The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB

Dear sir/madam 
I installed exchange server 2013 
my clients want to attache more than 10 MB 
when they attache more than 10 MB they got this massage "The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB"
so how can you help me to increase the attachment size and the way to do that 
how can I change the default 10 MB  
Please can you help me as soon as
Rawa Zangana  

Hi Rawa,
You can use EAC or EMS to set the MaxSendSize. The default value of MaxSendSize is 10 MB.
If you use EAC, here is the steps:
Logon to EAC -> Mail flow -> Receive connectors -> settings-> type the Maximum send message size you want to set
If you use EMS, please use the cmdlet Rajith provided.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Similar Messages

  • The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB: MALAWI .pptx.

    The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB.
    I have had my macbook pro since June and have had no problems sending an email until I have tried to send a presentation today. The above message is what I keep receiving even after using 3 email accounts.

    Email providers often set file size limitations to conserve bandwidth and prevent service overload.  Most common seems to be a limit on the order of 21 MB.  If possible, break your presentation into two parts and send as two messages.

  • Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read"  -DSC8416.NEF  I've been importing the same type of photos with no errors then 2015 came along and now I can

    Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read"  -DSC8416.NEF  I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.

    The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
    Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
    While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.

  • Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them :(

    Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them
    Is was working this morning!

    Depends on your operating system
    Go to google, try typing in
    Change permissions Windows
    or
    Change permissions Mac

  • Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

    LR 5 - using it on a MAC-
    Error message: "the following files were not imported because they could not be read (335).
    I have been working with several forums and have tried all recommendations and none have worked.
    I have tried reloading new LR 5 - and it worked for a short time and then stopped.
    Very frustrated that I cannot talk with someone at Adobe.
    The folks that have made recommendations are great but once their suggestions dont work they drop the link,
    Is there someone or someplace I can take my computer to fix this issue.
    It seems to be a problem between LR and Yosemite.

    The permissions have been changed on the destination folder where the photos are to be copied into.
    You must make sure that the permissions are set to Read and Write.
    Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

  • I get an error message "the following files were not imported because they could not be read (266)..

    I get an error message "the following files were not imprted because they could not be read (266) on Lightroom 4 on my desktop.
    No problems importing the files onto my laptop.  Using a SANDISK card reader and card.  What's going on on the desktop?

    Leanne, check the write pernissions on the folder/drive you are attempting to import into on your desktop. The message usually means "cannot be written" - a not so clear message.

  • LR5 won't import photos Ijust took.  Keeps coming up:"The following files were not imported because they could not be read."  And it's ALL the photos.  never had this problem be4.  what gives?

    Keeps coming up:"The following files were not imported because they could not be read." And it's ALL the photos. never had this problem be4. what gives?  Using an SD card, its a 64GB 600x Speed .  I'm on a Mac 10.8.5; iPhoto has no problem importing them.

    In order to see the windows that show sharing and permissions I gave you above, you have to right click on the the item, e.g. folder, HD, etc., and this window comes up.  Then you right click on "Get Info" and the windows with S/P pop up.  In LR%, if I right click on Destinations folder, this is what comes up:
    There is no option to "Get Info", and if I right click within Destinations folder, this is what comes up:
    Still no "Get Info".  If I click on the specific file (in this case "2015), this is all I get:  Last thought, yesterday out of desperation, I called the Apple store.  I am operating on Mountain Lion operating system, and Yosemite is the latest (as of 10/14).  The manager suggested that if there had been an update in LR5 that was now only compatible with this later system, maybe that was the issue and I should consider updating to Yosemite.  I had no problem downloading photos as of 9/14, but don't think I've done anymore since their update….when was the last LR5 (I'm using LR5.7 currently)?   Do you think this might be the problem with permissions?

  • Why does this happen?--"The following files were not imported because they could not be read." Lightroom will not import ANY files.

    Lightroom cannot read files, yet they can be imported by copying them.

    Jim is correct. This is very likely a permissions problem. If you have checked and are CERTAIN the permissions are correct you should, in this order:
    1.Repair Permissions
    2.Reset your preference file by holding down [Shift][Opt] and Launching Lightroom.

  • The following files were not imported because the files could not be read.(254)

    This is an issue that just happened and I don't know if it is related to the upgrade to 4.3 or not.  Can some one help me with this, please?  This message comes up when I try to import to light room.  A box comes up that says "Import Results" then the error message shows with a group of file numbers that wouldn't import.  I have looked at everything I can think of to remedy this situation but I am not finding any thing.

