The Error Message in Tax Code determination Set up At the time of updation
When I update the taxcode in the Valid Period-Setup Form Taxcode determination Forms of the SAP, an error message occur "THE COMBINATION OF KEY FIELDS CANNOT BE DUPLICATED" in the status bar at the time of Update button pressed.what is the reason for this error message? how can I overcome the above error msg and update the taxcode ?
What is your B1 version and PL? You may check this: Re: Problem related to the Cenvat Tax Code
Thanks,
Gordon
Similar Messages
-
I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
How do I fix this?Hi there scarbo59,
You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below.
iOS: Unable to import photos to computer
-Griff W. -
# Question
Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
Java(TM) Platform SE 6 U24
Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24 -
I have the system "windows 8.1". When I try to install Photoshop Elements 9 I became the error Message; Photoshop can't be install, I need the Internet Explorer 4.0 or higher. The setup will be closed.
There is a problem with IE10+ in that it is mistakenly seen as being IE1. To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)
-
I want to share files from iMac to MacBookPro. In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service." What do I need to FIX???
Care to share which OS you are using?
Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> -
I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files -
i am not able to active my ipone 3gs after upgrat to ios5.1.1. it show error message " your iphone could not be activted because the activation server is temperarily unavailable.try connecting you iphone to itunes to activate it, or try again in a couple of munutes" i retry many time, could not sold problem.
You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
I recently upgraded my OS from 10.4.11 to 10.6.8, so that I could download iTunes to my new iPhone 5. After upgrading to 10.6.8, I received error message about my Symantec Norton anti-virus security, so I upgraded that to security that's compatible with 10.6.8. Now I receive the error message above, about my Start-Up Items folder. There are currently no items in the folder. How do I get rid of the error message above? Thanks for any help.
Hello,
Resolution:
To prevent the "Insecure Startup Items folder detected" message from appearing
Open Disk Utility from /Applications/Utilities.
Select the name of the volume where Mac OS X is installed (default name is "Macintosh HD").
Click the Repair Disk Permissions button.
After permissions repair is complete, restart Mac OS X and verify that the message no longer appears.
http://support.apple.com/kb/TS3493?viewlocale=en_US -
How to correct the error message that appears when installing photoshop CS5 for the third time
I need help so solve the error message that appears on my computer when I try to register the program for the third time. Please helpppppp!
If you're referring to the activations warning, simply call support to reset them.
Mylenium -
Warning/Error Message for Tax Code Mismatch between PO and Invoice
Hi Experts
Is there any SAP standard warning/ error message thrown when the User changes the tax code in the invoice which does not match the default tax code of the PO? The client would like to identify a 'tax code variance'.
If no, is there anyway we can configure this? I have checked in OMRM and OBA5 and could not find any relevant message types for the above requirement.
Any inputs would be helpful.
RegardsHi,
Can you maintain the validation for your requirement, when user change the tax code system give warning or error message automatically.
Edited by: Lavanya.ch on Dec 15, 2011 8:15 AM -
Install Error Message "There is no application set to open the document"
I've tried to install two different programs, one is a PDF veiwer, and the other is the program MAX/MSP onto my macbook pro and I keep getting the following message when I try to install: "There is no application set to open the document “Max 6 Installer'"
How do I fix this?
Thanks!Hmmm. Haven't used a Mac very long, have you?
OK, let's give this a try:
Per previous post get to the Open With panel.
From the dropdown menu select Other.
You should see a File Open dialog like below:
Navigate to the desired location:
Note that on your machine the hard drive is probably named, Macintosh HD, instead of Test Bed as you see above.
After you have selected the Installer click on the Add button. -
error
19e529fd-3785-410e-ad4e-f4c8542ade52 2014-03-17T21:40:59.079Z err { message: '@D
efault is not a parameter for procedure sp_Address_UPDATE.',? type: 'alert',?
