The edit button disappears when I have the link window open, so how do I copy and paste address for email link?

When I want to create a link to a web page in an email, I click the "link" icon and a window appears asking for the address. But simultaneously, the "edit" function and all other functions disappear from the Firefox toolbar. With no edit, how can I copy and paste the address? I have tried highlighting the address and dragging it into the window, but it won't drop into the window.
I have resorted to copying the address to a document and then pasting it into the link window, but there must be a less cumbersome way.

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden.<br />
You can make the Menu bar visible via View > Toolbars, also accessible via Firefox > Options.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
* View > Toolbars : [X] Menu Bar

Similar Messages

Why does the "Junk" button disappear when I have multiple e-mails selected?

Very annoying! First thing I do when I open my e-mail is to multi-select all of the junk... and then I have to right-click - could the button just stay put???
THANKS!
m.s.

Can you make a screenshot to show where this button is?
https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem
AFAIK, Thunderbird doesn't have a native Junk button. The one I use was put there by the Junquilla add-on.

The edit button is spinning forever in the ibooks app. How to make it stop?

The edit button is spinning forever in the ibooks app. How to make it stop spinning?

I used to have this problem on a iPad 2 with iOS7 (and iOS6). Everytime I would install a new PDF, iBooks would churn away like it was scanning it. The book wouldn't even show up for me to read until the churning stopped. Eventually the edit button would re-enable and the doc would appear.. It seemed to keep getting worse each time.
I then did a complete restore to the iPad. Now when I load a new book, it immediately is available for edit. iBooks still works fine 3 months after I did the restore.
...Mike

After upgrading to IOS 5, the edit button doesn't appear in the CONTACTS

After upgrading to IOS 5, the edit button doesn't appear in the CONTACTS. Any idea, why?

If you have a gmail, yahoo, or even icloud etc. account go into settings>mail, contacts and make sure you're not syncing through yahoo for example.. Turn that off, if that still doesn't work delete the yahoo account and simply set up the account again..will add the + & edit functions again..

I am unable to open another Firefox4 window when I have the Error Console open and I can't open the Error Console when I have two Firefox4 windows open. Is anyone else having this problem?

I am trying to debug the jQuery to a micro site I've created and I am unable to open the Error Console when I have two Firefox windows open and I am unable to open a second Firefox window when I have the Error Console open.
I am using Mac OS X 10.6.7 and I am using Firefox 4.0.1

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video?

Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)

You asked your question on the wrong forum. Try one for the Flash Player

How do I change my plan to the student/teacher plan when I have the individual plan

how do I change my plan to the student/teacher plan when I have the individual plan?

To change your subscription you FIRST need to contact Adobe support to be sure you will not have to pay a termination fee - Adobe contact information - http://helpx.adobe.com/contact.html
Adobe Education... Start here https://creative.adobe.com/join/edu
Education Plan https://creative.adobe.com/plans?plan=edu
When you buy an Education subscription, the terms you "click to agree" should be clear about the first/later years
-One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
Redemption Code https://creative.adobe.com/educard
ID Proof http://www.adobe.com/store/au_edu/academic_id.html

HT3939 My iphone 4S has mute activated. It will not un-mute by taping the mute button or when I turn the phone off then back on.

Unmute not working model 4S
My iphone 4S has mute activated. It will not un-mute by taping the mute button or when I turn the phone off then back on.

Hi Lukeohiggins,
If you are having issues with your iPhone unexpectely powering off, you may want to try the troubleshooting listed under Power/Battery > Will not turn on, will not turn on unless connected to power, or unexpected power off in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
- Brenden

I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it. I've tried restoring it and restarting it but nothing seems to work.

I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I have multiple browser windows open - but in the "minimized" mode - and I want to open up one of them for viewing, ALL of the windows automatically open as well. How do I prevent this annoying function. I cannot find it anywhere in the options.

