The camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

Similar Messages

Can any one please tell me how to configure the oracle data gaurd. in steps

can any one please tell me how to configure the oracle data gaurd. in steps

Hi,
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
Regards
Yoonas

Can any one please tell me why this e-class is not working

Hi
I want to listen the following e-class. But its not running. Can any one please tell me why its not working
I have windows media player 11 in my system
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/34b9359e-0701-0010-f59d-ee014d5079b3?prtmode=navigate"></a>
Best Regards
Ravi Shankar B

Hi
I want to listen the following e-class. But its not running. Can any one please tell me why its not working
I have windows media player 11 in my system
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/34b9359e-0701-0010-f59d-ee014d5079b3?prtmode=navigate"></a>
Best Regards
Ravi Shankar B

Can any one please tell me how to write labview program for data logging in electric motor bike.

Can any one please tell me how to write labview program for data logging in electric motor bike. I am going to use CompactRIO for getting wide range of data from various sensors in bike. I need to write labview program for data logging of temperature, voltage and speed of the bike. Can any one help me?

Yes, we can.
I think the best place for you to start for this is the NI Developer Zone. I recommend beginning with these tutorials I found by searching on "data log rio". There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
NI Compact RIO Setup and Services -> http://zone.ni.com/devzone/cda/tut/p/id/11394
Getting Started with CompactRIO - Logging Data to Disk -> http://zone.ni.com/devzone/cda/tut/p/id/11198
Getting Started with CompactRIO - Performing Basic Control -> http://zone.ni.com/devzone/cda/tut/p/id/11197
These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

I am new to Java, can any one pls tell me what exactly is "Build Path".

Hi Techies...
i am new to Java, can any one pls tell me what exactly is "Build Path".
thanx in adv.
Regards
Nitin.V
Edited by: Nitin.V on Feb 12, 2008 11:08 PM
Edited by: Nitin.V on Feb 12, 2008 11:09 PM

The "BuildPath" is a place where all the "resources" referenced by your java program exists.
please visit http://www.u.arizona.edu/~jtmurphy/H2R/java.htm for more info

I have iphone 4g and have updated to ios6 an updated itunes 2, but while sync itunes freezes and iphone is not sybc fully, finally i have to disconnect my iphone for itunes to shunt down. Can some one please tell why this is happening?

I have iphone 4g and have updated to ios6 an updated itunes 2, but while sync itunes freezes and iphone is not sybc fully, finally i have to disconnect my iphone for itunes to shunt down. Can some one please tell why this is happening?

