The disc is the wrong type for the operation

Hello!
I'm using DVD Studio Pro 4 and as I try to burn a double layer DVD I get a message saying "The disc is the wrong type for the operation". I've tried several brands, but I get the same message. What can possibly be wrong?
Thanks for helping me!
/Andreas from Sweden

If you are trying to do this on the internal Superdrive they have problems writing to Dual Layer DVD disks of any make and or type.
IMHO the DVD drive Apple uses is not very good.
If this is a fairly new Mac system I suggest you take it to an Apple store and show them that it can't write to Dual Layer DVD discs of any make and maybe they will replace it with on e that will.

Similar Messages

  • Call of the method START_ROUTINE of the class LCL_TRANSFORM failed; wrong type for parameter SOURCE_PACKAGE

    Hi,
    My DTP load failed due to following error.
    Call of the method START_ROUTINE of the class LCL_TRANSFORM failed; wrong type for parameter SOURCE_PACKAGE
    I don't think anything wrong with the following code as data loads successfully every day. Can any one check?  What could be the issue?
    METHOD start_routine.
    *=== Segments ===
         FIELD-SYMBOLS:
           <SOURCE_FIELDS>    TYPE _ty_s_SC_1.
         DATA:
           MONITOR_REC     TYPE rstmonitor.
    *$*$ begin of routine - insert your code only below this line        *-*
    *   Fail safe which replaces DTP selection, just in case
         DELETE SOURCE_PACKAGE WHERE version EQ 'A'.
    *   Fill lookup table for the ISPG
         SELECT p~comp_code m~mat_plant m~/bic/zi_cpispg
           INTO TABLE tb_lookup
         FROM /bi0/pplant AS p INNER JOIN /bi0/pmat_plant AS m ON
           p~objvers EQ m~objvers AND
           p~plant   EQ m~plant
         FOR ALL ENTRIES IN SOURCE_PACKAGE
         WHERE p~objvers   EQ 'A' AND
               p~comp_code EQ SOURCE_PACKAGE-comp_code AND
               m~mat_plant EQ SOURCE_PACKAGE-material.
         SORT tb_lookup BY comp_code material.
    *$*$ end of routine - insert your code only before this line         *-*
       ENDMETHOD.     

    Hi,
    Compare the data types of the fields in your table tb_lookup with the data types in your datasource. Most probably there is an inconsistency with that. One thing that I realize is that
    I use the select statement in the format select ... from ... into... Maybe you need to change places of that, but I am not sure. You may put a break point and debug it with simulation.
    Hope it gives an idea.
    Yasemin...

  • What are the disc space and memory requirements for the apps?

    What are the disc-space and memory requirements to run the apps

    Hello John!
    thank you for the info. However, as I have only 1Gb memory and a 32Gb
    solid-state disc, I think that I will stay with Acrobate.com for a while
    longer.
    Regards
    Brianb

  • How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

    First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

  • First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longer have access to network settings

    First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings

    Unfortunately, it says I can't delete anything without the missing password.

  • IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball.  I almost think it is looking in the wrong place for the pictures.  How do I redirect it back to the Mac hard drive?

    My iPhoto is not responding.  Whenever I click on the iPhoto icon I get a twirling beachball.  It is as if the machine is looking in the wrong place for the photos.  How can I see where the machine is looking to find out if this is really the problem.  How can I see the path?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
    If that's the case  Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

    Dear SharePoint Developers,
    Please help.
    I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
    I think this is a "sealed column", whatever that is, which is  shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
    I know when I set the column order in my custom Content Type settings page, it is correct.
    But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
    Can you help?
    Please advise.
    Thanks.
    Mark Kamoski
    -- Mark Kamoski

    Hi,
    According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
    Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
    Drill down into one of them and you'll see the option under the list of columns for that content type.
    To apply the column order in the NewDocSet.aspx page, you need to:
    Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
    Content Types section, choose Refresh all published content types on next
    update.
    Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
    More information:
    http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How I can get the Billing Type for the sales order and its items

    How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

    Hi,
    You need to use two tables.
    First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
    Then use the billing document numbers in table VBRK, where in you can get the billing document type.
    Regards,

  • Adobe form is printing wrong data for the first print attempt

    Hi All,
    I need a quick help from Adobe print form gurus. Until now i dint get an issue on printing adobe interactive form from my portal. For eg., when i am giving a print for the first attempt, it was printing the form with wrong data in form fields and whereas when i tried to print it for the second time, then it is printing properly with right information.
    Please help.
    Regards,
    Praveen Kambala.

    Hi Praveen,
    Find out the data what is being printed for the first time, and check what is the flag that is making the change.  Hope that should resolve your issue.
    Thanks,
    Rakesh.

  • Not possible to determine a condition type for the price in ME49

    Hi,
    While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
    Not possible to determine a condition type for the price
    Message no. 06657
    Diagnosis
    When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
    Procedure
    Contact your system administrator.
    The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
    Utsav

    Hi Utsav,
    You can refer to the following link. it might be useful to you
    RFQ price
    Thanks
    Nisha

  • How to add a document type for the residence status GB in infotype 48

    Hi Team,
    How to add a document type for the residence status GB in infotype 48.
    Please answer this  at the earliest.PFA screnshot.
    Thanks
    chris

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

  • LX25 displays wrong data for the entered date range

    System says "Inventory not executed" status for the bins even if Inventory is executed for the bins in the date range provided in the selection screen.
    For e.g.
    I execute report for Warehouse XYZ. I specify date range as 01.04.2014 to 31.03.2015.
    I get some bins in the status "No Inventory executed".I presume that Inventory is not executed for these bins within this period.
    But when I go to each bin in the status "No Inventory executed" I find that The bins are counted on the dates 24.09.2014 and then on 05.04.2015.
    Then I changed the date in the selection screen to 01.04.2014 to 05.04.2015.
    Those bins which were earlier in the status of "No inventory status executed" are now not present in this status.
    Does this mean that LX25 report is based on the Last counted date? Or the report is not displayed correctly for the date range provided?
    I want to know the criteria based on which the LX25 report works.
    Thanks In Advance.

    Hi Jurgen,
    Below information I found from the LX25 report info in SAP.
    Inventory status
    Description
    This report provides information on the stock in the storagae bins and presents this on the screen.  You can limit your selection by warehouse number, storage type and storage bin, or choose the following criteria:
    Total number of bins
    Number of inventoried bins in the selection period
    Bins with active inventory
    Bins with planned inventory
    Bins without executed inventory
    From this list, you can obtain a plan of the individual storage bins with further detail information within a storage type, by clicking on the relevant line total.
    It clearly shows that the report should be able to show the number of inventoried bins in the selection period, which it doesn't. Does it mean that system is not working as expected?
    Regards
    Soumya

  • I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford

    I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford that monthly charge.

    You can download from the page linked below:
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just g

    I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just get a message asking for the disc to be inserted.  any ideas anyone?

    Use the download version:
    Download CS3 products
    Mylenium

  • Mac OS X 10.6.8; iPhoto- photos  to 'burn folder'; press 'burn' symbol. This window appears: 'Burn - The disc can't be burned, bcause the device failed to calibrate the laser power level for this media'; what to do next to address this?-

    have Mac OS X 10.6.8; Put a few iPhoto-photos  to 'burn folder'; press 'burn' symbol. This window appears: 'Burn - The disc can't be burned, bcause the device failed to calibrate the laser power level for this media'; what to do next to address this?-

    That's a hardware issue and I'd ask on the forum for whatever Mac you have.

Maybe you are looking for