stack: 'Error: @Default is not a parameter for procedure sp_Address_UPDATE.\n
at TDSStream.onRequestComplete (c:\Projects\caa-api\lib\data\tedious\TDSS
tream.js:67:11)\n at Request.callback (c:\Projects\caa-api\node_modules\t
edious\lib\request.js:24:27)\n at PooledConnection.Connection.STATE.SENT_CL
IENT_REQUEST.events.message (c:\Projects\caa-api\node_modules\tedious\lib\
connection.js:198:29)\n at PooledConnection.Connection.dispatchEvent (c:\Pro
jects\caa-api\node_modules\tedious\lib\connection.js:465:59)\n at Messag
eIO. (c:\Projects\caa-api\node_modules\tedious\lib\connection.j
s:419:20)\n at MessageIO.EventEmitter.emit (events.js:92:17)\n at MessageI
O.eventData (c:\Projects\caa-api\node_modules\tedious\lib\message-io.js:59
:21)\n at CleartextStream. (c:\Projects\caa-api\node_modules\t
edious\lib\message-io.js:3:59)\n at CleartextStream.EventEmitter.emit (even
ts.js:95:17)\n at CleartextStream. (_stream_readable.js:746:14)' }
existing Proc
sp_helptext sp_Address_UPDATE
CREATE PROCEDURE [dbo].[sp_Address_UPDATE]
@AddressID INT OUTPUT,
@Line1 NVARCHAR(400) = NULL,
@Line2 NVARCHAR(400) = NULL,
@Line3 NVARCHAR(400) = NULL,
@UnitNumber NVARCHAR(30) = NULL,
@City NVARCHAR(400) = NULL,
@StateProvinceID INT = NULL,
@PostalCode NVARCHAR(50) = NULL,
@CountryID INT = NULL,
@Latitude NUMERIC(30, 8) = NULL,
@Longitude NUMERIC(30, 8) = NULL,
@Elevation NUMERIC(30, 8) = NULL,
@Active SMALLINT = NULL,
@ModifiedBy NVARCHAR(50) = NULL,
@Error NVARCHAR(400) = NULL OUTPUT,
@Locality NVARCHAR(400)=NULL,
@AdministrativeArea NVARCHAR(400)=NULL,
@AdministrativeSubArea NVARCHAR(400)=NULL,
@Country NVARCHAR(400)=NULL
AS
IF @Country IS NOT NULL
SELECT @Countryid = CountryId
FROM countries
WHERE ( Country = @Country )
OR ( CountryAbrv2 = @Country )
OR ( CountryAbrv3 = @Country )
IF @AdministrativeArea IS NOT NULL
SELECT @StateProvinceID = StateProvinceID
FROM StateProvince
WHERE ( abbreviation = @AdministrativeArea )
OR ( name = @AdministrativeArea )
-- BEGIN TRAN
UPDATE a
SET Line1 = ISNULL(@Line1, a.Line1),
Line2 = ISNULL(@Line2, a.Line2),
Line3 = ISNULL(@Line3, a.Line3),
UnitNumber = ISNULL(@UnitNumber, a.UnitNumber),
City = ISNULL(@City, a.City),
StateProvinceID = CASE
WHEN AdministrativeArea IS NOT NULL
AND @StateProvinceID IS NULL THEN NULL
ELSE ISNULL(@StateProvinceID, a.StateProvinceID)
END,
PostalCode = ISNULL(@PostalCode, a.PostalCode),
CountryID = CASE
WHEN Country IS NOT NULL
AND @CountryID IS NULL THEN NULL
ELSE ISNULL(@CountryID, a.CountryID)
END,
Latitude = ISNULL(@Latitude, a.Latitude),
Longitude = ISNULL(@Longitude, a.Longitude),
Elevation = ISNULL(@Elevation, a.Elevation),
Active = ISNULL(@Active, a.Active),
ModifiedDate = GETDATE(),
ModifiedBy = ISNULL(@ModifiedBy, ModifiedBy),
locality = ISNULL(@locality, locality),
AdministrativeArea = ISNULL(@AdministrativeArea, AdministrativeArea),
AdministrativeSubArea = ISNULL(@AdministrativeSubArea, AdministrativeSubArea),
Country = ISNULL(@Country, Country),
geogcode = CASE
WHEN @latitude IS NOT NULL
AND @longitude IS NOT NULL THEN geography::STPointFromText('POINT(' + CAST(@Longitude AS VARCHAR(20))
+ ' ' + CAST(@Latitude AS VARCHAR(20)) + ')', 4326)
ELSE NULL
END,
geocode = CASE
WHEN @latitude IS NOT NULL
AND @longitude IS NOT NULL THEN geometry::STPointFromText('POINT(' + CAST(@Longitude AS VARCHAR(20))
+ ' ' + CAST(@Latitude AS VARCHAR(20)) + ')', 4326)
ELSE NULL
END
FROM [Address] a
WHERE a.AddressID = @AddressID
IF EXISTS(SELECT *
FROM address
WHERE Addressid = @addressid
AND ( locality IS NOT NULL
OR AdministrativeArea IS NOT NULL
OR country IS NOT NULL ))
SELECT AddressID,
Line1,
Line2,
Line3,
UnitNumber,
isnull(Locality, City) AS 'Locality',
a.StateProvinceID,
isnull(administrativeArea, S.Name) AS 'AdministrativeArea',
AdministrativeSubArea,
a.PostalCode,
a.CountryID,
isnull(c.Country, a.Country) AS Country,
a.Latitude,
a.Longitude,
a.Elevation,
a.ModifiedBy,
a.ModifiedDate
FROM [Address] a
LEFT JOIN stateprovince s
ON s.stateprovinceid = a.stateprovinceid
LEFT JOIN Countries c
ON c.Countryid = a.Countryid