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

Can some one please tell me what is the problem in the below pl/sql block

Hi, I have problem with the following pl/sql block, I need this with bulk operation.
-- Assume the following scenario, we are validating dept (master) and emp(child) which are my temporary tables and updating the status back to
-- dept ( for all the validation errors, even if we have any validation at child it has to update the header record with error message),
-- upon successful validation insert the data into dept3, and emp3 interms of batches
-- I have give the sample example with dept and emp, but i have around 10 million records which has around 30-40 validations,
-- I would like to process them in terms of batches using bulk collection as this would do fast processing
-- Can some one please tell me how to insert them in terms of bulk with every set of 1000 records in each batch in this example,for every set of 1000 records
-- i need update batch id with unique number in dept table
-- with current data i can have 50 batches , I need to pass, deptno as parameter to my emp cursor.
-- can some one please tell me how to make this validation and insertion more efficient. so that while inserting the data for every batch it should insert batch id
-- Tried with LIMIT clause as well but not working
-- I am correcting the code as per your comments Request you to please suggest me so that I can correct , I am new to PL/sql, started learning now.
step - 1:
CREATE TABLE DEPT
       (DEPTNO NUMBER(6) primary key,
        DNAME VARCHAR2(25),
        LOC VARCHAR2(23),
        batch_id number );
INSERT INTO DEPT VALUES (10, 'ACCOUNTING', 'NEW YORK', null);
INSERT INTO DEPT VALUES (20, 'RESEARCH',   'DALLAS', null);
INSERT INTO DEPT VALUES (30, 'SALES',      'CHICAGO', null);
INSERT INTO DEPT VALUES (40, 'OPERATIONS', 'BOSTON', null);
step - 2:
declare
begin
for i in 1..50000 loop
insert into dept values(40+i, 'OPERATIONS'||i,'BOSTON'||i, null);
end loop;
commit;
exception
when others then
dbms_output.put_line('Exception occured:'||SQLERRM);
end;
step - 3:
create sequence emp_seq start with 1 increment by 1;
step - 4:
CREATE TABLE EMP
       (EMPNO NUMBER(15) NOT NULL primary key,
        ENAME VARCHAR2(20),
        JOB VARCHAR2(20),
        MGR NUMBER(4),
        HIREDATE DATE,
        SAL NUMBER(7, 2),
        COMM NUMBER(7, 2),
        DEPTNO NUMBER(6));
INSERT INTO EMP VALUES
        (7369, 'SMITH', 'CLERK',     7902,
        TO_DATE('17-DEC-1980', 'DD-MON-YYYY'), 800, NULL, 20);
INSERT INTO EMP VALUES
        (7499, 'ALLEN', 'SALESMAN', 7698,
        TO_DATE('20-FEB-1981', 'DD-MON-YYYY'), 1600, 300, 30);
INSERT INTO EMP VALUES
        (7521, 'WARD',   'SALESMAN', 7698,
        TO_DATE('22-FEB-1981', 'DD-MON-YYYY'), 1250, 500, 30);
INSERT INTO EMP VALUES
        (7566, 'JONES', 'MANAGER',   7839,
        TO_DATE('2-APR-1981', 'DD-MON-YYYY'), 2975, NULL, 20);
INSERT INTO EMP VALUES
        (7654, 'MARTIN', 'SALESMAN', 7698,
        TO_DATE('28-SEP-1981', 'DD-MON-YYYY'), 1250, 1400, 30);
INSERT INTO EMP VALUES
        (7698, 'BLAKE', 'MANAGER',   7839,
        TO_DATE('1-MAY-1981', 'DD-MON-YYYY'), 2850, NULL, 30);
INSERT INTO EMP VALUES
        (7782, 'CLARK', 'MANAGER',   7839,
        TO_DATE('9-JUN-1981', 'DD-MON-YYYY'), 2450, NULL, 10);
INSERT INTO EMP VALUES
        (7788, 'SCOTT', 'ANALYST',   7566,
        TO_DATE('09-DEC-1982', 'DD-MON-YYYY'), 3000, NULL, 20);
INSERT INTO EMP VALUES
        (7839, 'KING',   'PRESIDENT', NULL,
        TO_DATE('17-NOV-1981', 'DD-MON-YYYY'), 5000, NULL, 10);
INSERT INTO EMP VALUES
        (7844, 'TURNER', 'SALESMAN', 7698,
        TO_DATE('8-SEP-1981', 'DD-MON-YYYY'), 1500, NULL, 30);
INSERT INTO EMP VALUES
        (7876, 'ADAMS', 'CLERK',     7788,
        TO_DATE('12-JAN-1983', 'DD-MON-YYYY'), 1100, NULL, 20);
