The device need to be very close to the router to connect to the network otherwise it disconnects when it is far little bit
The device need to be very close to the router to connect to the network otherwise it disconnects when it is far little bit.
Try resetting network settings - 'Reset Network Settings'
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Similar Messages
-
This has happened since I upgraded to Snow Leopard. When I use Windows (via Boot camp) I can be anywhere in the room and be able to pick up and connect to my network via my router instantly. However, when using OS I literally have to be less then a meter away from the router.
This didn't happen when I was using Leopard, so why has it changed and how can I improve?You need to boot using the 10.6 Snow Leopard DVD that you bought from the Apple Store.
If your machine had 10.5 when you got it then in order to upgrade to 10.6.8 you must have purchased 10.6. If you've lost that DVD you can buy it again from the Apple Store. -
My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call i recive massege and the device donot close by itselfe
LadySarah
You cannot upgrade from v6 to v7 without purchasing iLife 08.
Can you give more details about your crashing issue. Make of camera etc.,
You can start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts), create an iPhoto library there and see if the problem is repeated. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD
Regards
TD -
I have purchased a new computer and authorized my iTunes with my Apple ID; however, my iPod Classic, which I have had for many years, will not sync hundreds of songs that I have purchased and says the device needs to be authorized.
I have searched high and low and there does not seem to be a way to authorize the iPod Classic. What can I do to sync my purchases to my iPod? I have tried reformatting/restoring it as suggested. It continues to only allow me to sync non-icloud/itunes content.
Help!What exactly happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod -
I have an iphone 4, when I upgraded to ios 7.1.1 the application 'superlive pro' is not functioning well it is stucked and some times the device needs to be restarted
if there is a compatability between the app and newer versions of the ios then likely the developer if he/she knows about it will release an update fixing the issue
but of cause the developer has to know about it so maybe you should inform the developer about the issue and wait for a fix -
Everything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!
Why does iTunes SUCK??
1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
If you do a 2nd item the other items stop loading and never continue!!
This is so BAD, I don't understand how they don't have this fixed yet!!
Please tell me I am not the only one!!
...and If I am tell me how to fix it!
Very appreciated,
JoeEverything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!
Why does iTunes SUCK??
1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
If you do a 2nd item the other items stop loading and never continue!!
This is so BAD, I don't understand how they don't have this fixed yet!!
Please tell me I am not the only one!!
...and If I am tell me how to fix it!
Very appreciated,
Joe -
my friend ipad 2 was stolen if they reset the device in factory setting,just wanna ask if we can still locate the device using find my iphone...mobileme?pls help me,...
It's unfortunate that your device has been stolen. You can report this to the police, but as has been answered before, if the device is restored you CANNOT locate it.
It probably is technically possible to track your device by the SIM; law enforcement will not waste their time doing so. Besides, the thieves have probably changed it anyway.
While unfortunate your iPad is gone, you really need to move on. -
my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regardsDo you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up -
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?
Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't connects to the LAN server that i created in the Game.
Could any one help me please.Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
How to log a kernel panic -
How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
"The software update failed. Make sure that your phone is connected to the computer and try again"
Hi
I just had my xperia Z3c in repairs, and now I seem to have the death screen or something. When I connect to a wall charger or my MacBook, it starts turning on and off, displaying the message "The software update failed. Make sure that your phone is connected to the computer and try again", even when it's connected to the wall charger, not the Mac. I've tried pushing the volume up + on/off button for 10 seconds, and Sony Bridge for Mac doesn't recognize the device. I was told to let it charge for an hour before turning it on at the store, which I did, but again, it starts flashing that message as soon as I connect it to anything.
Pleease help me out
Best regards
MariaConnect your phone to a wall charger > press and hold power & volume up for 10 seconds > let it charge for 2 to 3 hours
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?
TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised. In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck. -
I just downloaded the new software to my iPad but now it won't connect to the Internet. How can I fix this?
Have you tried to reboot your router? Unplug it, count to 30, plug it back in and let it reboot. Also you may want to go into your settings on your iPad and 'reset network settings'.
In case the update messed something up, letting the devices reboot sometimes helps.
Maybe you are looking for
-
MediaBox problem on Windows 7 64bit
Hi, I've noticed problem with MediaBox on 64bit Windows 7. Several month ago everything worked properly - I didn't program it but check on the website: http://javafx.com/samples/MediaBox/index.html (*) Today I've tried to experiment a little with Med
-
Help with GF4 Ti4200 128mb DDR AGP8X VITO
i need help with this card. when i play most of my games, the fonts will appear blur. and also sometimes some textures will appear jumbled up or distorted. can anyone help me with this particular problem? Also, how do i check if my comp is running @
-
Can print over network, but scan over network doesn't work
Scanner communication cannot be established from Windows 7 PC to 1536dnf MP. Printing from that computer is fine. scanning from other computers over the network is fine also. I have uninstalled and reinstalled HP software, but that didn't fix the is
-
Backward Compatibility 2.1 to 2.2
Can I have both versions working on the same portal 2.1 and 2.2? We have many portlets relying on the 2.1 build. What is the best approach here? If there is a particular document or FAQ with this I would like to know as well. Thanks!
-
On the style, I have set up msn email, it shows up, but emails are never received