The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees.

Similar Messages

  • My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?

    My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?

    Try cleaning out the phone's port, of pocket fluff and such. Carefully. And check the mains adapter similarly, but less likely.

  • I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    Try leaving it plugged in and then restart the computer.
    If you are on Windows this link may help but it is a bit old.
    http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

  • How do i get my apple ID from my old iphone 5 to my new iphone 6 ? what are the steps? because last time i tried getting my apple ID from my old to new phone it all went wrong and i could not sign in or use imessage? thanks

    How do i get my apple ID to work from my old iphone 5 to my new iphone 6? what are the steps? as last time i tried this everything went wrong my imessage would not work and it would not let me sign in?

    Try TransPhone, it's working fine, but a bit expensive...
    After installing this, you'll Be able to send/recieve music, contacts, text messages, photos and Videos over bluetooth. Works fine with all mobile phones and computers...
    I may receive some form of compensation, financial or otherwise, from my recommendation or link
    <Edited by Host>

  • How to install owa in iphone 4s? what are the detailed procedures to proceed?

    How to install owa in iphone 4s? what are the detailed procedures to proceed? Can you help on this? Thanks

    You don't need to install OWA on your iPhone. It needs to be enabled by your email provider - presumably your employer? They should also be able to provide you with detailed instructions on how to access your email remotely using your iPhone.

  • HT201441 I restored my iPhone 5 to a back up on my brothers iMac ..now I have access to the phone but can't turn off the find my phone with the owner of the account I backed my phone to .. What can I do to solve this issue??

    I restored my iPhone 5 to a back up on my brothers iMac ..now I have access to the phone but can't turn off the find my phone with the owner of the account I backed my phone to .. What can I do to solve this issue??

    You sould be able to sync both ways.  Check your default calendar on your phone by going to Settings>Mail,Contacts,Calendars>scroll down to the calendars section to Default Calendar.  Check to be sure you have selected your mac calendar as your default (and not, for example, On My iPhone).  Then enter a new event on your phone and sync to confirm that it appears on your mac.

  • Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space.

    Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space. Can someone please help?

    To add to Nick's comments, "Other" is typically approximately 1 gigabyte.  Occasionally for some users, it gets much (many times) bigger because they have some corrupt files.  If that's the case, it's best to restore the iPhone.
    Plug the iPhone into (current) iTunes, let it sync, then choose "Restore" on the right.  If restoring from the iPhone backup does not help, then restore (again) as new and then manaully sync the iPhone.

  • I have IPAD 1 and I would like to sharing the screen to monitor TV (video,photo,app). What are the options?

    I have IPAD 1 and I would like to sharing the screen to monitor TV (video,photo,app). What are the options?

    Unfortunately you do not have any options, the iPad one cannot be used for mirroring.

  • The web developer toolbar wont load on my computer, what are the possible solutions?

    when i click to download the toolbar now, firefox refreshes as it should be nothing happens.
    maybe i dont see the toolbar? i cant find it.
    what are the possible reasons its not downloading and what can i do?

    Hey lydiabat10,
    Thanks for using Apple Support Communities.
    Looks like the iPhone won't allow explicit content on it. One thing you may want to look at is the Restrictions.
    iOS: Understanding Restrictions (parental controls)
    http://support.apple.com/kb/HT4213
    Have a nice day,
    Mario

  • IPhone 5 Replacement, what are the conditions?, how is my condition?

    Hey guys, i just recently bought an used iPhone 5. the phone has guarantee until 2nd Feb 2014
    So, here's my problem
    on the first day of my new phone, suddenly the microphone for FaceTime, Video recording, and telephone is not working
    i've asked the guy on apple store, he said that they can fix it for 10 minutes, or they can replace it with a new one (which is very very nice).
    so then i made a schedule for Genius Bar on next monday 16th Des.
    What do you think guys?, will i get a replacement?
    thank you so much for your opinion/answers

    TimothyJohnJ wrote:
    so, it depends on me whether i want to replace it with a new refurbished one or stay with the old phone?
    Correct.
    TimothyJohnJ wrote:
    the thing is, mine is now a bit messed up, on the top right corner, the guy who sold this phone had dropped it, so its a bit bent and cracked now. will they able to replace it? thank you
    In that case, it may be better to get a refurbished phone. Note that the Apple Retail Store may charge you for it, but if not, much better

  • The audio port on my Imac is not working,what can i do to fix this?

