The click boxes are not showing up right

The click boxes such as on surveys or any thing is not showing correctly and therefore some sites says the I think intuit is not working. I'm not sure if that is correct as I forgot to write it down.
Thank you for your help.

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
thank you

Similar Messages

  • How to setup a guest network when the dialogue boxes do not show up in AirPort Utility 6.1

    How do I setup a guest network when the dialogue boxes do not show up in AirPort Utility 6.1?
    I see screenshots where there are boxes to 'enable' guest network but these simply do not apear on the Wireless tab in AirPort Utility

    I now have a guest account, thanks to you!
    I did the factory reset and was able to set up the guest account.
    There were 3 problems, all of which I was able to solve.
    The first problem was connect to Ethernet, which I selected by WAN port, as shown in the first screen shot. This page used to read just Ethernet and the Bridge Mode.
    The second problem was whether to share a range of addresses or share a public IP address. I selected share a public IP address as shown in the first screen shot. I had tried the range of IP addresses in my earlier attempts, the ones that failed. Hopefully this will have no effect.
    I have forgotten what the third problem was - only excuse is a few too many flavored drinks. I didn't have any problems solving it though.
    What is really weird is I can log on to Guest and use on my iPad (first generation), my wife's iPod Touch (third generation), and my wife's 2011 MacBook Pro. I can't log onto Guest on my 2008 iMac, even after a restart. I get the image below.
    Since I don't lug my iMac around a lot and it is connected by Ethernet, while my little make it right brain says figure this out, I am not going to worry about it.
    Thank you again for your time and patience in helping me solve this.
    Eric Root

  • Click Box does not show failure caption

    In one of the slides, I have 4 pictures. I put click box over
    each of the pictures, one of them I set success caption, the other
    3 failure caption. When I click the success box, success caption
    shows, but when i click the other box, the failure caption could
    not show.
    Can someone help me?

    Hi EstherH
    I don't believe you can make it work that way. Here is how
    Success/Failure captions work with Click Boxes. Any click on the
    box itself will cause the Success Caption to dsplay (If it has been
    enabled). Any click OUTSIDE the Click Box area will cause the
    Failure Caption to display. (Again, if it has been enabled).
    I'm thinking you can get what you want by thinking backwards
    a bit. For each of the three incorrect Click Box areas, configure
    Success Caption to resemble what you want the Failure to
    read. You may also wish to change the caption style so it's
    different. If you did this, a click on the other Click Box would
    trigger it's Success Caption to display, but it would effectively
    present a Failure to the user.
    Make sense? Hope so... Rick

  • TS4337 I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

    I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

    On the iPad tap Settings > iCloud
    Toggle Documents & Data off then back on then restart your iPad.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    On the iMac open System Preferences > iCloud
    Deselect the box next to Documents & Data then reselect it then restart your iMac.

  • The default wallpapers are not showing up. All I see is a black screen. How do I get back default wallpapers?

    I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?

    Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • I bought the season 7 pass for Doctor Who, but the new episodes are not showing up for download.  Who can I contact to find out why?

    I bought the season 7 pass for Doctore Who, but the new episodes are not showing up for download.  I've been all over the support page, I even looked up my purchase history and there is are none showing and I even bought last weeks episode, The Bell's of St. John.   Who can I contact to find out why I'm not getting the rest of season 7 for download?

    Garmin is sending you to Apple because it is Apple that would have to give you a refund as the actual point of sale.  However, Apple states all sales are final.
    Apple is sending you to Garmin because it is Garmin's fault their maps are out of date and Apple doesn't write the software.  They may not even be looking that deeply and simply perceiving it as a programming "bug" it is up to Garmin to solve.
    Who know whose fault it is that Garmin isn't getting up to date data to put in their maps.
    Ultimately I think you stand the best chance in getting a refund from Apple though it isn't guaranteed.  Apple is the cashier.  You just have to convince them this isn't just a line of code omitted from an application and isn't something that will be soon corrected by Garmin.  Make it clear it isn't a problem with the application running on your device, it is a problem with the data it contains.  Either that or you have to hope Garmin will feel so bad about it they will delve down into their slush fund and send you a refund.

  • Click Boxes are not working

    I'm currently working on a course that contains a main menu screen that then branches off to several course modules.  On the main menu I have placed several click boxes that jump to the slides within the course.  Of the 5 click boxes that I have placed on the main menu, 2 are not working although they are set exactly like the other three with the exception of the slide that they are  jumping to. 
    The click box setting are as follows:
    Jump to slide (set to the slide that contains desired content)
    Appear as of 0 seconds
    remain for rest of slide
    Infinate attempts
    Show hand over hit area
    Pause project until user clicks.
    I have tried to delete the offending click boxes and rebuild.  Copy a click box that functions and simply change the jump to slide number.  Rebuild the entire slide (resulting in the same situation of the 3 click boxes that worked continuing to work and the 2 that didn't, not working.)  I have built several main menu screens in the sam manner in several courses with out any problems.  Please help me to understand what could possibly be the issue.

