The function "Search" of iCal doesn't find (iMac)

Hello.
Since a few days, the function "Search" inside iCal, on my desktop iMac, doesn't work. I get no answer or 1 or 2 occurences of a name or a word, even if , when checking by myself day by day, I find the item much more than 2 times.
Though, it seems to work on my iPad (sharing the same iCal's database).

Hello michelorl
If the calendars are not performing the way it should, check out the articles below for troubleshooting. If you are not using iCloud, the advanced troubleshooting has some steps for backing up the calendar, exporting and importing them in to see if any change happen.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
iCloud: Advanced Calendar and iCal troubleshooting
http://support.apple.com/kb/TS4337
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

  • 2007 Intel Imac, installed a new Hdd. Started up with the install disc but it doesn't find my Hdd when asking for a destination volume to install the Mac OS.  The Hdd is recognized in system profiler. Any ideas?

    2007 Intel Imac, installed a new Hdd. Started up with the install disc but it doesn't find my Hdd when asking for a destination volume to install the Mac OS.  The Hdd is recognized in system profiler. Any ideas?

    Welcome to Apple Support Communities
    The hard drive is not formatted, and it must be formatted in "Mac OS Extended (Journaled)" in order to install OS X.
    Close the OS X installer, and go to Utilities menu (on the menu bar) > Disk Utility. Then, format your hard drive in "Mac OS Extended (Journaled)" as Format > http://pondini.org/OSX/DU1.html Finally, close Disk Utility and install OS X

  • Search in Mail doesn't find simple words in message subject - why?

    I've not found Mail's search tool to be very useful.
    Searching for "Itinerary" does NOT find my flight itineraries in the Gmail mailbox. However putting a space in front of the word, as in " Itinerary" will find the messages I'm looking for. It is nice to have stumbled upon this work around to some poor algorithm or bad regular-expression used in the search function. However I'd rather not have to out smart the tool to get what I'm looking for.
    Do other's see this behavior?
    It it an interaction with Gmail & Apple mail?
    Is it a misconfigured setting somewhere?
    Can I fix this some how?

    Do other's see this behavior?
    Used to see it back in Leopard as I recall. Working great these days.
    You might try forcing Spotlight to reindex...drag the directory that contains your mail data into the Spotlight exclude list, and then back out. Then wait for Spotlight to finish crawling...it is busy when you see a small dot in the center of the spotlight icon, top right.

  • Search in ical doesn't work

    I am using 10.7.4 and my iCal search doesn't work. When I type in a search term, the results pane is blank.
    Help, please.

    Brentbin,
    Notice other posts, but where's the fix?
    What have you tried?
    Have you tried to...quit iCal, open System Preferences>Spotlight>Privacy, and add your Macintosh HD to the list?
    Wait a couple of minutes, and then remove your Macintosh HD from the Privacy list. You should notice (after a short delay) that Spotlight is reindexing your HD. After Spotlight completes the index, open iCal and see if your search works.
    ;~)

  • HT204387 I have third party bluetooth that used to work perfectly with IOS 6.1 but now I install IOS 7 and now some of the function on my bluetooth doesn't work.

    I like to know anyone having problems with bluetooth functions with new IOS 7 ?

    I have the same problem with my iPhone4 connected to my VW car via bluetooth. In the previous version of iOS I could start and stop and change tracks in for example Spoitify with my steering wheel buttons but now with iOS 7 it doesn't work anymore.... Apple please correct this ASAP...

  • Refnum out: where to find it on the function/c​ontrol palette?

    Refer pic. Refnum out looks like a dummy variable to paste to the shift register so the register would not be empty, am I right?
    But I searched on the function/control palette, I can't find refnum out, where is it?
    Solved!
    Go to Solution.
    Attachments:
    refnum out vi.vi ‏16 KB

    I don't know that there is an empty "file refnum out" constant, but it can be created in a couple of ways, the first being right clicking on a file function that creates a refnum and doing a "Create constant" another is clicking on an existing refnum wire, or in your case structure instance, the  terminal unconnected in this case and doing the same (essentially the same thing as the first), and a third is dropping a byte stream refnum control on the FP, going to diagram and right clicking it an "change to constant". All are a couple more keystrokes/mouse clicks from just pulling it from the pallete.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • How do I disable the "Quick Search" feature?

