The contract condition in the ECC affect the replicated PO from SRM

Dear ,My expert :
   I work in SRM 7.0 SP03,ECS .
In the ESC , the PR is transfered from ECC system and generate one Shopping Cart in SRM syetem.The purchaser carry out sourcing ,and convert the Shopping Cart to PO(according to the contract ) .The PO will be replicated into the ECC system .
   In my scenario ,the contract is created in SRM ,and transferd into the ECC system .
I am confused that the PO will calculate the net price according the contract in the ECC system .eg,Contract in SRM net price 100$   and the discount 10% ,so the PO net price is 90$ .But the replicated PO in ECC net price is 81$.
Is it the grogram error ?
BR!
Alex!
Edited by: Alex on Apr 16, 2010 12:25 PM
Edited by: Alex on Apr 16, 2010 12:55 PM

Hello Alex,
I do not make use of GOA, contract replication, so couldn't tell you from our system. Take a look at the following notes or search for your self service.sap.com/notes. If there is nothing i think you should start thinking of posting a customer message.
Note 1446993 - Contract discount pricing condition applied twice on SHP
1404246 Deleted contract conditions reloaded in PO change version
Note 1332076 - Multiple base price conditions results in error in contract
Note 1357383 - Duplicate conditions appear in PO created from SC
Kind regards,
Tim
Edited by: T. Schuffelen on Apr 20, 2010 9:39 AM

Similar Messages

After updating my iphone3gs and ipod touch 4g to ios 6, the auto lock fuction doesn't work always , especially if passbook is left open in the background! i have also restored both the devices but the problem still persists and is affecting the battery li

After updating my iphone3gs and ipod touch 4g to ios 6, the auto lock fuction doesn't work always , especially if passbook is left open in the background!
i have also restored both the devices but the problem still persists and is affecting the battery life!

Same problem here, after istalling ios 6 on my iphone 4s my auto lock didnt work, but when i closed my assistive touch it worked again..I didnt have this problem in the 5.1.1 version. I dont wanna close the assistive touch tough....annoying problem !!!
Another problem occured in the settings of alarm clock. The sensivity of the on-off button is not as good as in the 5.1.1 version...
Hope they will fix this problem soon !!!
Is there anyone else who hava the same problems??
Best regards...

Command authorization failed - 'AAA API' detected the 'fatal' condition 'No method could process the authorisation request' % Incomplete command.

we are using CISCO ASR 9006 . and we configured aaa authentication and commit changes after that i am able to login ASR with local user but
no any command execute and get error.
Command authorization failed - 'AAA API' detected the 'fatal' condition 'No method could process the authorisation request'
% Incomplete command.
please help.

Hi Anop
How did you get over this problem? I am having the same issue.
Regards
Rohan

Replicating vendors from SRM to ECC

Hi All,
We are implementing SRM 7.0 EHP1 and we have a SRM-SUS scenario.
We have a requirement where we want to replicate the vendors from SRM to ECC.
I know that there are standard programs and interfaces for replicating vendors from ECC to SRM, but are there any standard programs XI/PI interfaces that are available for replicating vendores from SRM to ECC?
Please share your thoughts....
Thanks in advance!

Hi Jack,
Unfortunately I don't have a config guide for it. Can you speak to your XI/PI consultant and just ask him to configure this scenario in XI/PI.
PS: Before this you should import all SRM related business content in your PI system.
Regards,
Nikhil

Error in BDOC while uploading the pricing condition record to ECC from CRM

Hi all,
I have created a condition record for ECC pricing condition type (I have maintained all settings required for maintaining ECC condition type in CRM 7.0) in CRM 7.0. But theis condition record is not uploaded to ECC. I have checked BDOC, it is showing with error status for BDOC type "CND_M_SUP". The errors are as below.
1. sBDoc CNBCCPSAP005 does not contain structure CDBD_CONDREF
Message no. CND_MAST064
2. sBDoc CNBCCPSAP005 does not contain structure CDBD_CONDREF
Message no. CND_MAST064
3. Service that caused the error: CND_MAST_INT_DEEP_MB_TO_SBDOC
Message no. SMO8047Diagnosis
A service caused/ reported an error.
Can some one help me in fixing this issue please.
Thanks in advance,
JM
Edited by: JM on Sep 7, 2010 4:46 PM

Hi,
sBDOCs are not used in ECC to CRM or CRM to ECC data replication scenario. You can either ignore the error or disable mobile bridge.
Regards
Prasenjit

Could u please answer my question for filling the setup tables in SAP ECC purchasing the following error encountered..

