The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

Similar Messages

Overhead is not getting updated in the production order

Hi all,
I am running actual overhead calculation with KGI2.
But the overheads are not getting updated in the order.
Order contains relevant overhead key also.
What could be the possible causes?
SmanS

Arun/ Suleman,
Thank you for your reply.
I have maintained the % in the costing sheet against the 'Overhead rate' but I didn't get the secondary cost element.
Request you to elaborate it further & explain me how to maintain the same.
Also I will be thankful to you, if you could explain me the exact process of loading the overhead on the order i.e. how it loads the overhead form the cost center to order? What happens to the total cost which was lying on the cost center etc, in details.
Mean while I had maintained the required values in costing sheet in KZS2.
Maintained the % against material overhead rate as well as manufacturing overhead rate.
Maintained the credit values for the overhead rate.
Maintained the calculation base values also.
Now while overhead calculation with KGI2, I am getting two errors as follows,
1. S:K5:162 E02 20090831
2. Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND for object
I can not figure out the reason.
SmanS
Edited by: SAP PP Consultant on Aug 10, 2009 6:47 AM

Consumption values not getting updated on the material mastere

HI Gurus,
can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
Thanks
Anushga

Dear ,
Use tcode - OMJJ and then do the following setting -
for movement - 261,262, 201 and 202
Statistically relev. - 2
Consumption posting - R
for movement - 701 and 702
Statistically relev. - 2
Abhinay
Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM

Deliver completed indicator is not getting updated in the PO item Overview

Hi Gurus,
We have the PO with quantity of 10 and it has been GR/IR, but the Delivery completed indicator is not getting updated (Checked).
The deliver completed indicator is selected in the config of t-code OMCD.
Also there is no tolerance limit is maintained.
Could you please suggest us why the indicator is not getting updating.
Thanks & Regards,
Sada

Hi check follwoing
1. Set Delivery complete indicator at plant leve
spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
2. Control field selection for MIGO to disable users from changing it.
spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
and chek this link
["Delivery Completed" Indicator
Regards
Kailas Ugale

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

The iphone could not be updated because the firmware file is not compatible, can i get back to ios 7 as iphone 5s or itsnot possible!!!

My iphone 5s and model A1457 and even after i downloaded the IOS 7.1,2 itunes get me error "the iphone could not be updated because the firmware file is not compatible"
some people saying that u cant get back and other saying yes u can
i wonder if i still can and how to avoid that error
IOS 8 Drain battery like **** -.-" & wireless not working well -.-", that's so annoying ...
(if someone got a solution, i would appreciate it, Thx in advance)

You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing!

Batch Classification data not getting updated during the GR of the PO

Dear Gurus,
While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N reads the information directly from the
reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
Sumit Mohan

Hi Sumit,
I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
Regards,
Bhagat

The iPod could not be updated because the firmware file was corrupt.

So i kept having this problem in this thread here: http://discussions.apple.com/thread.jspa?threadID=1226490&tstart=255
I decided that maybe doing a Restore on my iPod would maybe sort it out however i got that message "The iPod could not be updated because the firmware file was corrupt." when trying to restore. I then searched apple and found out that deleting the 'iPod Software Updates' folder would sort it out, it didn't.
Now what's happening is when i try to restore it comes up saying i have to download this iPod Software 1.2.1 for iPod so it downloads and then when it's finished i'm still getting the error message saying the firmware file is corrupt.
What can i do now? any help appreciated please.

this article actually sorted this problem out for me: http://docs.info.apple.com/article.html?artnum=304996
just to let you know

The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do?

The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do? I just bought my iPhone yesterday and i can't update my software from 5.0 version 9A334) to 5.0.1 because the firmware(1.0.11) is not compatible.

dear friends
im experiencing the same problem rite now. i just bought a 4s for my wife yesterday. when i tried updating the ios to 1.0.5 directly from the phone, it showed - 'Unable to Check for Update. An error occured while checking for a software update. and when i tried updating it via itunes, i got this msg - The iPhone "xxx iphone" could not be updated because the firmware file is not compatible.
my internet connection is perfectly ok here. can anybody help me on this?
Thank you

TS3694 upgrade from 4.3.3 to 5.1.1 b208 gives an error " the iphone could not be updated because the firmware is not compatible"

I recieved an error while trying to update from ios 4.3.3 to 5.1.1 b208 the error:" the iphone could not be updated because the firmware file is not compatible"

This often happens when iTunes is not up to date. Try updating iTunes to the latest version, then try updating your phone again.

HT201210 the iphone could not be updated because the firware is not compatible

Hi
I am trying to update my Iphone software from 4.2.1 to the latest version.
I have tried restoring itunes, and also the update however the same message pops up at the end of installation.
the iphone could not be updated because the firware is not compatible
How can I solve this as it is driving me crazy and is slowly breaking my phone.
If you can help it is much appreciated.
Cheers
Lee Burgess
07411 989 241

Have you previously jailbroke your iPhone or manually downloaded and pointed iTunes to a older or 3rd-party IPSW file?
Try the five suggestions here -> iOS: Resolving update and restore alert messages

Unable to update. Receiving message: The iPhone could not be updated because the firmware is not compatible.

I'm trying to update my iPhone but am receiving this message: The iPhone could not be updated because the firmware is not compatible.

You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing!

Data is not getting updated in DB table

hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side:       ZVendorIdoc
receiver side:
DT_testVendor
Table
    tblVendor
      action       UPDATE_INSERT
      access      1:unbounded
        cVendorName 1
        cVendorCode 1
     fromdate    1
     todate      1
      Key
        cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharma

Hi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep

Mat doc not getting updated in AFRU table

Hi All,
While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are entered at the time of confirmation.
The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
Regards
Ankush

Dear Ankush
please see FAQ note 540392 question 11.
11. Question:
Despite successful goods movements, the material document is not
updated in field AFRU-WABLNR. Where do I find the document number?
Answer:
As of Release 3.1H, the system provides the reference from
confirmation to material document via table AFWI. The system still
only uses AFRU-WABLNR in the case of header confirmations or
confirmations for an individual operation. With milestone
confirmations or with separate goods movements, in other words goods
movements that are posted in the update program or via requests
(BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
always supplied due to technical reasons.
BR Sabine

Not getting updating in a table....

Hi friends,
Currently i working on integration of apex with ebs R12.....And i have successfully integrated following the rod west document....
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends,
Thanks in Advance..
Regards,
Harry...

Goodmorning,
Have you had a look for notes, Depending on the release and industry sollution you can find several notes on this subject (start looking for message RW 022).
Annemarie de Bruijn

The currency is not getting updated in the table VBAP

Similar Messages

Maybe you are looking for