The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier.  They are OK in Photoshop CC.  I have been unable to find anyplace to adjust the font size.  I have Windows 7 Pro.  Looking at the Photoshop version history, it lo

The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier.  They are OK in Photoshop CC.  I have been unable to find anyplace to adjust the font size.  I have Windows 7 Pro.  Looking at the Photoshop version history, it looks like this problem comes and goes as Photoshop is updated.  It should be an easy fix.

Try the Photoshop CC 2014 Preference experimental section 2X UI option

Similar Messages

  • My 27 inch imac has just started acting weird, the thumbnail images and folder on the desktop have disappeared although the titles are still visible. When I open a programme the programme windows are all black and the drop down menus just show random

    When I tried to open the web browser the browser flashed black and white at start up, then all the applications when i open a new window are completely black, I am unable to view the drop down menus as the come out as random pixels. This happens to all new applications i have been able to open. The document window opens as plain white but if you click on it  it opens a document even though you cant see any thumb nails. Some of the documents are open as normal images/files. Having been a mac user for 10 years i have never seen anything like this before, any ideas or suggestions

    I have started running a virus check.
    There are no viruses for OSX.  Uninstall the software, repair permissions and restart your computer.  Especially if it's Norton's.  It's known to cause problems.
    To rule out a hardware problem, run the hardware test:  http://support.apple.com/kb/PH11342 OS X Mountain Lion: Use Apple Hardware Test and zapp the PRAM:  http://support.apple.com/kb/PH11342 OS X Mountain Lion: Use Apple Hardware Test.
    In the end you may need to lug your iMac down to your local AASP or an AS.  Diagnostic testing is FREE!
    i have had a mac in fact it is 17 years.
    You got me beat by 3 yrs.

  • Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers a

    Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

    Good day!
    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    Regards,
    Pfaffenbichler

  • The new design seems to be doubled, with the standart windows style underneath the new buttons and also the drop down menus are unreadable..

    ''''''i installed the new firefox and now its got a weird graphic glitch. i run windows 7 starter on my netbook and it seems as if the main window got two layers, the windows style and the new firefox style on top. the problem is, beside that some buttons dont really work, that the drop down menus are not really readable and the highlighting in the dropdown menus stays after going thought them.
    greets

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

  • TS4123 Whenever I open the iTunes store, the home pages of all of the sections (Music, App Store, Films etc) are black. They still have clickable hyperlinks, but I can't see what I'm clicking. Any pages accessed through the drop-down menus or by randomly

    Whenever I open the iTunes store, the home pages of all of the sections (Music, App Store etc.) are BLACK.  They still have clickable hyperlinks, but I can't see what I'm clicking.  Any pagess accessed through the drop-down menus (even iHelp) or by randomly clicking I can't see.

    Thanks but it's just my desktop that doesn't see it though.  My notebook sees it everytime, even at the same exact time that my desktop doesn't see it.  For example yesterday when I was typing up this post, I was typing up the post on my notebook because my desktop didn't see the router.  I don't think it has anything to do with the router actually, but I wanted to see if anyone on here has encountered this issue before.  Other forums have similar issues but I've tried all of the fixes I found elsewhere and they didn't work.
    Any other ideas?
    Thanks!

  • I bought pages on the app store and have math type installed. However I am do not have the option to "Insert Mathtype Equations" either with right click or the drop down menus at the top of the screen.

    I bought pages on the app store and have math type installed. However I am do not have the option to "Insert > Mathtype Equations" either with right click or the drop down menus at the top of the screen. I also have OS Lion installed if this makes any difference. Please help!