INSERT INTO EMP VALUES
        (7900, 'JAMES', 'CLERK',     7698,
        TO_DATE('3-DEC-1981', 'DD-MON-YYYY'),   950, NULL, 30);
INSERT INTO EMP VALUES
        (7902, 'FORD',   'ANALYST',   7566,
        TO_DATE('3-DEC-1981', 'DD-MON-YYYY'), 3000, NULL, 20);
INSERT INTO EMP VALUES
        (7934, 'MILLER', 'CLERK',     7782,
        TO_DATE('23-JAN-1982', 'DD-MON-YYYY'), 1300, NULL, 10);
commit;
step :- 5
declare
cursor c1 is select * from dept;
k number:=0;
m number:=0;
begin
for i in c1 loop
k:=k+1;
--dbms_output.put_line('k:'||k);
--dbms_output.put_line('i.deptno:'||i.deptno);
m:=0;
for j in 1..5 loop
m:=m+1;
--dbms_output.put_line('m:'||m);
--dbms_output.put_line('i.deptno:'||i.deptno);
insert into emp values
        (9000+emp_seq.nextval, 'SMITH'||'_'||emp_seq.currval, 'CLERK'||'_'||emp_seq.currval,     7902,
        TO_DATE('17-DEC-1980', 'DD-MON-YYYY'), 800, NULL, i.deptno);
end loop;
end loop;
commit;
exception
when others then
dbms_output.put_line('Exception occured:'||sqlerrm);
end;
step :-6
create table dept3 as select * from dept where 1=2;
create table emp3 as select * from emp where 1=2;
alter table dept add object_id number;
alter table dept add status varchar(20);
alter table dept add err_msg varchar2(200);
alter table emp add object_id number;
-- I have not included the alter statements in the inital creation because i dont want them to insert into dept3 and emp3
CREATE OR REPLACE
PACKAGE test_b
AS
g_batch_id NUMBER;
PROCEDURE emp_ins(
      p_EMPNO    NUMBER,
      p_ENAME    VARCHAR2,
      p_JOB      VARCHAR2,
      p_MGR      NUMBER,
      p_HIREDATE DATE,
      p_SAL      NUMBER,
      p_COMM     NUMBER,
      p_DEPTNO   NUMBER);
PROCEDURE dept_ins(
      p_DEPTNO NUMBER,
      p_dname VARCHAR2 ,
      p_LOC    VARCHAR2,
      p_batch NUMBER);
PROCEDURE validate_prc;
PROCEDURE main;
TYPE dept_t
IS
TABLE OF dept%ROWTYPE;
hdr_tbl dept_t;
TYPE emp_t
IS
TABLE OF emp%ROWTYPE;
line_tbl emp_t;
TYPE dept_i_t
IS
TABLE OF dept3%ROWTYPE;
hdr_ins_tbl dept_i_t;
TYPE emp_i_t
IS
TABLE OF emp3%ROWTYPE;
line_ins_tbl emp_i_t;
END;
-- pacakge body
CREATE OR REPLACE
PACKAGE body test_b
AS
PROCEDURE emp_ins(
    p_EMPNO    NUMBER,
    p_ENAME    VARCHAR2,
    p_JOB      VARCHAR2,
    p_MGR      NUMBER,
    p_HIREDATE DATE,
    p_SAL      NUMBER,
    p_COMM     NUMBER,
    p_DEPTNO   NUMBER)
IS
BEGIN
INSERT
INTO EMP3
      EMPNO ,
      ENAME ,
      JOB ,
      MGR ,
      HIREDATE ,
      SAL ,
      COMM ,
      DEPTNO
    VALUES
      P_EMPNO ,
      P_ENAME ,
      P_JOB ,
      P_MGR ,
      P_HIREDATE ,
      P_SAL ,
      P_COMM ,
      P_DEPTNO
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('EXCEPTION AT EMP INSERT'||SQLERRM);
END;
PROCEDURE dept_ins
    p_DEPTNO NUMBER,
    p_dname VARCHAR2 ,
    p_LOC    VARCHAR2,
    p_batch NUMBER
IS
BEGIN
INSERT
INTO DEPT3
      DEPTNO ,
      DNAME ,
      LOC ,
      batch_id
    VALUES
      p_DEPTNO ,
      p_DNAME ,
      p_LOC ,
      p_batch
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('EXCEPTION AT DEPT INSERT'||SQLERRM);
END ;
PROCEDURE validate_prc
IS
CURSOR c1
IS
    SELECT * FROM dept WHERE status IS NULL ;--AND rownum <25;
CURSOR c2(p_dept NUMBER )
IS
    SELECT * FROM emp WHERE deptno=p_dept;
e_validation EXCEPTION;
BEGIN
OPEN c1;
LOOP
    FETCH c1 BULK COLLECT INTO hdr_tbl limit 5000;
    SELECT emp_seq.nextval INTO g_batch_id FROM dual;
    EXIT
WHEN hdr_tbl.count = 0;
    dbms_output.put_line('batch'||g_batch_id);
END LOOP;
CLOSE c1;
dbms_output.put_line('C1 closed');
--------- Loading data into the inv line table type -------------------------------
FOR i IN 1 .. hdr_tbl.count
LOOP
    dbms_output.put_line('started validation');
    -- do header level validations
    IF hdr_tbl(i).dname IS NULL THEN
      hdr_tbl(i).status := 'ERROR';
