The color red is turned to rust in Photoshop CS 5. It looks fine in Windows. How can I fix this?

Reds turned to rust in CS 5, Reds are accurate in Windows. How can I correct this.

Good day!
Reds turned to rust in CS 5, Reds are accurate in Windows.
The screenshot you provided seems to show Bridge – which is not Photoshop, but an appplication of its own and for which a Forum exists, too.
http://forums.adobe.com/community/bridge/general
Do the images have their Color Profiles embedded?
Regards,
Pfaffenbichler

Similar Messages

  • I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2.  How can I fix this?

    I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2.  How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.

    What computer do you have?  is it 32 or 64 bit operating system?

  • My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help.  If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
    The black dot problem may mean you need to reset your iPod.  If that does not help, it may need service by an Apple Authorized Service Provider.
    If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
      http://www.apple.com/support/ipodtouch/
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • HT1338 i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this  "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

    i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this  "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

    I note this information from Wikipedia: "DVD Studio Pro was a high-end software tool published by Apple Inc. to allow users to create DVD masters to be sent out for replication at production houses. Its tight integration with other Apple applications allows users to take Final Cut Pro and Motion projects and render them into the DVD format without encoding to intermediary formats. This streamlines the production workflow and reduces overhead."
    If that is your intent, finding a substitute program that will run on your Mac may not be as efficient.  Others can advise you on alternatives, or you can post a new thread specifically with that question.
    BTW: what Mac and what version of OS X?
    If it is important to you to continue to use DVD Studio Pro, consider the option of installing Snow Leopard (with Rosetta) into Parallels on your Mac:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions are here.

  • HT1386 Trying to sync my music into my iphone 4s but a pop up keeps showing up saying "The iPhone "Brandon's iPhone" cannot be synced. A duplicate file name was specified." How can I fix this?

    Trying to sync music into my iPhone 4s but a pop up keeps showing up saying "The iPhone "Brandon's iPhone" cannot be synced. A duplicate file name was specified." How can I fix this?

    Remove any duplicates in your iTunes Music Library by following the link below:
    How to find and remove duplicate items in your iTunes library
    Then try to sync again.

  • Hello my computer will not load the photoshop program as it has Inefficient disc space how can i fix this please?

    hello my computer will not load the photoshop program as it has Inefficient disc space how can i fix this please?
    Regards
    Geoff

    Hi The Lad,
    If you have "INSUFFICIENT" disk space, then you can try and change the install location while performing the installation of the desired product. I am not sure when the error message would pop up saying that the disk space is "INEFFICIENT". Could you please share a screen shot of the error message along with the system information.
    Cheers,
    Kartikay Sharma

  • When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?

    When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?

    Did you reset your iPad like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.

  • I downloaded the latest I tunes update today. Now when I click on the itunes icon I get an arror box :R6034 and cannot access my itunes library. How can I fix this problem?

    I annot open my Itunes library ever since installing the latest version of Itunes today. I get an error "R6034." How can I fix this problem?

    Hello Steven.
    First and foremost, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    In any case, and since you seem to be in the process of updating (you should have done so a while ago, since Firefox 2.0 has been discontinued years ago, I believe), your problems may exist because you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • HT201335 AirPlay mirroring turns on initially and then keeps turning off and will not stay on?  What is wrong?  How can I fix this?

    When I AirPlay - mirror my iPad to the apple tv, it initially turns on, but then kicks off my iPad over and over again and will not connect or stay connected.  What is going on?   How can I fix it's issue?  Sometimes it AirPlay/mirrors fine, and other times it does not like to connect at all.  What can I do? 

    Intermittent issues are often a result of interference. Check www.istumbler.net (netstumbler for windows). Refer to router manual on how to change channels, make sure it's up to date.

  • Using webmail in Mozilla Firefox 17.0.1 on Windows 8, original messages get turned into html code when I reply to or forward them. How can I fix this?

    I have tried re-setting Firefox and working in Safe Mode, but the problem still recurs. I use Fastmail as my webmail server and never had this problem on Windows XP or Windows 7. When I reply to a message, the original message is turned into html code. The same happens when I forward a message.
    My JavaScript is up to date, in case that's relevant. The Fastmail support team suggested the problem would be Firefox-related.
    The other function of my Fastmail account that isn't working properly in Firefox 17.0.1. is the search function.
    Do I need to get new plugins or something? I don't know where the HTML editor is in Firefox or if that's what's wrong.
    Regards,
    Rachel

    Thanks for your reply, cor-el. Norton 360 came pre-installed on the laptop as part of the package I bought. I haven't changed the pre-set firewall or anti-virus settings. Should I change something?
    I will try rebooting in Windows Safe mode as you say and report if that makes any difference.
    Rachel

  • Every time i try to logg on to my apple iD i get the message that tells me who says: "Your sessieon has timed out. Try again. " How can I fix this?