Enter rate / USD rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction

Hi karim,
While posting thread here, please use proper headline instead of general sentence.
Issue: seems like some exchange rates issue at ecc side.
Seek your FI or functional team to maintain proper USD exchange rates/rate type For M.
Later you can try to fill set up tables.
Once FI team done exchange rates at ecc side, do transfer global setting to bw side.
Thanks

Print the quotation conditions in a form (like the cost sheet)

dear all
i want to print the pricing conditions of a quotation in a form .... is there any standard ??
if not ..could any one help me ?
thanks in advace

If you are talking about the quotation output form, then yes you can do it and you need to work with your ABAP person to incorporate this code in the print program / smart form. He/ She should be able to do it.
Regards
Sai

Need to accept the general conditions, but don't see the 'accept' button

Hello, I am trying to download an application and I receive a message indicating that the iTunes general conditions have changed. Once I access the general conditions, I am suppose to see a 'accept' button, but don't find it. Can you please assist? thank you

MacBook Pro, Mac OS X (10.6.8)
Eric....
Install the Mac OS X 10.6.8 Update Combo v1.1
That will reinstall the App Store for you and may help the "conditions" dialog.
Restart your Mac after the combo is installed, try the App Store.
It's ok to do this even though you are already running v10.6.8.
If that doesn't help, try this...
Quit the App Store.
Launch iTunes.
From the iTunes menu bar click iTunes > Preferences then select the Advanced tab.
Click: Reset warnings and Reset cache
Click OK.
Quit iTunes. Launch the App Store, try again.

How can I change the order of thumbnails so it affects the order in the lightbox when using the composition widget - lightbox display?

Hi, I'm making my portfolio in Muse, and I'm using the composition widget - lightbox display. I imported all the images and then I wanted to reorganize the thumbnails - and when I do that, the order in the lightbox doesn't change and so it's not the same as the order of the thumbnails (after rearranging them). Please let me know if there is a way to fix this quickly, or do I have to do it all one more time

The order the items display in a composition widget is the front to back order of the items. You can rearrange the stacking order of the thumbnails/triggers using the Layers panel and/or the Object > Bring To Front, Send To Back, etc. menu items to adjust the order they're displayed during auto play or when clicking the next/previous buttons.

TS1559 Are there any REAL solutions to address the iOS 7.x software issues affecting the iPhone 4S?

Has Apple SERIOUSLY addressed this yet?
Something beyond simply resetting our phone and helping for the best.

I had the same problem with my iphone 4S, ios 7.1.2. The wifi button was grayed out for some time now. I tried several methods that I found in various forums, including the reset of network settings, airplane mode, fridge and more. NOTHING!
Then I finally did what I wanted to avoid - the heating method, and it worked as follows:
1. iPhone turned on, I held a hair dryer close to it while keeping the screen on and watching it while heating the iphone with the hair dryer.
2. When the temperature warning came up on the screen, I put the iphone aside to cool up in room temperature (shut off the display). I turned it on/off couple of times until I saw that the warning was gone and normal screen came back.
3. The wifi was still grayed out.
4. I then did the network settings reset,
iphone wifi was back to normal!!

How Product category contract replicate from SRM to ECC?

HI, dear experts:
     I work with SRM 7.0.   I have reliazed that contract with product ID replicated to ECC , it is a standar way.   But the contract without Product ID ,only product category and description    cann't be replicated to ECC.    why?   how I do ?
    Please tell me ,thanks very much.
Jesse.

Hi, Muthu
I made e some change in ECC . and the error info is "Combination item category W /account assignment category U not defined" in BD87 .
     item category 'W' is material group in ECC.
how will i do ?
   thank you
Hi, Muthu
     I made the setting in ECC to permit 'Combination item category W /account assignment category U', and the contract can reach the ECC.    in ECC, the contract item category is 'W' (material group).      actually, in ECC ,material group contract can be created wihtout 'W'.    the MM consultant also don't except 'W' as item category, should as empty.   Will I do some change in SRM . how to do ?
thank you again
Hi, Muthu
     By testing, I found the situation:
    when creating contract, in item, if I select Item Category as 'Product Category' , then I can't input 'Product ID' ,'Unit', 'Price', etc.   I can only input main info such as 'Target Quantity' 'Target Value' etc.
     when the contract is generated in ECC.     the item category is 'W' , Target Quantity is empty, Price is empty, the Target value that is input in SRM    is disapeared,   in other words, this kind of contract don't have price (value) .
      is it normal?
      my business expect it is like with product ID. can this be realized?
detail 'W' can be known from url:
http://help.sap.com/saphelp_46c/helpdata/en/75/ee0f4055c811d189900000e8322d00/content.htm
Jesse
Edited by: Jianxin Lei on Jun 28, 2010 11:10 AM
Edited by: Jianxin Lei on Jun 28, 2010 1:45 PM

The Po condition transfered from SRM to ECC

Dear ,My Experts :
   I work in SRM7.0 .Extended Classic Scenario .
   I create PO with PO condirtion in SRM system .The PO will be transfered to ECC system . But the condition is not transfered .
   So ,i want to know why ,and how to do ?
   Best Regards!
   Alex!