    Are you importing directly from a card or do you copy the files to your hard disk and then import them from there? I've found that the second method seems to be more reliable.
    Jeff

  • When trying to import photos from a memory card I get error "The following files were not imported because they could not be read.".  When i first installed Lightroom i was able to import from the very same card because there are photos in my library.  I

    Someone please help...I am very annoyed with Lightroom as I have been trying to import photos with no success

    This message means that you don't have permission to write to the destination folder or disk drive. This is an operating system issue that can be resolved by changing permissions. And you can get plenty of information on how to do that by doing a web search for "change disk permissions".

  • When I import photos to lightroom CC I get a message Some import operations were not performed. The following files were not imported because they could not be read.

    Dsc_5122nef  dsc_5123JPG     Everything worked fine for the last week. The only thing changed is I removed lightroom 5. How can I reinstall Lightroom 5

    Its a 100% failure. I was trying to import 37 photos all failed. I can still import into Lightroom 5. I also can import into Lightroom CC on my other Mac.  I tried importing from different cards, my other 7100 and my 5300 same problem. I have tried every combination of card reader, camera and computer I have.  The only only time the message shows up is when I try to import into Lightroom CC on my 27 in Mac. Thanks Art

  • "the following files were not imported because they could not be read"

    I am using windows. This problem just started. Any ideas?

    Hi, southern_ang,
    Novice to novice, I would try just about anything before I would muck around with WRITE settings, since I, as a novice, have absolutely no clue what those are. I would try moving your pictures out of iPhoto. Somewhere in Mac OS, there is a directory called "pictures", just like there is one called "documents". I would take one of your least favorite shots out of iphoto and move it into a picture folder outside of iPhoto. Be sure that the photo still has the .jpg extension, If it works, it works. There is probably an easier solution, but that, it seems to me, again as a novice, requires the least amount of mucking around with computer settings. And, if it works, you know that you should just forget about iPhoto in the future.  I have a Mac, and personally, I never use iPhoto for storage. I just load all of my photos onto an external hard-drive and access them from there. Solves the computer death problem, too.

  • Upgraded to Mavericks and get the following: could not Initialise Photoshop  because of a program error

    Upgraded to Mavericks and get the following: could not Initialise Photoshop  because of a program error
    I have tried all the fix(es) on the web i can find i.e. Trash the Prefs, shift when open and stop plug ins, Download upgraded Java, deleted and re-installed
    My business is at a halt cannot find a fix from Apple

    Did you run the cleaner after uninstalling and before reinstalling?
    -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    AND JUST FOR MAC USERS - Some 10.9.x links
    next link says After Effects, but check YOUR permissions !!!
    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
    -Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -and https://forums.adobe.com/thread/1507936

  • Windows XP could not start because the following file is missing or corrupt - message

    Hi there and apologies in advance if this is a daft or very frequently asked question.
    Upon trying to boot up this Toshiba mini NB200 device last night we got this message:
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.  it then asked me to press r at the forst screen to start a repair if I have the original set up cd.
    The device had to be forced to shutdown previously as it hung when shutting down.
    Now multiple reboots (including uncoupling/recoupling the battery) and resetting the settings from start up menu result in the same error message.
    The device has no cd drive installed but previously Jerry Lippey (in 2011) saved the day by recommending purchase of a product recovery disc (R10804EN) after a 'flashing cursor issue' at logon.
    Has anyone far more clever than I any thoughts (if we're able to borrow a portable cd drive) whether this disc may work again?
    Windows XP was/is preinstalled on the PC (we havent the disc) and we've subsequently added MS Works. A total wipe of the device (as long as XP remains?) wont be too much hassle as we havent any data that we're too bothered about on it.
    Many, many thanks in advance 
    Solved!
    Go to Solution.

    Toshiba NB200-11L
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    Bad news. It means the System hive, which is the most important branch of the registry, is corrupt. Unless you have made provisions for this (we always do on XP systems), the fix is too complex for you to handle (KB307545).
    I'm afraid you'll need to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media as you did before. Do you have important files to rescue?
    -Jerry

  • Hp mini could not start because the following file is missing or corrupt /windows/s​ystem32/ha​l.dll.

    windows could not start because the following file is missing or corrupt <Windows root>\system32\hal.dll.
    then it says please re-install a copy of the above file

    Any system or sys32 and any .dll files missing or corrupted errors, usually the only fix is to reinstall windows and anything on hard drive not saved on removable drives...flash, usb, cd or floppy is lost. I've had several sys32.dll file missing or corrupted errors and asked at Best Buy Geek Squad what the fix would cost and that's how I learned the only fix is installing windows.

Maybe you are looking for