    I get the message" Your time has timed out" when i try to log on my apple id. Can you please help me?

    I get the message" Your time has timed out" when i try to log on my apple id. Can you please help me?

  • FireFox crashed and when I opened it the only way to get my tabs back was to restore them in a new window,how do I fix this?

    This Isn't the first time this has happened to me.
    The tabs have to be restored in a new window Instead of the main one
    witch just displays my home page.I have to restore my tabs in a new window every time I open Firefox and the only way I have found to fix this is to open all my tabs one by one in the main window.
    I just want an easier way to transfer my tabs so they open every time I
    open Firefox.Is there a way to do this other than the method I mentioned because its annoying to have to open all my tabs one by one every time this hapens

    Hi Steeloid
    click on the Firefox button (or Tools menu) > Options > General panel > Startup > Show my windows and tabs from last time .
    see for more info : https://support.mozilla.org/en-US/kb/startup-home-page-download-settings#w_startup
    see also: [https://support.mozilla.org/en-US/kb/restore-previous-session Restore previous session - Configure when Firefox shows your most recent tabs and windows]
    thank you

  • HT3258 The scanner on my Canon inkjet printer MG6200 series will not work with Mountain Lion. How can I fix this?

    The MP Navigator software in my scanner cannot be opened since I installed Mountain Lion. Canon say they don't have a way of fixing this, so is there a solution out there I wonder?

    I have the MG6250 and MP Navigator v5.0.2 is working on my 10.8.2 Mac, so I don't know why the Canon support is telling you that it cannot be fixed.
    To use MP Navigator you must have the full scanner driver installed. And when it is installed you then need to configure MP Navigator to use the networked MG62xx.
    Also ensure you are using the latest version of MP Navigator. Try trashing the one you currently have in Applications > Canon Utilities and then installing this latest version.

  • ICloud and iTunes, cannot get the check boxes to stay checked under  preferences for iTunes to keep automatic downloads for iCloud, how can I fix this?

    When using my iPhone and Macbook with iTunes, I cannot get the checkboxes to stay checked in iTunes to use the automatic downloads for iCloud.  It is so frustrating. I check box them and hit ok under store preferences for iTunes, and when I go back in, they are unchecked. I am so excited to use iCloud with my iPhone downloads and it is not working, if I can't get it to work with this, I am never going to get it to work for documents.  Please help.

    Hey man. Did you ever get a solution to this problem? I spent an hour on the phone with AppleCare yesterday, and am going to have to call them back when I get home from work today. It's driving me bonkers!!

  • I'm stuck at the set up as new iPhone or from back up screen after updating to iOS8. How can I fix this?

    It's updated but I can't get rid of the set up as new phone or from a previous back up screen.

    Are you using the same Apple ID and password that has been used to set up the phone for the very first time?
    iCloud: Find My iPhone Activation Lock in iOS 7
    If yes, did you try to connect in recovery mode to set it up?
    If you can't update or restore your iOS device

Maybe you are looking for

  • Deploying Shared Varaiables in Executable

    I am running two executables. One is running on a tpc-2106 Touch Panel Monitor using the Labview PDA Module. The other is being deployed on a FP-2010 controller. They are communicating over ethernet using network published shared variables. The FP-20

  • 8I 681 Error While Creating Excise Invoice

    Dear All,             Am getting error 8I 681 error while creating excise invoice,when i analysed since in the document flow the delivery document is not there, only J delivery will be allowed in creating excise invoice. Our client wants item level m

  • Problem Accessing Application if deployADF application to standaloneOC4J

    I just tried to do the OBE Jdeveloper sample Deploying J2EE and ADF Applications Everything worked fine with deploying to a stand alone OC4J including the last point to deploy ADF view controller project from a WAR file.according to Jdeveloper log Us

  • Java doesn't work right

    I prefer Mozilla over Internet Explorer. But Java works on Explorer. I've read a dozen posts from other people who have this problem. Most of the fixes are complicated or have to be redone often. Just downloaded latest version of Mozilla, and I can't

  • How to upload program from hardisk to a package

    Hello all, Is there any standard program to upload the programs in a package. i have 5 program i want to upload them how can i do it?