    I assume but I can't check that MathType rely on the standard iWork applications location which isn't the one used by the mac App Store.
    Create a subfolder named iWork '09 in the Applications folder.
    Select the iwork applications which you own then drag them into the iWork '09 folder.
    You will be asked to type your password. Don't worry, it's normal.
    It's required because the System must store the infos describing the new location so that, if a new revision is delivered, mac App Store will be able to find the apps where they are.
    When this will be done, try to re-install MathType.
    I guess that this time it will behave flawlessly.
    Yvan KOENIG (VALLAURIS, France) mardi 13 septembre 2011 16:48:19
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Why can't I see the drop-down menus in the organizer? (I see them OK in the editor)

    Why can't I see the drop-down menus in the organizer?  (I see them OK in the Editor)

    Yes you are right.  You have to set it to 100% to see the menu words.  Makes all the print kind of small though..quirky program.
    Date: Sun, 20 May 2012 12:31:36 -0600
    From: [email protected]
    To: [email protected]
    Subject: Why can't I see the drop-down menus in the organizer? (I see them OK in the editor)
    Re: Why can't I see the drop-down menus in the organizer? (I see them OK in the editor) created by 99jon in Photoshop Elements - View the full discussion
    Hi Donald
    Go to the control panel and check dpi scaling under Appearance or Display.
    It’s not uncommon to see a setting of 125% or higher to improve screen readability but PSE requires a dpi of 96 or 100%
    Whilst the Editor Menu will appear at 120% to 149% the Organizer Menu (and the advanced button in downloader) won’t. Sometimes the mouse or tool cursors are distorted.
    Try a setting of 115% or 116% otherwise 100%. A common display resolution, notably for notebooks/laptops, and netbooks is 1024 x 768 but PSE requires a screen height of 800 for full functionality. If your height resolution is out of the range 768 to 800 try experimenting with the slider/settings.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4423842#4423842
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4423842#4423842. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why is "erase junk mail" de-highlighted in the drop down menus.  I'm not able to delete my junk mail box without doing each one individually.  Simple, but please someone help with an answer.  Thanks.

    why is "erase junk mail" de-highlighted in the drop down menus.  I'm not able to delete my junk mail box without doing each one individually.  Simple, but please someone help with an answer.  Thanks.

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

    I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

    Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
    http://www.digitalrebellion.com
    Try deleting your render files and re-rendering the project.
    Start with these and let us know how you go.
    Tony

  • How to do I increase the font size inside the drop down menus?

    I am trying to enlarge the default font size of the drop down menus that appear when you use the items in the menu bar. For example, I want to increase the font size used in the list that appears under "bookmarks." I do not trying to do anything other than this. Theme and Font size changer does not do this.

    Can you clarify with a screenshot which for items you want to change the font size?
    I use this code on Linux for some font sizes:
    <pre><nowiki>/* font-size: sidebar */
    #commonDialog *, #sidebar-box *, #bookmarksPanel *, #history-panel *{ font-size:11pt!important; }
    /* font-size: Bookmarks */
    #bookmarksBarContent menuitem.bookmark-item,
    #bookmarksMenuPopup menu,
    #bookmarksMenuPopup menuitem { font-size:11pt!important; }
    /* font-size: search bar,autohide */
    #search-container .textbox-input-box {font-size:0px!important}
    #search-container .searchbar-textbox:hover .textbox-input-box,
    #search-container .searchbar-textbox[focused="true"] .textbox-input-box { font-size:12pt!important; font-family:"DejaVu Sans Mono"; }
    /* font-size: navigator toolbox */
    #navigator-toolbox menupopup menu, #navigator-toolbox menupopup menuitem { font-size:12px!important; }</nowiki></pre>

  • Firefox 4: the drop down menus in the top menu bar will not appear in Google pages.

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/808729''
    Firefox 4: the drop down menus in the top menu bar will not appear in Google pages. For example, when I click "more" it is like clicking a dead link. Nothing happens. When I click the "tools" icon or my email address to log out, same thing.

