonSurName>Bibus</PersonSurName>
<PersonFullName>Bibus, Thomas William</PersonFullName>
</JudgeName>
<JudicialAgencyIdentifier>MN025015J</JudicialAgencyIdentifier>
</PleaJudge>
<PleaDescriptionText>Not guilty</PleaDescriptionText>
</ChargePlea>
</Charge>
<DispositionEvent>
<ChargeDispositionDate>2006-06-20</ChargeDispositionDate>
<ChargeDispositionJudge judgeKey="00553C">
<JudgeName>
<PersonGivenName>Thomas</PersonGivenName>
<PersonMiddleName>William</PersonMiddleName>
<PersonSurName>Bibus</PersonSurName>
<PersonFullName>Bibus, Thomas William</PersonFullName>
</JudgeName>
<JudicialAgencyIdentifier>MN025015J</JudicialAgencyIdentifier>
</ChargeDispositionJudge>
<ChargeDispositionText>Convicted</ChargeDispositionText>
<ChargeDispositionSeverityLevel>Felony</ChargeDispositionSeverityLevel>
<ChargeDispositionComment>This is the disposition comment</ChargeDispositionComment>
</DispositionEvent>
<CourtCaseNumber>
<MNCISCaseNumber>
<CountyNumber>10</CountyNumber>
<CaseType>CR</CaseType>
<YearFiled>06</YearFiled>
<SequenceNumber>367</SequenceNumber>
</MNCISCaseNumber>
<CaseNumberIdentifier caseNumberKey="10CR06367">10-CR-06-367</CaseNumberIdentifier>
</CourtCaseNumber>
<CaseDefendant partyKey="558357">
<PersonID>325193</PersonID>
<PartyName partyKey="558357" currentNameIndicator="true">
<StandardName>
<PersonGivenName>James</PersonGivenName>
<PersonMiddleName>John</PersonMiddleName>
<PersonSurName>Jetson</PersonSurName>
<PersonFullName>Jetson, James John</PersonFullName>
</StandardName>
</PartyName>
<PartyAddress partyCorrespondenceIndicator="true" partyKey="558357" currentKnownAddress="true" undeliverableIndicator="false">
<AddressUSStandard>
<AddressStreetNumber>abc</AddressStreetNumber>
<AddressPreDirectional>Northeast</AddressPreDirectional>
<AddressStreet>1st</AddressStreet>
<AddressStreetType>Boulevard</AddressStreetType>
<AddressPostDirectional>Southeast</AddressPostDirectional>
<AddressUnit>
<AddressUnitType>Building</AddressUnitType>
<AddressUnitNumber>3333333333</AddressUnitNumber>
</AddressUnit>
<AddressCity>St. Paul</AddressCity>
<AddressState>MN</AddressState>
<AddressZipCode>555551234</AddressZipCode>
</AddressUSStandard>
</PartyAddress>
<PartyBirthData currentBirthdate="true">
<PersonBirthDate>1991-12-11</PersonBirthDate>
</PartyBirthData>
<InterpreterNeededIndicator>false</InterpreterNeededIndicator>
<PersonAssignedIDDetails>
<PersonSSNID>
<ID>111-00-1101</ID>
</PersonSSNID>
<PersonDriverLicenseID currentDriverLicenseIndicator="true">
<ID>J-111-000-111-001</ID>
<IDJurisdictionText>Minnesota</IDJurisdictionText>
</PersonDriverLicenseID>
<PersonFBIID>
<ID>FBIMNJ001</ID>
</PersonFBIID>
<PersonStateID>
<ID>MNJ0001</ID>
</PersonStateID>
</PersonAssignedIDDetails>
<PersonPhysicalDetails>
<PersonSexText>Male</PersonSexText>
</PersonPhysicalDetails>
<RepresentedBy>
<ProSeIndicator>true</ProSeIndicator>
</RepresentedBy>
</CaseDefendant>
</ChargeDisposition>
</ChargeDispositionNotification>
<ChargeDispositionNotification>
<TriggeredDateTime>2006-06-20T08:21:31-05:00</TriggeredDateTime>
<NotificationEvent>DispositionAdded</NotificationEvent>
<ChargeDisposition chargeKey="622213">
<Charge chargeKey="622213" chargeVersionKey="2320744">
<ChargeSequenceID>2</ChargeSequenceID>
<ChargeFiledDate>2006-06-20</ChargeFiledDate>
<ChargeStatuteOrdinanceRule statuteKey="717">
<StatuteOrdinanceRuleCite>609.221.1</StatuteOrdinanceRuleCite>
<SeverityLevel>Felony</SeverityLevel>