    I don't need or want the Quick Search function on Firefox. Simply deleting the Quick Search bookmarks folder doesn't get rid of it because it automatically reappears as soon as I restart Firefox. How do I disable this feature altogether?

    Here's what worked for me.
    Right click in the toolbar area to get the toolbar customization menu. That is, right click just to the right of the "Help" button on the Menu Bar.
    You'll see:
    Menu Bar,
    Navigation Toolbar,
    Bookmarks Toolbar
    These three may or may not have check marks, but you want to click on the fourth item, below the line, "customize".
    Left click the customize button and the "customize toolbar" window appears. Click and hold the "quick search" and drag it into the customize window and release. Quick search should settle itself into the customize toolbar window, patiently waiting if you ever decide you might want it again. : )
    L. Smith
    screen captures by SnagIt

  • ICal doesn't recognize Outlook invitess and Hotmail doesn't recognize iCal

    When I receive invitations from someone using Google calender, things seem to work great but when i get an invite from someone using Outlook, the .ics file shows up in the e-mail but not in iCal notifications, Wouldn't be a big deal but when the appointment gets moved, iCal doesn't recognize the change so I have to keep hunting down the original appointment, delete it and then drag and drop the new one. Rather a ridiculous pain.
    And, when I send an invitation to a client using Hotmail, there is nothing for him to open or accept.
    Help!

    When I receive invitations from someone using Google calender, things seem to work great but when i get an invite from someone using Outlook, the .ics file shows up in the e-mail but not in iCal notifications, Wouldn't be a big deal but when the appointment gets moved, iCal doesn't recognize the change so I have to keep hunting down the original appointment, delete it and then drag and drop the new one. Rather a ridiculous pain.
    And, when I send an invitation to a client using Hotmail, there is nothing for him to open or accept.
    Help!

  • Documentation of the function module RSC1_ZDD_REPLAY_SET

    I am looking for the documentation of the function module RSC1_ZDD_REPLAY_SET but could not find it in any language.
    I am not a ABAP person so I am not familiar with ABAP, but I want to know what this functiond module does so I tried to look for a documentation, but could not.
    Does anyone have any information on this function module?
    Thanks.

    Thanks for the document.
    I think this is what I was looking for.
    So, the function module is used to transfer the monitor information that was collected in the mirror system in the scenario of to minimize the downtime for delta initialization.
    Even though it is an old document, it looks like that this is also applicable to the BW release greater than 2.0B.
    Thanks so much.

  • "dba_extents" doesn't find just created segment... Why ?

    Hello,
    below you can see a sequence of commands and queries from my operating system and SQLPLUS promts. The question is : Why "dba_extents" doesn't find just created "newtab" table ???
    syspath>sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Mar Apr 9 15:36:12 2013
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> create table hr.newtab(c1 date);
    Table created.
    SQL> select tablespace_name, file_id, extent_id, block_id, blocks, bytes from dba_extents where lower(owner)='hr' and lower(segment_name)='newtab';
    no rows selected_
    SQL> exit
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    syspath>sqlplus hr/hr@orcl11g
    SQL*Plus: Release 11.2.0.1.0 Production on Mar Apr 9 15:39:13 2013
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> select * from newtab;
    no rows selected
    SQL>
    -----

    998982 wrote:
    Hello,
    below you can see a sequence of commands and queries from my operating system and SQLPLUS promts. The question is : Why "dba_extents" doesn't find just created "newtab" table ???
    syspath>sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Mar Apr 9 15:36:12 2013
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> create table hr.newtab(c1 date);
    Table created.
    SQL> select tablespace_name, file_id, extent_id, block_id, blocks, bytes from dba_extents where lower(owner)='hr' and lower(segment_name)='newtab';
    no rows selected_
    SQL> exit
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    syspath>sqlplus hr/hr@orcl11g
    SQL*Plus: Release 11.2.0.1.0 Production on Mar Apr 9 15:39:13 2013
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> select * from newtab;
    no rows selected
    SQL>
    -----because no segment was created.
    http://tkyte.blogspot.com/2011/02/deferred-segment-creation.html

  • Indesign CC doesn't find and highlight links when trying to relink!!