      hdr_tbl(i).err_msg :=',DNAME is null';
    END IF;
    OPEN c2(hdr_tbl(i).deptno);
    LOOP
      FETCH c2 BULK COLLECT INTO line_tbl;
      -- EXIT WHEN c2%NOTFOUND;
    END LOOP;
    CLOSE c2;
    FOR j IN 1 .. line_tbl.count
    LOOP
      -- do line validations
      IF line_tbl(j).ename IS NULL THEN
        hdr_tbl(i).status := 'ERROR';
        hdr_tbl(i).err_msg :=',ENAME is null';
      END IF;
      BEGIN
        FORALL j IN line_tbl.FIRST .. line_tbl.LAST
        SAVE EXCEPTIONS
        UPDATE EMP
        SET object_id =3
          -- I have multiple columns to update based on validations
        WHERE deptno =hdr_tbl(i).deptno------------
        AND empno    =line_tbl (j).empno;
        COMMIT;
        line_tbl.DELETE;
        dbms_output.put_line( 'Successfully updated emp temp table.');
      EXCEPTION
      WHEN OTHERS THEN
        ROLLBACK;
        dbms_output.put_line( 'Error while updating line temp table. ' || sqlerrm );
        FOR j IN 1 .. sql%BULK_EXCEPTIONS.COUNT
        LOOP
          DBMS_OUTPUT.put_line(' occurred during line temp table updation ' || sql%BULK_EXCEPTIONS(i).ERROR_INDEX );
        END LOOP;
        raise e_validation;
      END;
    END LOOP; -- j
    --CLOSE c2;
    IF hdr_tbl(i).err_msg IS NULL THEN
      hdr_tbl (i).status := 'VALID';
      hdr_tbl (i).err_msg := NULL;
    END IF;
    -- even if I have line validation failed I have to update header status and erorr msg
    BEGIN
      FORALL i IN hdr_tbl.FIRST .. hdr_tbl.LAST
      SAVE EXCEPTIONS
      UPDATE DEPT
      SET object_id =4,
        status      = hdr_tbl (i).status,
        err_msg     = hdr_tbl (i).err_msg
        -- batch_id =
        -- I have multiple columns to update based on validations
      WHERE deptno = hdr_tbl (i).deptno
      AND status IS NULL; ------------
      COMMIT;
      hdr_tbl.DELETE;
      dbms_output.put_line( 'Successfully updated dept temp table.');
      --close c1;
    EXCEPTION
    WHEN OTHERS THEN
      ROLLBACK;
      dbms_output.put_line( 'Error while updating hdr temp table. ' || sqlerrm );
      FOR i IN 1 .. sql%BULK_EXCEPTIONS.COUNT
      LOOP
        DBMS_OUTPUT.put_line(' occurred during line temp table updation ' || sql%BULK_EXCEPTIONS(i).ERROR_INDEX );
      END LOOP;
      raise e_validation;
    END;
END LOOP; --i
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('EXCEPTION AT validate'||SQLERRM);
END ;
PROCEDURE main
IS
CURSOR dept_ins_cur
IS
    SELECT * FROM dept WHERE status='VALID';
CURSOR emp_ins_cur(p_deptno NUMBER)
IS
    SELECT * FROM emp WHERE deptno= p_deptno;
BEGIN
validate_prc;
OPEN dept_ins_cur;
LOOP
FETCH dept_ins_cur BULK COLLECT INTO hdr_ins_tbl limit 1000
EXIT
WHEN dept_ins_cur%NOTFOUND;
END LOOP;
CLOSE dept_ins_cur;
--------- Loading data into the inv line table type -------------------------------
FOR i IN 1 .. hdr_tbl.count
loop
dept_ins(hdr_ins_tbl(i).deptno ,
hdr_ins_tbl(i).DNAME ,
hdr_ins_tbl(i).LOC , emp_seq.nextval);
commit;
OPEN emp_ins_cur(hdr_ins_tbl(i).deptno);
LOOP
FETCH emp_ins_cur BULK COLLECT INTO line_ins_tbl;
--EXIT WHEN emp_ins_cur%NOTFOUND;
END LOOP;
CLOSE emp_ins_cur;
for j in 1..line_ins_tbl.count loop
emp_ins(line_ins_tbl(j).EMPNO ,
line_ins_tbl(j).ENAME ,
line_ins_tbl(j).JOB ,
line_ins_tbl(j).MGR ,
line_ins_tbl(j).HIREDATE ,
line_ins_tbl(j).SAL ,
line_ins_tbl(j).comm ,
line_ins_tbl(j).DEPTNO );
end loop;
end loop;
commit;
BEGIN
forall i IN hdr_ins_tbl.first .. hdr_ins_tbl.last
SAVE exceptions
UPDATE dept
SET status   = 'INSERTED',
err_msg = null
WHERE deptno=hdr_ins_tbl (i).deptno
AND status   = 'VALID';
COMMIT;
hdr_ins_tbl.delete;
dbms_output.put_line( 'inserting into temp tables.');
EXCEPTION
WHEN OTHERS THEN
rollback;
end;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('exception in main' ||SQLERRM);
END ;
END;
Thanks in advance...
Message was edited by: 888025