<ChargeLegalDescriptionText>Assault-1st Degree-Great Bodily Harm</ChargeLegalDescriptionText>
<MinnesotaOffenseCode>B1000</MinnesotaOffenseCode>
<ChargeDescriptionText>Assault-1st Degree-Great Bodily Harm</ChargeDescriptionText>
</ChargeStatuteOrdinanceRule>
<ChargeSubjectReference partyKey="558357"/>
<ChargePlea>
<PleaDate>2006-06-20</PleaDate>
<PleaJudge judgeKey="00553C">
<JudgeName>
<PersonGivenName>Thomas</PersonGivenName>
<PersonMiddleName>William</PersonMiddleName>
<PersonSurName>Bibus</PersonSurName>
<PersonFullName>Bibus, Thomas William</PersonFullName>
</JudgeName>
<JudicialAgencyIdentifier>MN025015J</JudicialAgencyIdentifier>
</PleaJudge>
<PleaDescriptionText>Not guilty</PleaDescriptionText>
</ChargePlea>
</Charge>
<DispositionEvent>
<ChargeDispositionDate>2006-06-20</ChargeDispositionDate>
<ChargeDispositionJudge judgeKey="00553C">
<JudgeName>
<PersonGivenName>Thomas</PersonGivenName>
<PersonMiddleName>William</PersonMiddleName>
<PersonSurName>Bibus</PersonSurName>
<PersonFullName>Bibus, Thomas William</PersonFullName>
</JudgeName>
<JudicialAgencyIdentifier>MN025015J</JudicialAgencyIdentifier>
</ChargeDispositionJudge>
<ChargeDispositionText>Convicted</ChargeDispositionText>
<ChargeDispositionSeverityLevel>Felony</ChargeDispositionSeverityLevel>
<ChargeDispositionComment>This is the disposition comment</ChargeDispositionComment>
</DispositionEvent>
<CourtCaseNumber>
<MNCISCaseNumber>
<CountyNumber>10</CountyNumber>
<CaseType>CR</CaseType>
<YearFiled>06</YearFiled>
<SequenceNumber>367</SequenceNumber>
</MNCISCaseNumber>
<CaseNumberIdentifier caseNumberKey="10CR06367">10-CR-06-367</CaseNumberIdentifier>
</CourtCaseNumber>
<CaseDefendant partyKey="558357">
<PersonID>325193</PersonID>
<PartyName partyKey="558357" currentNameIndicator="true">
<StandardName>
<PersonGivenName>James</PersonGivenName>
<PersonMiddleName>John</PersonMiddleName>
<PersonSurName>Jetson</PersonSurName>
<PersonFullName>Jetson, James John</PersonFullName>
</StandardName>
</PartyName>
<PartyAddress partyCorrespondenceIndicator="true" partyKey="558357" currentKnownAddress="true" undeliverableIndicator="false">
<AddressUSStandard>
<AddressStreetNumber>abc</AddressStreetNumber>
<AddressPreDirectional>Northeast</AddressPreDirectional>
<AddressStreet>1st</AddressStreet>
<AddressStreetType>Boulevard</AddressStreetType>
<AddressPostDirectional>Southeast</AddressPostDirectional>
<AddressUnit>
<AddressUnitType>Building</AddressUnitType>
<AddressUnitNumber>3333333333</AddressUnitNumber>
</AddressUnit>
<AddressCity>St. Paul</AddressCity>
<AddressState>MN</AddressState>
<AddressZipCode>555551234</AddressZipCode>
</AddressUSStandard>
</PartyAddress>
<PartyBirthData currentBirthdate="true">
<PersonBirthDate>1991-12-11</PersonBirthDate>
</PartyBirthData>
<InterpreterNeededIndicator>false</InterpreterNeededIndicator>
<PersonAssignedIDDetails>
<PersonSSNID>
<ID>111-00-1101</ID>
</PersonSSNID>
<PersonDriverLicenseID currentDriverLicenseIndicator="true">
<ID>J-111-000-111-001</ID>
<IDJurisdictionText>Minnesota</IDJurisdictionText>
</PersonDriverLicenseID>
<PersonFBIID>
<ID>FBIMNJ001</ID>
</PersonFBIID>
<PersonStateID>
<ID>MNJ0001</ID>
</PersonStateID>
</PersonAssignedIDDetails>
<PersonPhysicalDetails>
<PersonSexText>Male</PersonSexText>
</PersonPhysicalDetails>
<RepresentedBy>
<ProSeIndicator>true</ProSeIndicator>
</RepresentedBy>
</CaseDefendant>
</ChargeDisposition>
</ChargeDispositionNotification>ds store wrote:
ClamXav is only a scanner, it can't remove the MacDefender malware.
