The expression is not being displayed in the alert inbox

Hi,
I have created an expression in 'Long and Short Text' tab present in the ALRTCATDEF transaction screen.
The expression is "test Error in message &SXMS_MSG_GUID&". However if i goto alert inbox, this expression is not getting displayed. I tried putting this expression under Message title, Short text and Long text tabs. But no change in the result.
In the above expression, SXMS_MSG_GUID is a container variable declared in ALRTCATDEF transaction screen.
Same is the situation irrespective of the container variable being used - SXMS_ERROR_CAT etc.,
I appreciate your early response.
Regards
Ganesh

Hi Venkat,
Without using BPM, you can think/try out with triggering an alert from UDF:
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Otherwise, you can use email functionality to notify the error message rather an alert....so that you can customize your output format/or error message required.
Also check out this Michal's blog on ALERT Configuration..
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Hope this wull help.
Nilesh

Similar Messages

  • Fieldname in not being displayed in the table maintenance

    Hi Experts,
                     I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
    on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
    everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
    plz help.
    Thanks n Regards,
    Mukesh

    Hello Mukesh,
    As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
    If you are assigning the data element and the field label is empty, then + sign will come. In other case -  if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
    In both the above cases, you can change the column header manually in the layout.
    Regards,
    Selva K.

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • Date not being displayed in the custom format

    Hi ,
      I have a problem wherein i am unable to change the format of the date.
    I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
    I have binded date from the context, used the Current Date field provided by SAP.  Nothing works.
    Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
    Please suggest as to what the issue could be.
    Thanks,
    Soumya.

    Hi All,
    Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
    data: v_int_date like sy-datum,
            v_ext_date(10).
    v_int_date = '20110201'
    write v_int_date to v_ext_date MM/DD/YYYY.
    Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
    Is there any solution for this? How can I 'override' defaults in the SAP User Master?
    Thanks,
    Mahesh

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • [svn:bz-trunk] 23143: Certain code needs to check the existence of the class validation validator  (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method .

    Revision: 23143
    Revision: 23143
    Author:   [email protected]
    Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
    Log Message:
    Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method.  Promote it to be at the top instead of at the bottom.
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

    Revision: 23143
    Revision: 23143
    Author:   [email protected]
    Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
    Log Message:
    Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method.  Promote it to be at the top instead of at the bottom.
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

  • Excelicon is not being displayed in the alv output

    Hi,
         iam using the standard tool bar, yet the excel icon is not being displayed in alv ouput.and also in the menubar list export the spreadsheet option is gr

    OSS# 1140542?
    or  you may search other.
    Edited by: Amit Gujargoud on Nov 3, 2008 3:10 AM

  • Text Variables are not being Displayed in the Output of the Query

    Hi All ,
    We have some column headings , which are populated through the Text Vaiables , But in the Query Ouptput only the tech names of the Text variables are being displayed . can anyone tell me why its happening like this . I want to debug the Query , please guide me in this regard
    Thanks in Advance.. Pls reply me as soon as possible

    Hi Nagarjuna reddy,
    Click on the properties of the infoobject enter the name of the description and next to that you can see the X/? buttion click on the this button and select the field/if the proper field is not there then create a field descriton and select. i hope this is works and correct me if i am wrong. for debuggin the query use a transaction code- RSRT.
    regs,
    Vachan

  • Inspection Characteristic is not being displayed in the inspection lot

    I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
    But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
    Please let me know how to get the inspection characteristics in the order.
    I have checked the task list, in that the Inspection characteristics is visible.
    Please help
    Praneet

    I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
    Both the Inspection lot the task list is same
    Please reply

  • Run data not being displayed in the data view tab following a run

    Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab.  I am now having to drag it over from the project documentation tab.  I am sure there is a quick fix.  What is it?  Also, how can I password protect to prevent this type of issue in the future?

    Benbrax wrote:
    Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab.  I am now having to drag it over from the project documentation tab.  I am sure there is a quick fix.  What is it?  Also, how can I password protect to prevent this type of issue in the future?
    So they changed something?  You don't have a backup of the software, nor any kind of software control?  Where I work, you can't even run modified code on a production unit, else you just created an expensive "engineering unit."  Could be they deleted just one data wire and it may take you hours to find it.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Whenever a record is Edited the rows are not getting displayed in the repor

    Hi all,
    When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
    Please Any body faced this situation...
    Help me to identify what error i am doing........
    thanks in advance
    kavitha L

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • TS3850 I am using a Sony HBR -VLU camera to import into Final Cut 10. Plugging into an I MAc that doesn't have a firewire port. The camera is not being recognized by the computer. The camera is set to play tape too. Why is camera not recognized?

    I am trying to import from the camera into an I-MAC. I'm told the I-mac does not have the firewire port, but has thunderbolt. Is the only way to get video from the camera via a firewire port? Is someone giving me bad information as to the firewire port not being on the I-MAC? The camera is not being recognized. Thanks in advance.

    Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
    There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
    Russ

  • Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

    Hi,
    I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
    Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
    2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one  for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
    I am not sure what is the reason for this. Can anybody help  me sort out this Issue.
    Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
    Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data  Tab in the Invoice.
    Regards,
    Deepak.

    Dear Praveen,
    please check into IMG if You defined the WT type You are using for Your Comapny code:
    IMG --> Assign Withholding Tax Types to Company Codes
    I hope this helps.
    Mauri

  • Udf Data is not being displayed in the report

    Hi all,
    i have designed one report in which i am displaying some udf fields along with other system fields.
    i have not used any selection criteria.
    when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
    If i open sales order and press 'Shift-F2'  and update the document and now if i run report then i get that udf value in the report.
    why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
    pls suggest some solution.
    regsrds,
    Chetan.

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • JLable components not being displayed in the panel of the applet

    I am having the problem with the display of the JLabel components in the Panel component of the Applet.
    The JLabel components do not appear in the Panel of the applet unless i minimize or maximize the applet.

    hello...
    i just had the same problem... it was solved by using the .updateUI() method.
    in my case several textFields were dynamically added to a jpanel, there we called the method on that panel.
    ptf.updateUI();     
    hope it works.
    ----------++-----+
    ...algun dia todos seremos luz...
    -zoe

Maybe you are looking for