Hi, I have problem with the following pl/sql block
Well, as Hoek already said, that is the understatement of the century.
I can't be absolutely certain but I think that set of DDL and code that you posted has just about every possible error and design issue that there is! It would make an excellent addition to BluShadow's FAQs an an example of what NOT to do.
I don't think it is even possible to 'fix the basics first' as Hoek suggested. IMHO the first step needs to be to create a functional requirements document (FRD) that explains in detail WHAT needs to be done. That doc should also contain info about how any errors/recovery/restart is to be handled. It is premature to try to implement ANY solution without first knowing what is needed functionally.
Once the FRD is done you should do a walk-through based on your current architecture and sample data to make sure that the document really covers ALL of the steps that need to be performed and that it adequately explains how to deal with any processing or data issues that might arise.
The next document you need is the TRD - Technical Requirements Doc that covers the different technical implementions of the FRD that can be done and the advantages/disadvantages of each.
Then you can start working on a prototype.
1. The DDL you posted isn't coherent - there are CREATE table statements and then later ALTER statements that add additional columns. There doesn't appear to be any reason for not including ALL of the columns in the CREATE table statement.
2. You are using PL/SQL types instead of SQL types. That makes it impossible to use those types in SQL statements and makes it much more difficult to test since it is much easier to test a query in SQL (e.g. using sql*plus) that to embed the query in PL/SQL.
3. You are defining the same type twice but giving it different names.
TYPE dept_t
   IS
      TABLE OF dept%ROWTYPE
         INDEX BY binary_integer;
TYPE dept_i_t
   IS
      TABLE OF dept%ROWTYPE
         INDEX BY binary_integer;
Those are both based on the same DEPT table! Why the duplication?
Also you are using associative arrays instead of just using nested tables. Get rid of the INDEX BY clause.
4. You have some serious architectural and data model issues
-- Assume the following scenario, we are validating dept (master) and emp(child) which are my temporary tables and updating the status back to
-- dept ( for all the validation errors, even if we have any validation at child it has to update the header record with error message),
Why would you do that? You say 'it has to update the header record ...'. Says who? That is just one indication that you are trying to implement a 'solution' before you have adequately defined the 'problem'.
Typically you would NOT alter any of the data tables; any validation errors/issues would get inserted into a table specifically designed to hold/log those issues. That table would contain key field values to correlate with the source of the error.
Those 'master' and 'child' entities are two SEPARATE things. Issues with a 'master' row have NOTHING to do with any possible child rows.
And issues with a 'child' row have NOTHING to do with any possible master rows. The ONLY connection between 'child' and 'master' is the foreign key that correlates them.
So you don't necessarily have to validate the 'child' rows in sync with their 'master' row. In many cases you would have a procedure that performs validation of the entire set of 'master' rows and log those issues/problems. You would use a different procedure to validate the entire set of 'child' rows and log their issues.
Those validation procedures can often work with ALL of the data using SQL statements instead of bulk processing.
5. You are using loop constructs that are not valid for the type of processing you are using
LOOP
    FETCH c1 BULK COLLECT INTO hdr_tbl;
    EXIT
WHEN c1%NOTFOUND;
END LOOP;
There can be NO exit since the bulk collect with either get EVERYTHING or NOTHING. Possibly that is just a holdover from your attempt to use the LIMIT clause but you removed that clause from the FETCH; I don't know.
There is so much wrong with what you posted it is really rather pointless to try to 'fix' it.
I suggest you start over and clarify and DOCUMENT the actual requirements without prejudice about the solution that someone seems to want to force on you.

