The boundaries of the screen of my iPhone 5S started twinkling and it has problems connecting to wifi (both problems appeared at the same time), does anybody know what to do?

I have an iPhone 5S, I charged it this morning and after that I noticed that it had two problems:
1- It detects and connects to wi-fi but has no internet connection (it´s not a problem with the Wi-Fi because it works OK)
2- The bottom and the sides of the screen started twinkling, it lookes like the distortions that appear when you touch a plasma screen.
Does anybody know why this happened and how can I fix it?

Hello, FlorPochi. 
Thank you for visiting Apple Support Communities.
This sounds like you may be experiencing a self-assigned IP address.  Try power cycling your router and testing the results.  If the issue persists, I would recommend going through all of the steps in the article below.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
I would go through the steps for display issues in the link below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If the issue persists, see the last section labeled Issue not resolved.
Cheers,
Jason H.

Similar Messages

  • HT204053 Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is

    Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is going on?

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • My iphone 5 dies at 50% battery, and our 4 chargers have all stopped charging within the same week.  anybody know what could be the issue?  its like our apples are having a major meltdown! help!

    Help!  My iPhone 5 has recently started to "die" at about 20 or 30% battery depending on where I am or how cold it is (i.e.it doesnt seem to die as fast with Wifi in my apartment but will drain so quickly and die at 40% battery life when i am at work.  So today, my battery died at 56% YES 56%!!! GRRRRR.  I have tried everything online articles tell you to do in order to conserve battery life.  Also, our chargers have all gone caput this past week.  I believe it is the adaptor as when the cord plugs into the computer it will charge.  WT?  All our apple products have gone berzurk this last week and I beg for an answer!!  The phone is over one year old, along with one charger.  But the other TWO chargers were purchased recently and they all stopped this week.  Any guidance or help with fixing this the most cost effective way would be much appreciated!

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    Everything that cames in the box is included in the 1year warranty, unfortunately you're just outside of that warranty.  Regardless, if the above troubleshooting does not resolve, take the device to Apple and they can determine if the issue is the device, the charger(s) or something else.

  • I have been using the kindle app to load books on my ipad. For the past two days I cannot access those books. I might get one page to show then the screen will freeze and I can't turn the page. Does anybody know what is going on. Help!

    For the past two days I cannot access my kindle books on my ipad. I might be able to get one page of a book to appear but then it freezes and I can't turn the page. I tried turning my ipad completely off and then on again. Any ideas to fix this?

    Start by doing a reset ,you will not lose any data
    hold home /sleep button until Apple logo appears  ignore off slider
    first try closing Kindle App on iPad

  • I can't find the duplicates tab that i always found useful, it seems to have disappeared from the new iTunes, does anybody know what to do next?

    Where has the find duplicates function gone in the new iTunes? It use to be in a drop down task bar menu in the old versions but i can't find it in the latest.
    Also while i am in iTunes mode, when i open iTunes i get a message
    I have checked the Firewall pane of Security & Privacy preferences and the light is green as in allow, yet the message keeps coming up every time i open iTunes, any idea on how to get rid?
    All useful information greatly appreciated.

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • After updating my ipad iOs 7 the sound got lost? Does anybody know what to do ?

    After updating my ipad (iOs7) I got lost the sound. Does anybody know what's the problem?

    Try resetting the iPad first. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go when you see the Apple logo and let the iPad restart.

  • After downloading the latest version of iTunes and updating my iPhone everytime I turn on my computer I get a message that reads: AppleSyncNotifier.exe - Entry Point Not Found. Does anybody know what this means?

    After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.

    Yes.  I just solved the problem on my PC.  Here goes...
    Issue:  My Windows7 computer was producing the pop up box with the error text as you described.
    The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
    Solution: 
    1.  You need to use the Windows File search feature to look for the name "SQLite".  This will quickly locate the offending DLL in the other application.
    2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
    3.  Uninstall Mobile Me.
    4.  Restart your PC.
    5.  Reinstall Mobile Me.
    6.  Mobile Me should sync at this point, but if not, restart the PC once again.
    In my case, the offending program was my Aptana Studio development application.  I had recently the SQLite3 database to my Ruby On Rails configuration...
    This is where the file was located:
    C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
    I hope this helps,
    Ron

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • HT1476 my iphone 4 is only charging while off and everytime i try to reset it it still does the same thing does anyone know how to fix this ?

    my iphone 4 is only charging while off and everytime i try to reset it it still does the same thing does anyone know how to fix this ? ive tried resetting 5 times already , ive tired different plugs and usbs , nothings working

    You will need to contact the app developer if your having problems with a 3rd paty app.  See if they have a support forum.

  • I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means.

    I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means. I'm confused because I don't have a camera hooked up to my computer.

    may you have directly imported clip to timeline without copying it to local drive..
    update project for links and check if missing clips are there..
    reconnect it if you have it on local drive..

  • Everything I own (iPad, iPhone, mac) is set up on wi-fi.  when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!

    Everything I own (iPad, iPhone, mac) is set up on wi-fi.  when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!

    Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
    Another problem is using names that windows does not easily handle.
    eg If you set the TC using apple names, like
    Fred Blog's Airport Time Capsule wireless24ad12
    Then to windows this is too long.. it has spaces and it has illegal character.
    Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
    Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid.

  • My wifes iphone will not allow her to download from the app store when not connected to the computer. Does anyone know what is wrong?

    My wifes iphone will not allow her to download from the app store when not connected to the computer. Does anyone know what is wrong?

    Resetting your Mac's PRAM and NVRAM
    If you have Apple Care you should give them a call.

  • My iPhone 5s is plugged in. It does not show that it is charging but gives the alert "ding" sound every 15-16 seconds. Does anybody know what could be the problem?

    My iPhone 5s is plugged in. It does not show that it is charging but gives the alert "ding" sound every 15-16 seconds. Does anybody know what could be the problem?

    It sounds like it starting to charge, then suddenly stops over and over.  This can happen if the cable or adapter is bad or if your charing port has an issue.
    Try using a different cable and/or wall adapter.  If the issue continues, it's probably the iPhone.  If it does not continue, then it's the cable or adapter.  Continue to swap to see what's bad.
    If you don't have another cable or adapter to test will, take your iPhone and your cable/adapter combo to an Apple Retail Store or Apple Authorized Service Provider.  They can help you narrow the issue down and provide service as indicated. https://locate.apple.com/country

  • HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
    If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
    Russ

  • Does anybody know what the phrase can't find driver mean?

    I have a PowerMac 4,2 and it won't start up for me It goes to a black and white screen and has the words panic,and unable to find driver
    for this platform. Does anybody know what that means,and what do I have to do to fix it. Thank you and have a great day Dale

    It means you have likely installed something for Intel Macs that runs at startup that won't work with that Mac.  If you moved a hard drive with Mac OS X 10.6 or later on it to the Powermac, that would cause such a problem.  If you connected a hard drive with 10.6 or later on it on it that was running Target Disk Mode (booting the Intel machine holding the T key) to it, that would cause such a problem.  If you attempted to install 10.4.4 or later system specific disc on a hard drive that was designed for an Intel Mac, and moved it to that machine, that would cause such a problem.  If you attempted to install a GUID formatted partition hard drive as opposed to Apple partition map on the machine, that could cause such a problem.

Maybe you are looking for