    Could you do the following please.
    In the location bar at the top, type '''about:config''' and hit Enter
    In the filter at the top, copy/paste the following setting:
    '''browser.urlbar.maxRichResults'''
    If the figure on the right is a single number, or a minus figure i.e. '''-1''', right click it, choose '''Modify''', remove the current setting and replace it with the figure "'''12'''".
    Then close Firefox and restart it again.
    I went to Google Maps, but as you can see from the screenshot, directions appear to be working.
    You could also try creating a new Profile. See [[Managing profiles]]

  • I want to upgrade from Photoshop Extended CS5 to PS Extended CS6 (I do NOT want CC) but have been unable to find this at a sensible price (or sometimes at all). Help, anyone please?

    I want to upgrade from Photoshop Extended CS5 to PS Extended CS6 Mac (I do NOT want CC) but have been unable to find this at a sensible price (or sometimes at all). Help, anyone please? This is in UK, btw!

    What do you consider a sensible price?  PS CS6 extended is available only when you purchase the CS6 Suite, which is around $1000 for the upgrade from CS5.  PS 6, which is not extended, is about $200, but I'm not sure about upgrading to a single app from a suite.  Adobe used to allow it, but I'm not sure about now.  PS CC and Lightroom 5 combo is $9.99 a month or PS CC alone for $19.99 or the whole CC suite for $29 a month.  The latest CC apps are "extended."

  • Have purchased adobe photoshop elements 13 from amazon and have been unable to find a 24 alpha numeric access code on box or on disc sleeve, need your help

    have purchased adobe photoshop elements 13 from amazon and have been unable to find a 24 alpha numeric access code on box or on disc sleeve, need your help

    do you have a white box inside the outer box and containing the disc sleeve/disc? In my case, it was on the white box. For Photoshop elements it is all numeric and starts with 1057.
    Brian

  • The fonts on my homepage are too small to read; how do I fix it

    I just installed firefox and selected my theme. The fonts on the homepage are too small to read. How do I fix this?
    == This happened ==
    Every time Firefox opened
    == I installed Firefox

    Reset the zoom for that page.
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • Have the drop-down menus in Muse been fixed?

    I recently had a problem with Adobe Muse (Case #0183888983). I was emailed the information that the problem, malfunctioning drop-down menus in my site, had now been fixed. In the meantime I decided on my own to access an earlier version of Muse through Time Machine and then re-save and publish the Muse site with this earlier version. I'm afraid I don't dare open up the Muse site in this fixed version in case it doesn't work as described, and then I have to go through the tedious process again. So there's no way I can tell if my site would function with the new fixed Muse. The next time I create a new site, I'll be able to determine whether the bug has been fixed.

    Muse 3.1 did fix a couple of issues with menu bars.
    http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html
    If you could be more specific about the problem you were seeing, someone could probably confirm if 3.1 fixes it.

Maybe you are looking for

  • Text elements in the Bex Report

    Bex Gurus, When we execute the Bex report, it will display with icons on top as Chart, Filter and Information - Information will display all the text elements as standard. Right now I want to modify these standard elements and disply the text element

  • Can Final Cut Studio 2 make Blu-Ray DVDs

    I have Final Cut Studio 2 on a mac book pro. I am not sure whether this topic belongs in compressor or dvd studio, but does the HD DVD mean it is HD DVD Format or a DVD that is high definition. So, in other words, can I do Blu-Ray also.

  • How do I filter for untouched photos?

    Is there a way to find all photos in my catalog that I haven't touched up? My catalog has tens of thousands of photos. I've already rated/marked the ones I like, but I haven't touched them all up. Going through each one to check if it's already been

  • Latest nightly build create new component possible bug?

    hey guys... so i updated my flash builder to the latest nightlly build... and one of the things i discovered is that the "halo" namespace has been changed to "mx" I was wondering why when i create a new component the halo namespace apprears instead o

  • How to repair a damaged project microsoft?

    MPP Project file causes Project 2010 to the closure. . Does anyone have a clue as to how to solve? There is a way to solve the mpp viewer than it is online?