The "Far Far Away" title is displaying a white box rather than the entered text.  Is there any way to restore the title code so that it works properly?

The "Far Far Away" title (which I have used quite frequently) has stoped working and just displays a white box where the text should be displayed.
Has anyone else experienced this problem or have a suggestion as to a resolution.  This is in IMovie '11 Version 9.0.8.

Thanks for the reply Russ.
Yes, I've considered adding titles and/or generators in the FCPX storyline, but this creates a need to render the entire timeline. As I'm juggling library locations and hard drive spaces I just didn't want to add a new render that will occupy a lot of space. It's also a bit of visual clultter for me, so my goal is to find the best workflow for adding this stuff on or after export.

Similar Messages

  • HT4859 Is there any way to restore the contacts from the iCloud onto my existing phone?

    I had all my contacts disappear this afternoon.  Is there any way to restore the contacts from the iCloud onto my existing phone?  This article makes it seem as if the iCloud information is only accessible upon setup of a new devise.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • The data fields in a filled-out PDF form disappeared after a crash.  Is there any way to restore the lost entries?

    Adobe Reader crashed while I had a filled-out Adobe PDF form open.  When I reopened the file, I found that all of the data that had been entered into the form fields had disappeared.  Is there any way to restore the data that is missing?
    I note that the "Restore" command in the Adobe Reader file menu is not available (grayed out).
    Thanks for your time.

    Hi a2jc4life,
    maybe you can restore your deleted profile with this tool
    http://www.chip.de/downloads/FileRestorePlus_29645008.html

  • Is there any way to restore the 'Open New Tab' option in the tab bar drop-down menu?

    After years of using tabbed browsing in Firefox, I've long-since gotten used to right-clicking the tab bar, and selecting the top menu item 'Open New Tab'. So much so that it has become reflexive. Now with v4, when I perform the same action, it now just reloads the current page. Is there ANY way to restore the option to the pull-down menu? I don't wanna have to move my pointer all the way to the other side of the screen just to open a new tab... (T_T)

    Hello, I suffered from a similar problem with the new search bar type. I've found that you can go into '''about:config''', then search for '''browser.search.showOneOffButtons''' boolean and toggle that. This should restore the old functionality. (You might need to restart your browser)
    Note that, like always, edit your '''about:config''' at your own risk.
    credit: [http://www.askvg.com/how-to-disable-new-one-click-search-bar-interface-in-mozilla-firefox/ askvg.com]

  • My power just went out for a few seconds- is there any way to restore the document I was working on?

    My power just went out for a few seconds. Is there any way to restore my document? I had already had 2 hrs worth of work for an interview tomorrow and do not have time to start from scratch?

    UPS
    http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    Recovery Mode
    http://support.apple.com/kb/HT4718
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    http://www.apple.com/support/timemachine
    General purpose Mac troubleshooting guide:
    Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
    What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    You should have TimeMachine saving your work, YOU need to be doing Save As somewhere else as you work, you don't say what application and whether you have Lion 10.7 or later (10.8.4)
    Can't say enough for the importance of using a UPS. Get one and plug your modem, router, computer into one and don't worry about data loss and lost modem or corruption or the effects to electronic devices.
    This forum deals with a desktop/tower 65lb Mac Pro
    http://www.apple.com/support/macpro

  • Is there any way to restore the original function buttons on the main bar?

    I'm used to having my 'Stop Loading', 'Home', 'Reload' buttons to the left of the address bar... Is there any way in FF 4 to add those buttons back to the bar?
    I get the concept of chasing the 'awesome bar' concept, but some of us prefer to have more direct and immediate control of these functions, rather than having someone else spoon-feed over simplified controls to us.

    That took care of it! But a caution to anyone wanting to do the same things: Make sure you know the exact name of your Persona if you use one, cause if you use the Strata XP plugin to restore the colors to your function buttons, because when you use the plugin, it will eliminate your current Persona... At least as far as I can tell- I can't find the original setup of my old Persona, so am now having to search for it all over again... :'(

  • I have the silver apple tv. I just purchased a new computer with Windows 7. Is there any way to make the 2 compatable?

    I have a silver Apple TV. I just purchased a new PC with Windows 7 on it. Now my apple tv won't communicate with the new PC. Is there any way to fix this or will it only work with systems up to Windows Vista?? Please help.