WHERE AddressID = @AddressID
ELSE
SELECT AddressID,
Line1,
Line2,
Line3,
UnitNumber,
City,
StateProvinceID,
PostalCode,
CountryID,
Latitude,
Longitude,
Elevation,
ModifiedBy,
ModifiedDate
FROM [Address]
WHERE AddressID = @AddressID
RETURN @AddressIDNothing in the procedure is right. The “sp_” prefix has special meaning in T-SQL, so the name is wrong. THEN it gets even worse.
No postal service in Earth uses 400 character address lineS. Can you give me an exampelf of a city_ with 400 characters?
Longitude and latitude are done with FLOAT because of the math used. ISO country codes are CHAR(3). Addresses do not have an id; we have “<something>_address” in RDBMS. Do you want some industry standard like the SAN?
The (ModIFiedBy, ModIFiedDate) pair is audit data, so it is illegal to have it in the table under audit.
Your code is BASIC or COBOL written in T-SQL with 1960's with IF-THEN control flow and not in declarative SQL! Why did you fail to use COALESCE?
Look at how to write a MERGE statement and get rid of this procedure. And look at an address scrubbing tool for the data. In the future, post DDL and follow minimal Netiquette.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
I trying to download a book as a pdf to view through my adobe reader. But every time I do I keep getting the same error message saying that the file is not a supported file type or because the file has been damaged it can't be opened or viewed. What do I do and how do I get it to work. Because as of now I only have one option of downloading the book and I've tried to download the app notable pdf to see it that worked but it didn't either. As of right now I'm using google chrome but I also tried using Safari but it's still not working. I have a Mac with a Mac OS X updated system. I need an answer ASAP. Can anyone help me?
I have the same issue. Almost none of the PDFs I download from Safari browser can be opened. Same message about the file being damaged or not really a true PDF. Neither of these are the issue here. Size of file is not an issue. I have Acrobat Reader XI so I believe that's pretty up to date. If I open with Text Editor the file is blank. any ideas?
-
Both when I open Encore as a standalone program, and when I try and export my work via Adobe Link to Send to Encore, I get the same error message - "Adobe Encore has stopped working. Windows will close the program. Help would really be appreciated. Thanks.
Now that is impressive Stan, thankyou! So simple ... I don't suppose you know why the "build" button is greyed out do you? Don't worry if you don't have more "magic dust" at your fingertips, I'll re-check my settings again, and again ... Thanks for your help. Doreen.
-
Error message is listed in topic..appreciate any help
thanksI've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!
Maybe you are looking for
-
Airport express no longer recognized within my home network
Home wifi no longer recognizes my Airport Express which I used to tether itunes to stereo. Any suggestions or is it broken or too old? How do I tell?
-
i just got the new 5s and when i downloaded my contacts from iCloud a lot of them were missing!!!! i tired to make a new backup from my old iphone but it didn´t worked, what can i do to get all my contacts?
-
Imported photos to ipad they are not looking the same
i had synced photos to ipad from PC(windows XP) using itunes on PC. After Syncing they are not looking similar they are looking like negatives of original images on PC..
-
Hi All, I am doing the HR master data upload, I found one idoc HRMD_A but i am unable to find the infotypes PA2001,PA2002,PA2010,PA2012 in this idoc type. Could you please let me know in which type i can get all inoftypes including these . Thanks, S
-
How To Make File Association Changes Permenant
I'm having a problem with file associations reverting back every time I turn of my computer. I'm using Finder "change all" function to change the file association. It works until I turn off my computer. Once rebooted file associations return. It's