    Hi there
    Do you have a quiz in the project? If so, you could have your quiz settings configured so that questions MUST be answered before you may continue.
    For example, perhaps you have a 40 slide project. You have some buttons on slide five. Button one jumps to slide six. No problem. Button two jumps to slide 20. No problem. But Button three tries to jump to slide 30. And on slide 28 you are asking a True/False question. Your quiz settings may declare that the question on slide 28 MUST be answered before you may continue. In that case the button would appear to fail and not jump to slide 30 because the question on slide 28 hasn't been answered.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • The lines I create with the pen tool are not showing up in After Effects.

    I'm working on a project where I need straight lines. I've added the lines using the pen tool on solid layers, but they are not showing up before or after rendering. I can see where they are supposed to be when I isolate the layer they are on. I have the lines at one pixel, solid white and the layers are on top of everything else. I took a screen shot. Can anyone help me?

    Well, I am still not 100% sure why the pen tool lines/masks are not showing up but I was able to work around it. I already had the stroke effect applied and set to all masks. Looking into this though, it seemed that they were only not showing up on the new solid layers I had created. I duplicated the layers the masks were  working on instead and it seems to resolve the problem for now. Thanks for your help!

  • Search boxes are not displaying properly on sites (eztv and isohunt for example) the search buttons are there, the imput boxes are not.

    I have been noticing on various sites that search boxes are not being displayed, seems to be happening on torrent sites but it could be more widespread. I have disabled all add ons, running Firefox 4 beta on Windows 7 x64. I have linked some screen captures

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    * [[Troubleshooting extensions and themes]]

  • The page parameters are not showing in the URL .

    I my appliaction all the pages have textboxes with some values . But the URL for none of the page shows the parameters like every page has url :
    but none of the page parameters are being shown . What is the problem here
    please help

    You can setup a page branch that responds to your specific button and within that branch definition you can specify page items and values to be set when that branch fires.
    Is there a specific reason that you want the values passed on the URL? That's not really required to make ApEx function properly.

  • Some of the Artist names are not showing up in iTunes or my iPod

    I have a couple of songs by Yanni on iTunes and my iPod Video (5th Generation). The songs are listed and so are the albums, but the artist name is not. I tried retyping the artist's name but that didn't work.

    See Missing Artist or Album not with others by same artist.

  • The down payments are not showing in the liquidity forecast (FF7A)

    The down payments are recorded in the special ledger "A", I defined the FA level, with the source symbol "PSK" in the transaction OT12, and I also put the level of FA in the account associated with the special ledger " A ", in transactions OBXR and OBYR. Despite having done the above I can not see the down payments in forecasting liquidity of the transactions FF7A or FF7B
    I will be grateful for any help.

    Have you customize the Treasury data for the GL account(s) involved? (TCODE FS00)
    Have you customize the Treasury data for the K/D account(s) invloved? (TCODES XK01, XK02, XD01, XD02 or FK01, FK02, FD01, FD02)
    The configuration of Cash Management has many twists and turns... I would recomend you read the coniguration guide for [Building Block 160 here|]
    Edited by: Julio Gomez Delgado on Dec 18, 2009 2:50 PM

  • TS3212 i tried doing this many times but the run box does not show up. ill click download but it just skips right to thank you for downloading, then i go look and itunes is nkot downloaded. i think i need the 32 bit or whatever but i cant find it.


    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,

Maybe you are looking for

  • Problem with file locked by another user

    I have a problem with a user on Windows 7 in my network when accessing a single .xlsx file. When Jane Smith opens said file, she gets a message that the file is locked by Jane Smith but she has checked and it was in use by another user, Roger Smith.

  • Checks to be escheated

    u2018Statusu2019 of checks after pulled for unclaimed property reporting.  Can we establish an (E)scheated status? Does SAP have any functionality for handling checks that need to be escheated? I know the checks can be voided and then using FB05 the

  • Convert playlist to lower bitrate without creating hundreds of duplicates?

    So here's the issue: I have an 8GB iPhone and nearly 14GB of music to put on it. 14GB is a lot, but most of the tracks are Apple Lossless, so there's only about 770 songs in the playlist. I know on the Shuffle, there's an option to compress a playlis


    Hey! i dont have h.264 as a option on the output format. I got Adobe after effects cs4 full version! Please reply fast!!!

  • Adobe interactive form with 2 Iviews

    Hello I have a adobe interactive form which is filled by an employee and then the HR department should approve it How can I develop it so only the HR department user will see the approve / disapprove button ? should I create 2 iviews? thx Shai