    I seem to be stalking you tonight AC
    Or vice versa ;-)
    I'm actually quite peeved about all this iCloud stuff, shafting of MobileMe members with no clarity about long term availability of features many pay for above and beyond e-mail/contacts/calendars (my family pack renewed a couple of weeks ago, this is just like the .Mac transition debacle), US only rollouts of redownloading music purchases to iTunes (like the AppleTV global content apartheid we see), continual need to upgrade to latest hardware to run iOS 4/5, older pre Core 2 Duo machine unable to run Lion.......there's a pattern and I'm getting rather fed up with Apple dumping support for things.
    Oh and while I'm at it how about the situation that those who've purchased using multiple Apple IDs cannot use the Cloud for more than one ID at a time, and changing disables the ability to change back for 90 days - I'm not one but there are many users who have more than one ID because they've changed e-mail addresses or have devices used by more than one family member.
    With all the hoo-hah surrounding Sony getting hacked, I'm not honestly sure I want my stuff in the Cloud for Apple or anyone else to peruse.
    AC

  • I have the iphone 2g with the $20 unlimited data plus 200 texts, is there any way to keep the tiered text messaging plan when I upgrade to the iphone 4s?

    I have the original iphone on AT&T with the $20 unlimited data with 200 text messages.  I know that I can keep the unlimited data plan when I upgrade to the iphone 4s, but I would also like to keep my 200 text message plan.  Is there any way for me to keep this feature?  Also on the original Iphone, I could upgrade to the unlimited data plan with 1500 text messages, if I upgrade this feature, will it extend my contract?
    Thanks,
    Ray

    Sorry no, there isn't a way to turn off those reminders.
    You can send Apple a feedback here  http://www.apple.com/feedback/

  • Is there any way to restore the firmware on a MacBook 5,1?

    After the update to mountain lion, my computer started giving me an SOS beep at startup. After a cycle or two it would start up and function normal until next time the battery died or when i had to restart it. Over the last couple months though it has gotten worse to the current point of not starting at all.
    Prior  to mountain lion I had upgraded with more ram and an ssd, so yesterday I got a new drive and tested the old ram on the MacBook, but problem remained. So I am thinking at this point it might be the logic board failing. A hardware failure seems a strange coincidence to me, maybe this could be a bad firmware update?
    Just wondering if it is possible to restore the firmware on this model of MacBook? Cannot find a restoration cd for my specific model.
    Kind of desperate at this point as I am required to have a computer for school and don't really have the money to buy a new one this time of year. Replacing the logic board seems too expensive to be worth it.

    How would you re-enable it?
    Maybe clamshell mode is an option for you:
    http://support.apple.com/kb/ht3131
    charlie

  • My iPhone 5 was restored to factory settings in error . I discovered that i cloud wasn't turned on and iTunes seems to have stopped backing up since the beginning of February.  Is there any way to restore the data. Any restoration programs?

    When I intially synced to Itunes I got an error message -50.  Many of my apps were lost also as well as a month's data. I upgraded my software to 7.0.6 and tried again.  The apps returned but the data is still missing.  I see that there are many data restoration programmes out there but do they work and which is the best?
    I'd appreciate any help.

    Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
    Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password.

  • Today's update seems to have modified the interface for the search engine bar to icons rather than a list. Is there any way I can change it back?

    I know everyone says they "hate" changes to familiar interfaces at first before growing accustomed to them, but I just personally don't care for the icon-tray look in anything I use (it seems to defeat at least some of the point of using Internet on an actual computer rather than on a mobile phone). I also sort of have a lot of search engines up there, not all of which I can immediately recognize by icon. I know it's a minor inconvenience, but having to scroll over an icon to see the name of its associated search engine is pretty annoying after being used to having a nice list that just told you all of their names. Any way that I can change it back to the old list-interface?

    Thank you, much appreciated!

  • I have one icloud account sync with two devices. I made a note on my iphone. Suddenly it lost and all i see is note from my ipad. Is there any way to restore the note? Help me pls. Thanks.

    Please help me as my note from iphone lost when it sync with another device. How can i restore back the note?