    When i tried to plug in my new Bose speaker in the audio port of my Imac, it is not working, i also tried regular headphones, and it is not working either, is there anything i can do to fix this?

    1. Reset PRAM.  http://support.apple.com/kb/PH14222
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the  appropriate method.

  • Carrier update "ATT 14.2" on iPhone 4S. What are the details?

    Recently my AT&T iPhone 4S received a carrier update to version "AT&T 14.1".  [You can see what your version is when you click on SETTINGS, then GENERAL, then click ABOUT...scroll down and look for "Carrier".]  Version 14.1 brought the amber, weather and goverment alerts.  See link: http://blogs.att.net/consumerblog/story/a7790136
    But today, when my phone was connected to iTunes, it said I have a carrier update and asked me if I wanted to update and install.  I did that.  But I did not understand what the details were.  When I clicked on "Learn more"...I was brought to a link that did not help me.  Link: http://support.apple.com/kb/HT1970
    When I contacted AT&T, they told me to contact Apple.  When I called Apple, they told me to contact AT&T.  Then they did not know what I was talking about.
    Anyone know details about the update?  Thanks in advance!
    I have the latest iOS for iPhone 4S (version 6.1.3) and I am using the latest version of iTunes for my MacBook Pro (11.0.4 (4)). 

    So they doing the ye'old monkey in the middle routine, eh? Well I'm not a monkey and neither is anyone else(!)
    AT&amp;T is saying they aren't doing it, and that if my phone decides to crap out that I will have to see if Apple will replace my phone. But she said even though they have no involvement nor allowance with this carrier version update, that it is between apple and the federal agency requesting these updates, that she will document and send the complaint to the people at AT&amp;T that are working on carriers updates with them.
    I also stated to the rep, that there is some chatter stating the updates are being implemented by AT&amp;T. The rep denied any such information.
    I also asked the rep, if there has been any customer complaints or concerns brought to AT&amp;Ts attention today in regards to Carrier Version Updates? The reps response was "no, this is a first"
    What I am experiencing: LTE or WiFi: these OTA Forced updates are unexpected and with out advanced notice.
    This is the second time I've witnessed this while the device is in use that this OTAFU comes through. There is a data cap on bandwidth, so I think the OTAFU is hogging bandwidth and other resources, which in turn is making any other apps in use choke for bandwidth and other resources while the update is taking place.
    I still have the Government Alerts with the 14.2 CU.
    I do believe this is IOL and Data Redundancy which is causing technical debt to grow exponentially out of control.
    Amber Alerts are great, useful, and helpful - but there is an App for that, a text message, and an email alert system.
    Emergency Alerts are great, and useful - BUT there are many apps and signals for that as well as being broadcasted on TV, Radio, FiOS, And Cable.
    Simply all too much(!) When is enough enough?
    What is the backup system to the government emergency alerts system, if we are unable to access any form of electronic communications?

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • Am trying to download a plug-in, but am unable to download ANY plugins. I keep getting this: Unexpected installation error Review the Error Console log for more details. -203 What can I do to solve this issue?

    I am not able to download ANY plug-ins. All attempts result in the following:
    Firefox could not install the file at
    https://addons.mozilla.org/en-US/firefox/downloads/latest/10137/addon-10137-latest.xpi?src=addondetail
    because: Unexpected installation error
    Review the Error Console log for more details.
    -203

    Hi slysailr ,
    Please take a look at this article [[Unexpected installation error -203 when installing add-ons ]], it should help you out with your issue.
    Regards,
    Ziggy

  • I have an iphone 4. What are the system requirements for "pages"?

    I have an iPhone 4. Do I have enough storage for "pages"?

    It requires iOS 5.1 or newer > https://itunes.apple.com/us/app/pages/id361309726?mt=8 You can see the Pages size under Pages logo

Maybe you are looking for