The deactivation option on my copy of Photoshop CS5 64 does not work. How can I get this deactivated so I can re-install?

when I try to deactivate Photoshop no deactivation screen comes up. I want to reinstall on my PC after a complete system clean and reinstallation of Windows so I really need to get Photoshop deactivated. I'm at a loss as to how to make contact with any support person at Adobe to get this done. be gratefully received.

I went through this a couple of years ago when I built a new desktop. I needed to move my copy of PS CS5 to the new desktop and couldn't get the Deactivate system to work. I had installed PS CS5 on 2 different computers, older desktop and newer notebook.
After calling Adobe, IIRC (that was when you could actually call them), I was told not to worry about it. Just uninstall from the old computer, and or Don't Ever Use CS5 on the old computer again, and install it to the new one. I didn't have any problems. Activation went through without any problems.

Similar Messages

In the URL bar, type about:config Type geo.enabled Double click on the geo.enabled preference Location-Aware Browsing is now disabled, does not work How do you turn this Off!

In the URL bar, type about:config
Type geo.enabled
Double click on the geo.enabled preference
Location-Aware Browsing is now disabled
Google will not remove their location aware feature saying it is picked up by the location aware feature in my firefox browser and referred me to your like where I found the above to disable this feature. It just sent me to a yahoo search page. How do you disable this I want to use US Google not Google.ua and you don't need this to help me locate anything in the Ukraine. When I take my laptop with me on trips does my firefox local change wherever I go?

See:
* http://www.mozilla.com/firefox/geolocation/
*http://browserspy.dk/geolocation.php

Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

My function /automation tool/ in adobe photoshop 10 (new) does not work. how to fix the problem

please help me fix it ....

Hi my operating system is Windows 7. Installing Adobe Photoshop Elements 10
I expect that possess features that I need. Specifically, (AUTOMATION
TOOLS). I wanted to use the AP10. The operation concerns the CREATE of
one illustration of several others (such as panorama). Illustrations come from
a scanner, which I copied from large parts of the one big illustrations
. In other words, in terms of "stich assist."

I got the Beats Pill but when I plug the wire from the pill into my phone the music will only play from the headset and the bluetooth can connect but not work, how do I get this fixed?

I'm really annoyed because I wouldn't have spent over £100 on a speaker if my phone wouldn't allow it to connect

You may want to start here.
http://www.beatsbydre.com/support/

I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can u

I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can use the product I purchased?

Hi Rosera,
This is bad and I am sorry to hear that you are running into these issues.
Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
Have you tried the steps mentioned below by Barbara?
If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
Regards,
Ankush

I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

You can't activate any GSM iPhone without a valid sim card installed in the phone.
So, yes, you need to get a sim card.

HT1918 I'm trying to find the none option to cancel my CC information as it's not working and i want to update my App . please help

I'm trying to find the none option to cancel my CC information as it's not working and i want to update my App .
please help

Unfortunately, AT&T does not allow installation of non-Market apps on any of its Android phones.
You can find instructions online for using the "adb" developer tool to install non-Market apps, or you can wait for an upcoming beta release of Firefox which will be distributed through the Android Market, probably within the next month.

Adobe Photoshop Elements 12 does not work with Yosemite 10.10

My Adobe Photoshop Elements 12 does not work with Yosemite 10.10 nor does my Premier Elements 12. When I try to start them up I get the error message. After uninstalling and reinstalling a few times its still the same. Strangely enough PSE 11 seem to work with Yosemite. I uninstalled my Premier Elements as well and it behave the same way. How do I get a new copy of Premier Elements 12 to reinstall?

Just to further test what is happening to my iMac on Yosemite is I downloaded the trial version of Photoshop CC and when I go to launch it it gives mr the same error message as when I try to launch PES 12 or Premier Elements 12. So whatever the problem is it involves all three and so upgrading to Photoshop CC doesn't even help. Could there be an Adobe file damaged or missing somewhere that is common to these and yet does not effect Revel and Lightroom?

All photoshop cs4 tools are not responding. how do I get them to work, again?

all photoshop cs4 tools are not responding. how do I get them to work, again?

Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, font validation, etc.)?

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT1688 I used a MC $50 Giftcard for the iTunes one day. It was supposed to update the games, and other apps on my phone. Only, it wouldn't go through, the credit card was declined. Still, I was charged 4 times. How do I get this back??

To Whom It May Concern:
I bought a Mastercard Giftcard for $50 the other day. It was only because the games needed updating before I could play them again, and my card on file had expired.
I kept getting a message stating the the card was declined. Also, it kept telling me to try to put in another card, or different form of payment.
I tried several times to get the MC to go through, and it didn't. It was not even showing that the card info even updated!
When I went to check the amount of the giftcard, there were 4 pending charges of $10.89 on it.
How do I get this money back? Please let me know as soon as possible.
Sincerely,
Queenie from Texas

I did but that was from a month before, I want pics I took after that backup time. It deleted without my consent like this is not cool. I had recent pics from my trip.

I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done the fan should be slowing down and getting quiet on its own.

Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

The deactivation option on my copy of Photoshop CS5 64 does not work. How can I get this deactivated so I can re-install?

Similar Messages

Maybe you are looking for