Hello,
As the price determination has already done by IPC for the leading SRM PO, in standard when a PO is transfered to the backend, only the netprice is passed to backend and no further price calculation will be done at the backend. The backend PO takes what ever price SRM sends and creates the PO at the backend with a base condition type PBXX. To intimate the backend not to perform any further price calculations, SRM transfers PO_PRICE = 2. So that backend reads this value and takes only the SRM PO price and no pricing conditions are passed to the backend PO.
This is the standard design of extended classic scenario.
There are not consulting notes for transfering pricing conditions to the backend in ECS. If you want to use the backend conditions you have to implement the BADI BBP_ECS_PO_OUT_BADI to override the value of PO_PRICE = 2.
I hope this helps.
Kind regards,
Ricardo

The change of SC will affect the Contract ?

HI, Expert :
I work in SRM 7.0 ,ECS
I create one Shopping Cart with 2 Material item , and then create the FRx according this SC .In the new FRx ,I add one Service item ,and publish it .
In the end ,I get 2 contracts according the RFx, one with the material ,one with the Service .Why the all items are not in the same contract ? How can I create the one contract with all the items?
BR!
Alex!

Note 1343664 - Contract gets split when created from Quote
RFx is created out of a shopping cart. A new item is added into the RFX and a quote is created for the RFx. From the quote the purchaser tries to create a Contract as a follow on document. The contract then splits into two with the item newly added in one and rest of the items in another.
THIS SAP NOTE COULD BE DESIGNED FOR YOU ONLY.
PLZ TEST AND TELL ME the same
1. sc with material RFX
2. add another material item in the existing RFX
3. create a contract
4. how many contracts created .. good luck
Note 1386301 - Contract gets split when created from Quote
RFx is created out of a shopping cart. A new item is added into the RFX and a quote is created for the RFx. From the quote the purchaser tries to create a Contract as a follow on document. The contract then splits into two with the item newly added in one and rest of the items in another.
check both notes...alex..
Muhtu

How to Maintain the Pricing Condition Records in CRM

Hi
I am new to the CRM
How to maintain the pricing condition records in crm for the particular condition type?
as we do in SD(VK11)
Thanks

Hi Binu,
First of all, you could maintain pricing conditions in the following places:
1. In General Condition Maintenance (GCM)
2. At the product maintenance level
3. At the 'Price agreement' tab of Contracts
4. As manual conditions during order processing at item level
Now, if you want to maintain conditions using GCM, you first have to maintain a condition maintenance group in the customizing where in you can assign condition table and condition type for different counter values. I am assuming that you have done this activity successfully.
When you run the transaction '/SAPCND/GCM', for application 'CRM', your condition maintenance group name and context 'GCM', you will be initially taken to a screen where in you'll have an item area which would be blank and then condition fields would be displayed in a tree on the left.
Here, select the field 'Condition type' and click on icon 'Select records'. You would get a dialog prompting you to enter condition type. Here you can specifiy the condition type for which you want to maintain/view condition records.
If no condition records are available, item area would be left blank. Here, you can choose a condition type using the standard F4 help. Depending on condition types that are assigned to condition maintenance group, different condition types would be displayed in the F4-help using which you can maintain condition records.
Hope this helps.
Regards,
Pavithra
**PS: Please reward points if this helps.

Pricing condition is not displayed in the Condition tab

Hi all,
I replicted pricing condition from CRM to ECC along with Pricing procedure. I see that condition and pricing procedure in CRM system. When I create an order and go to Item condition tab then I don't see my replicated condition there (I expect it to be in the list). And pricing analysis shows for that condition that "Condition with external datasource has not been found". One guess is that I didn't follow the procedure of displaying condition types in product conditions after replication, i.e. didn't create appropriate maintenance group.
Advise please
Regards

Hi Alex,
I get the same error message "Condition with external datasource has not been found" like you.
The field "INVENT_LOC" is filled properly.
Did you do anything else to set up the VPRS condition? Any exchange with the ERP that must be configured?
Is there any documentation how to set up this condition?
Thanks in advance.
Best Regards,
Ingo

The contract condition in the ECC affect the replicated PO from SRM

Similar Messages

Maybe you are looking for