    Welcome to the Apple Community.
    The difficulty in restoring iCloud data from a back up is that the back up is older than the current version on iCloud and anything that is restored gets removed again when an iCloud sync occurs. I have previously suggested ways to recover contacts, calendars etc, and other users have confirmed that they work, as such I am making the following suggestions to recover lost notes, but please note, as yet success is unconfirmed ***.
    Recovering your notes is quite time consuming, you may wish not to save all your notes to save some time, if they are not of importance.
    Ensure the device is connected to your local network.
    Start the restore from iCloud back up.
    Allow the devices settings to restore (watch for the confirmation of completion).
    As the apps begin to restore pull the connection to your router WAN port (the one that goes to the telephone point).
    Wait for the time out confirmation.
    Open the 'Notes' app, and open your first note (assuming your deleted notes have now been restored).
    Select the share option at the foot of the screen (rectangle with arrow) and choose mail.
    Send the email to yourself (If they won't send, save them to draft)
    Repeat steps 7 & 8, until you have copied all the notes you wish to save to email.
    Reconnect the router to the internet and let the restore process complete.
    Navigate to settings > iCloud and make sure 'Notes' syncing is enabled.
    Open the 'Notes' app, check that iCloud notes have reverted to how they were before starting the restore.
    Open the 'Mail' app and open the first email you sent yourself and copy the text you want in the note.
    Open the 'Notes' app and create a new note in the iCloud, paste the text you copied.
    Go to iCloud.com on a computer and check that the note has synced to iCloud.
    Repeat steps 12, 13 & 14 until you have recovered all your notes.
    May I suggest that you carry out a back up to iTunes before you try anything, that way should things become even worse, you can at least restore back to where you are now.
    *** As a matter of protocol, anything that I can’t test myself will need to be confirmed by at least 5 individuals before I’m willing to accept it as confirmed. At this time only 2 individuals have confirmed it to work.

  • Is there any way to specify the default version of LabVIEW?

    I have a sinking feeling that the answer to this question is "no."  With more than one version installed, is there any way to set the default LabVIEW version for opening a VI? I have both 7.1 and 8 installed, and usually only use 8 to open an example or look at something posted here.  When I do that, it resets all the OS hooks so that the default action for opening a VI is to open it in version 8.  I've even gone so far as to create actions to open files in 7.1 and 8, but it always resets my default action.
    I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
    Ugh. I hate it when software thinks it knows what I want better than I do.

    eaolson wrote:
    I have a sinking
    feeling that the answer to this question is "no."  With more than
    one version installed, is there any way to set the default LabVIEW
    version for opening a VI? I have both 7.1 and 8 installed, and usually
    only use 8 to open an example or look at something posted here. 
    When I do that, it resets all the OS hooks so that the default action
    for opening a VI is to open it in version 8.  I've even gone so
    far as to create actions to open files in 7.1 and 8, but it always
    resets my default action.
    I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
    Ugh. I hate it when software thinks it knows what I want better than I do.
    Add
    in the LabVIEW.ini file of those versions you do not want to rewrite
    the registry on startup to point to themselves for VI files, the
    following:
    RegisterExtensions=False
    Of course the VersionChooser utility mentioned earlier is even more convinient.
    Rolf Kalbermatter
    Message Edited by rolfk on 06-28-2006 08:21 AM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Any way to restore the ML color coding instead of the tag system in maverick

    do not care for the tag system with maverick is there any way to restore the color tagging of the the entire file name with maverick

    Path Finder, but may not be finally tested with Mavericks. And every update to the operating system has the potential to render third-party Finder replacement solutions inoperable or unstable.

  • Is there any way to change the color of the Firefox 4 menu button away from orange? It attracts my attention and as far as I can tell personas change everything but the menu button color.

    Is there any way to change the color of the Firefox 4 menu button away from orange? It attracts my attention and as far as I can tell personas change everything but the menu button color.

    You can change it with the App Button Color extension - https://addons.mozilla.org/firefox/addon/app-button-color

Maybe you are looking for

  • Schedule a program with JOB_SUBMIT

    Hi Friends, I need to execute a program using function modules JOB_OPEN, JOB_SUBMIT, JOB_CLOSE when ever i executed (i.e; similar to Background scheduling immediatly using SM36, sm37) please help me in the code, i have written a sample program using

  • Unable to hear caller voice on Z10 after upgrade to OS 10.3.1.1565

    Dear Community, I used BB Z10 from Sep last year (Sep.2014) and it was a good phone. But recently, my phone automatically upgrade to newest OS number 10.3.1.1565. I think it is ok with the upgrade. But there is a critical issue happened. I still can

  • How can I get the previous version of Firefox (my Mac has OS X 10.4.11)?

    I have a Mac with OS version 10.4.11 - I need to get an older version of Firefox that is compatible with my operating system. Unfortunately I threw out the older version I had before I discovered that the newest version won't work with my computer. I

  • Any element with JAXB are always empty

    Hi guys! I'm trying to use the any element to specify some content for my web service. My XML schema contains this: <complexType name="casObject">   <sequence>     <element name="type"     type="string"/>     <element name="key"          type="long" 

  • Does the noise come from harddisk or fan?

    Hi all, My powerbook 17'' always has this noise come from left side of the powerbook. I am unable to determine the source of the noise coz I am not sure where is the exact location of the noise. (I read that the fan supposed to be in left side of key