This does not appear to be a system issue, but rather a functional aspect of the browser windows. E.g., if I have 7 browser windows open to different sites... and all are Minimized, and I decide to open one to study, THEY ALL POP OPEN automatically. I am using Firefox v3.6.8 on Windows 7. This is an annoying behavior of the browser, and I am sure it can be somehow "turned off" but cannot determine how to do that. I have looked through all options. I am not a techie, but have reasonable proficiency with software apps.

This can happen if you drag a tab slightly down in the browser window while clicking.
Firefox has a feature called tear-off tabs
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
You can also do this via the right-click context menu of a tab: Move to New Window
You can drag that tab back to the tab bar in the original window to undo that detaching.
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

How do I copy and paste an image form the internet to Keynote. I have done this successfully in the past by selecting copy and then paste by using the right click function and now am unable to do so. I am thinking it is an outdate OS problem...not sure.

How do I copy and paste an image from the internet to Keynote. I have done so successfully in the paste by using the copy and paste right click functions but am unable to do so now. That was about a year ago that I attempted that I was able to do this. Thank you for your help.

Some images are copy-protected.
If all else fails, you can make a screen shot of the image:
With the image visible in your browser, press CMD-Shift-4 and your cursor will change to crosshairs.
Position the cross hairs at one of the corners of what you want to copy and drag to the opposite corner, then release the mouse. An copy of the image will be saved to your desktop.
You can now edit and use this image.
Be sure to respect copyrights.
Message was edited by: bwfromspring hill

I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the i

I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the image of the radio two times. How can I DO THIS!?!?!?! Thanks!

In Editor, go to the expert tab.
Open picture B, the one you wish to select the radio from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and the radio B on a separate layer.

My mother contacts disappear when she sends a message or call someone, how is this possible and how to fix it?

My mother contacts disappear when she sends a message or call someone, how is this possible and how to fix it?

Technically the limit of 4Gb per folder should have been removed in a recent patch. Personally I an unconvinced as the developers have said so twice before and something else arose to bite people at 4Gb. So the limit probably does not exist anymore and moving mail and compacting will fix it without data loss if it occurs as recent issues have been about displaying mail after the 4Gb point, not storing it.
Use the Ctrl and Shift keys in conjunction with your mouse to make multiple selections.
click followed by Shift+ Click selects everything between the two clicks, including the items clicked.
Holding the Ctrl key while clicking allows you to select or deselect mail to either fine turn the list from shift clicking or to make one of your own.
Ctrl +A selects everything in the list from the current selection to the end.
One option is create an important folder and move your important stuff to it then ctrl +A the whole remaining inbox.

How can I copy and paste a caption for several pictures that are all the same?

I'm trying to understand the process of importing, labeling and organizing pictures I'm importing from my iPhone into iPhoto 11.
So far I am importing only pictures that relate to one another; ie taken at the same event. I have 18 pictures from one hike. I'd like to label each of those pictures the same; ie "hike at Bear Creak 2/15." Can I copy and paste the same label to all 18 pictures? How would I copy and paste?
There are lots of You Tube videos on the subject of iPhoto and that's how I learn best. If you know of a really basic one to watch I'd appreciate it.
I think I have to take a class at the Apple Store on this basic organizing because it's really escaped me in the 9 months I've had this Mac (switched from PC.)
Thanks,
Ginny

I have 18 pictures from one hike. I'd like to label each of those pictures the same; ie "hike at Bear Creak 2/15." Can I copy and paste the same label to all 18 pictures? How would I copy and paste?
Ginny,
select all 18 photos at once in iPhoto on your Mac and then use the menu entry "Photos > Batch Change"
That will change the titles or descriptions of all photos at once.
-- Léonie

How do I copy and paste from one page or file to another page or file - on the same screen?

How do I copy and paste from one page or file to another - on the same screen?

Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale.

The edit button disappears when I have the link window open, so how do I copy and paste address for email link?

Similar Messages

Maybe you are looking for