Yes, it can. ClamXav scans and quarantines it. It was updated.
http://www.reedcorner.net/news.php/?p=98
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?
Appreciate your assistance.The answer depends on whether the AirPort Extreme is your main router....or...the Linksys device is your main router.
In either case, the two devices must connect together using a wired Ethernet connection using CAT5e or CAT6 cabling.
Any version of the AirPort Extreme produced within the last 5 years will have Gigabit Ethernet ports. In order to get the same speeds from the Linksys router, it will also need to be Gigabit Ethernet capable.
If you need additional Ethernet ports, you will need to add a Gigabit Ethernet switch to either the AirPort Extreme or Linksys router.
It is assumed that your other devices connecting to the AirPort Extreme and Linksys router will also have Gigabit Ethernet capability.
Not sure why you mention "ac" speeds in your post. This relates to wireless connections, not wired. -
I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about: so I don't loose any of my photos/keywords? Who can help?
The Bridge General Discussion can give you the specifics of transferring your information over to Bridge CS6.
-
When I'm done with my fcp sequence, whats the best way to get it to dvd?
When I'm done with my fcp sequence, whats the best way to get it to dvd?
The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
The advice to go to iDVD is even easier.
bogiesan -
Whats the best way to get dvd onto 5800
Peoples,
I'm strugglin to get DVD onto my noka 5800. It's not obvious in the user manual and looking around the web i need to 'convert' it to the fim on.
Please does anybody have an easy, fool proof way of doing this??????
Message Edited by blueleaches on 21-Aug-2009 06:02 PMIf its possible there should be some walkthrough's on google.
http://www.lmgtfy.com/?q=whats+the+best+way+to+get+dvd+onto+5800
Maybe you are looking for
-
Is it possible to install a HDD from a 2012 Mac Mini into my 2010 MBP?
I'm thinking of upgrading the hard drive in my 2010 Macbook Pro and I had the idea that instead of this I could upgrade the hard drive in my late 2012 Mac Mini and use the original Mac Mini drive in my MBP. Is this doable? Would there be any issues w
-
hi, Can you please tell me what are the inputs to be taken in the function module SXMB_GET_MESSAGE_PAYLOAD. Thanks, Shreya.
-
Hi all, my mail account will not recieve mail but can send, when I hook up my old windows computer with the same mail settings the mail comes thru to that computer. the mail has been working fine on the Mac but not now, I tried to send a large file i
-
I need to convert several values to Byte Arrays so that they can be transmitted in a DataGramPacket. One of these values is a Double. What is the best way to do this? The data contained in the double needs not have a scale greater than 4. With other
-
Statistics (overview) for Synchronous messages processed via AAE
Hello, We are on PI 7.11 Is there any way to get synchronous messages processed via AAE displayed on RWB Message Monitor Overview view? Maybe there is some parameter available similar to messaging.syncMessageRemover.removeBody for persisting payloads