Can any one please tell me how I can print off my iPad air from my hp printer????

Can any please tell me how I can print from my iPad air to my hp printer??????

Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint

Any one please tell me what is factory calendar ID .

hi abapers ,
this is the reqirment i am creating factory calendar using fm DATE_CONVERT_TO_FACTORYDATE . but in export parameters it was asking factory_calendar_id ? . please tell me any one
Regards
venkat.

Hi,
The factory calender id 's will be stored in TFACD table.
but you need to ask your fuctional consultant regarding the value of that ID.
Regards,
Venkatesh

Can some one please tell me what leads i need to connect my mac book pro to my tv

Hi i have a mac book pro can someone tell me what leads i need to connect it to my tv
thanks scott

If your TV has HDMI, and if your MBP is compatible with this adapter, I highly recommend:
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
It sends the audio out through the mini DisplayPort into the HDMI cable, but only if your computer has that capability. On that page, scroll down and look for a comment titled "How you know if it is supported w/o guessing."

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

Can any one pls tell me the procedure of crm datasourse data extraction r/3

hi
pls can any one pls tell me the procedure of crm datasourse data extraction from r/3
regards
subbu

Subbu,
First off please don't post the same question twice. I have locked your other question due to it being a duplicate.
Second off: don't expect an answer to your question immediately.
Third off: You need to read the rules of engagement before posting any more questions here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Fourth: You question is way too vague and honestly if you would have done a search or read some introductory material on CRM, you would have learnt that the CRM middleware handles the data transfer.
Last: I'm locking this thread because your question is way too vague, please take a look at the CRM wiki and help.sap.com and read all the associated documentation about CRM on those sites.
CRM wiki
https://www.sdn.sap.com/irj/scn/wiki?path=/display/crm/home
Then you can come back here if you have a detailed question after reading those materials.
Take care,
Stephen
CRM Forum Moderator

In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone?

Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST

hi all ,
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
what all data i need to give to post a document.
Thanks and Regards
JK

Hi...
part of my source code:
** Header Data " Sending comp code
wa_documentheader-comp_code = 'XXXXX'.
wa_documentheader-doc_date = '20060620'.
wa_documentheader-pstng_date = '20060620'.
wa_documentheader-doc_type = 'XX'.
wa_documentheader-username = sy-uname.
wa_documentheader-ref_doc_no = 'XXxxxxxx'.
wa_documentheader-header_txt = 'Text Header.
wa_documentheader-bus_act = 'XXXX'.
*it_currencyamount
wa_currencyamount-itemno_acc = '1'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = 1943.
APPEND wa_currencyamount TO it_currencyamount.
*it_accountpayable
wa_accountpayable-itemno_acc = '1'.
wa_accountpayable-gl_account = '1234567890'.
wa_accountpayable-bus_area = 'DIV'.
wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
wa_accountpayable-pmnt_block = ''.
APPEND wa_accountpayable TO it_accountpayable.
*it_accountgl
wa_accountgl-itemno_acc = '2'.
wa_accountgl-gl_account = '1234567890'.
wa_accountgl-item_text = 'Text 2 XXxxxxx'.
wa_accountgl-bus_area = 'DIV'.
APPEND wa_accountgl TO it_accountgl.
wa_currencyamount-itemno_acc = '2'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = ( 1943 ) * -1.
APPEND wa_currencyamount TO it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
EXPORTING
    documentheader = wa_documentheader
TABLES
    accountgl      = it_accountgl
    accountpayable = it_accountpayable
    currencyamount = it_currencyamount
    return         = it_return.
clear it_return.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
      EXPORTING
        documentheader = wa_documentheader
      TABLES
        return         = it_return
        currencyamount = it_currencyamount "currencyamount
        accountpayable = it_accountpayable "accountpayable
        accountgl      = it_accountgl "accountgl
      EXCEPTIONS
        OTHERS         = 01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

The camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

Similar Messages

Maybe you are looking for