The date and time on my ipod nano 7th gen keeps on changing

Hi,
Since i bought my iPod Nano 7th gen, ive been having problems with the date and time. Every time i change it to the actual time and date, it changes after a while. Does this happen with anyone else? Would there be a problem with my iPod?

Well after i change it it seems fine, but when i use it another time it has been changed.

Similar Messages

  • How do i readjust the right and left speaker in iPod nano 2nd gen.

    How do i readjust the right and left speaker in iPod nano 2nd gen.

    Are you playing a song in iTunes that listed in contents of iPod while it is connected. Try going to your music lib and play a song and disconnect your iPod.
    Also, make sure you are not located in some sub dir that utililizes iTunes.
    You can also hit 'ctrl,alt,delete' to see what applications are running on your PC.

  • Whats the best heart rate transmitter for ipod nano 7th gen?

    Whats the best heart rate transmitter for ipod nano 7th gen:
    Polar WearLink+ Transmitter Nike+
    Polar H7 heart rate sensor
    Wahoo Fitness Blue HR
    Adidas miCoach heart rate monitor

    Calibrate your ipod by charging fully, then using it until it drains then charging it again. And resetting might help too.

  • My ipod nano 6th gen keeps stopping in the middle of a song, My ipod nano 6th gen keeps stopping in the middle of a song

    My ipod nano 6th gen keeps stopping in the middle of a song

    Double check to make sure the headphones are plugged ALL the way in meaning the white part of the headphones is flush with the Nano and no silver from the plug can still be seen.
    The new headphone jacks are a bit tigher than previous generations and require a little bit of extra force to get the headphones to fully connect.
    B-rock

  • Ipod nano 7th gen problems synching

    hello,
    for the past 2 days, I have been battling an ipod nano synching issue. This ipod has been working flawlessly for the past year. And then all of the sudden, without warning, I tried to add additional music and I could not. I cannot remember the exact syntax of the error but it had something to do with the ipod not being recognized and required a restore to factory.
    I have corrected the first issue where the ipod was not recognized and had to be factory restored. Each time I restored, it would not be recognized by itunes.
    I installed itunes on another pc and the same ipod synched and reconnected just fine, pointing back to the itunes install on my primary machine.
    I resolved the first issue on my primary machine by following ht1923.
    However, now the problem I see is that even though the ipod connects successfully , to my primary machine , when I synch and add music, no music shows up on the ipod even though itunes says synch successful. The ipod says "no music".
    ipod serial number: C8NJRFX4F0GV
    my primary pc is an HP Elitebook, running windows 7 professional 64 bit version
    All itunes software completed removed and reinstalled clean.
    Thank you

    I would like to chime in that I've confirmed this as a reproducible bug on my iPod Nano 7th generation. I have an iTunes library with an offending compilation, and to avoid any possible tagging incompatability, I've converted the files to AAC with clean tags containing the album, artist, title, and track number. The album artist is "Various Artists" and I've checked off the "Part of a compilation" box for each track in my library.
    These tracks all show their correct artists when I sync this library to my iPhone. However, when I sync the exact same tracks to my iPod Nano 7th Gen, it choose a random artist from amongst all the artists within the compilation and shows that artist name on *every* track.
    iPod Nano 7th Gen has a bug in the firmware for displaying artists correctly when they are part of a compilation. The OP is likely doing nothing wrong. Apple needs to issue new firmware. Alternatively, I cannot think of any decent workaround short of splitting off each track of the compilation into a separate album, which, would be a huge pain and likely impractical for most people.

  • Playlists will not sync onto iPod nano 7th gen

    Since the very beginning of iPods, I subscribe to a number of podcasts that refresh in iTunes automatically. Once a day I transfer the "recently added" podcasts to a created playlist for my daily listening. This allows me to cull out music downloads from the pure podcast list. Since "podcasts" have been separated as an app, iTunes made it difficult to accomplish this. With iTunes 12 and my current iPod 7th generation, I can find no tip that will allow me to continue the practice. I want a continuously playing playlist of the most recently downloaded subscribed podcasts that can easily be refreshed and transferred to my iPod nano 7th gen at the end of each day.

    There is no Apply button there, until you change something.  Until you make a change to a setting on that screen, the button (where the Apply button is located) says Sync.
    It is somewhat difficult to understand what you are describing.  The Recently Added playlist is a smart playlist.  It comes "pre-installed" with iTunes.  However, if you right-click on it and select Edit Smart Playlist, you will see that the two rules for populating it are
    Date Added - in the last - 2 - weeks
    Genre - is not - Podcast
    Therefore, if that is the playlist you are referring to, it intentionally excludes podcast episodes.  If you want a new smart playlist that lists podcast episodes downloaded in the last two week, you can start with the Recently Added playlist.  Don't modify that playlist.  Right-click on it and select Duplicate.  Name it (the duplicate) something like "Recently Added Podcasts" (or whatever you want).  Right-click on it and select Edit Smart Playlist.  Change the rules so that they are
    Date Added - in the last - 2 - weeks <- You can change the number of weeks as desired.
    Media Kind - is - Podcast
    NOTE:  I suggest using Media Kind instead of Genre, because it more accurately identifies items that are podcasts.  Something can be a "podcast" without Genre set to Podcast.  But everything iTunes shows as a podcast MUST have Media Kind set to Podcast.
    That new smart playlist ONLY shows all podcast episodes downloaded in the last two weeks.  You can then sync that playlist, if you want them all, or use it as the source to manually update your "daily podfest" playlist, and then select that playlist on the iPod's Podcasts screen (as described in my previous reply).

  • Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    . Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My iPod 5thG don't work, it turns off all the time, the date and time is other, and I can't connect to the Wi-Fi

    Please I need help my iPod is not working I have problems for the internet, the date and time is other like if today is March 9,2014  and the time is 9:44 Pm it tells me that is March 11,2014  and the time 3:15 Am! And it turns of all the time!

    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • My iPod Nano Sixth Gen keeps pausing randomly and the screen keeps coming on at random times.  It has only started doing this the last 2 days.  Tried resetting, unplugging headphones

    My iPod Nano 6th Gen keeps pausing.  It does this sometimes immediately.  Sometimes when the screen goes dark.  Sometimes after like 15 minutes.
    The screen keeps going off and on at random too.
    I tried resetting the settings, resetting with the buttons, searching for additional updates, unplugging the headphone and replugging it TIGHT, and new headphones.
    Not only is this annoying, but the power is draining MUCH quicker between the screen coming on and having to turn it on to restart it.

    If a restore of the Nano in iTunes to factory settings does not resolve the issue, it's likely hardware related, meaning you should take or send your iPod in for service.
    B-rock

  • The date and time is not working after setting it to current date and goes back to may,26 2011

    the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

    On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar).  Also make sure your date and time on your computer is correct as well as the Time Zones on both.

  • Can any one advise me if the new ipod nano 7th gen has a sleep timer on it?

    I have just be giving a new style Ipod Nano 7th gen for christmas and wanted to know if it has the facility of playing music and setting up a sleep timer alarm so that it switches itself off after either 30min or 60mins?
    I have had an ipod nano 4th gen for about 4 years and it has this sleep timer facility on it which i absolutely love and use every night.
    So can anyone advise me on this and if it does still have this facility on the newer model that would be great and how i would go about setting it up on my new ipod nano 7th Generation.

    Thank you Chamar for replying to me, i will have a look at printing of the full manual and having a proper read throught it.
    Happy New Year to you all.

  • How can I get rid of the dates and time on my Notes

    How do I get rid of the dates and times on my Notes that appeared when I updated to 8?

    Yes, it's seems like a poor design decision.
    By putting the date on the line below the Note title in the Notes Index, the app shows half the number of notes per page AND if you have a large number of notes, it takes twice as long to stroll down.
    I doubt the designer actually uses the app. 
    TSAW

  • How do I have photos in iPhoto display on their face the date and time?

    How do I have photos in iPhoto display on their face the date and time? Displaying in the camera shows this. When I check edit the info is there. How do I have that displayed on the face of the photo when I view it in iPhoto?

    How do I have photos in iPhoto display on their face
    the date and time? Displaying in the camera shows
    this. When I check edit the info is there. How do I
    have that displayed on the face of the photo when I
    view it in iPhoto?
    Hi! My name is Tom from San Diego, CA. I have the exact same question as you. That is, I would like to be able to print out a photo from iphoto with the date that picture was taken displayed on the face of it. In this way, someone looking at that picture in a photo album years later would know when it was taken. Did you ever find a method to print copies of photos out of iphoto with the date displayed on the print? Thanks for your help!

  • HT1382 how can I restore my back up files from my laptop? i want to see the dates and time that I backed up  my files. is it posssible?

    how can I restore my back up files from my laptop? i want to see the dates and time that I backed up  my files. is it posssible?

    What backed up files?
    Available backups for an iOS device can be found in Edit > Preferences > Devices.

  • Is there a way to display the date and time on my officejet 6500

    HP Officejet 6500a Plus Windows XP_ Is there a way to display the date and time on the display of my printer

    Are you referring to the Date and Time some cameras put right on the image?  If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
    Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
    If your asking about some other date post back.
    regards

Maybe you are looking for

  • Any option to restrict SE16 record level access based on company code?

    Hi All, I have a requirement to restrict record level access in SE16 based on company code. Our SAP system has two company codes. The requirement is that users of one company code should not be able to see records of other company code in SE16. Is it

  • Adding a field to a structure in an implicit enhancement option

    I'm just trying to append a field to this internal table: DATA: BEGIN OF gt_outtab OCCURS 0. DATA: knumv         LIKE ekbe-knumv. DATA: srvpos        LIKE ekbe-srvpos. DATA: ktext1        LIKE ml_esll-ktext1. INCLUDE             STRUCTURE mmhipo_main

  • Changing hyperlink text color...

    I see how to change hyperlink text colors for a page (normal, rollover, visited, active) but I am hoping for something more complicated- I would like a link to change color on rollover, but stay that color until another link is clicked, then return t

  • How to see the bussiness content querys which are on bussness content CUBE?

    Hi I need to find all the bussiness content queries which are there on  Bussiness content Cube? Can any one tell me where to find or see them in bussiness content ?

  • Parameters in XMLQuery

    Sorry to repost this question but haven't had any reply to the previous post. The question: is how to pass the "EMAIL" in the query below as parameter (instead of hardcoding it). SQL> select acc_no, XMLQuery( 'for $i in /CommRecord where $i/CommType