    I was so excited to see all the customizable options in my new InDesign CC, until I tried to relink a file from the links palette and CC doesn't find and highlight the file anymore like it used to do with 4 and 5!!
    As a prepress operator dealing with hundreds of clients and manipulating files all day long, this feature was a great blessing.
    Hope it's just a glitch and somebody is fixing it or I'll have to go back to 5

    I have been using InDesign 2, 3, 4, 5 and 5.5 with all OSX up to 10.6.8 and always had that feature. Some say the problem is Lion, some say is InDesign 6 and up. I'm back to 5.5 anyway because CC is way too slow with my old Mac G5.

  • ITunes doesn't find Airtunes when connected with cable, only WiFi

    I have an Apple TV with Airtunes enabled. But apparantly, it's not possible to connect to it from PC's who are connected to LAN with cable instead of WiFI? Does anyone know why?
    More details:
    I have 3 PC's:
    PC 1: , Windows 7 64-bit with iTunes 9.1.1.12 (latest)
    Stationary, connected to LAN using cable in a Gigabit switch
    PC 2: 100% fresh install of Windows 7 32-bit and iTunes 9.1.1.12
    Stationary, connected to LAN using cable in a Gigabit switch
    PC 3: Win 7 32-bit with iTunes 9.1.1.12
    Netbook - connected through WiFi
    Apple TV device (latest firmware) is connected to same LAN using cable as well. *All PC's can ping the Apple TV without problems.*
    So the problem is that iTunes doesn't find the Airtunes device (the output dropdown selector doesn't show up). I first tried on my main PC (PC1). It didn't work, so i tested on PC2 (wich is a fresh install of both OS and iTunes!), but same problem there.
    But then the weird thing happened. I tried to install on my netbook, and it worked! Only difference is that the netbook was connected through WiFi. I don't see why that would matter, but just for fun i tested to disconnect WiFi, and connect with cable and boom - airtunes selection dissappeared! As soon as I disconnected the cable and reconnected WiFi, it appeared again.
    Why on earth would Airtunes only work on WiFi? As you can see on this screenshot, network configuration is equal on Wifi and cabled connection. (Apple TV has IP 10.0.1.30)

    It's supposed to be able to cope with slightly different file & folder structures, missing track numbers, all tracks in just an artist folder, everything in Unknown Artist\Unknown Album etc. Details here. Can you give me an idea of how things are set out? Maybe it needs a little tweak to cope with the way you've done things, or we could use something like MediaMonkey to reorganize what you have into something the script can work with.
    I'm going to be out for much of the day but I'll look in on this thread later.
    tt2

  • Where is the function?dreamweaver.showDynamicDataDialog

    I want to modify the
    function----------dreamweaver.showDynamicDataDialog
    How can I find it?
    I hope use it in a html file,but is only useful in xsl
    file

    hello~hello test,anybody hears me?

  • I have a blank page with only the Google search on it. Just dnloaded Firefox.

    Just downloaded Firefox. When clik on desktop icon - the page comes up blank with only the Google search space. Doesn't FF have news, email etc?? Thanks

    If you want a different Homepage, you can change it.
    http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    RSS Feeds are under Latest Headlines. Firefox doesn't do email.
    http://www.mozillamessaging.com/en-US/thunderbird/

  • The "Search" function box doesn't find things that are there! Why?!

    The "Search" function box doesn't find things that are there! Why? Eg: It doesnt show all my Sent and Received emails, but it will find an email that I half wrote and deleted. Unsure why or how to explain more fully.
    I also don't understand if I type in "James email" or "J" into the search box and all the J / James stuff appears but it doesn't show the emails I know have been sent and I know are somewhere because I rang "James" up to check, but the search box shows random thing I am NOT looking for, even if I type in fully what I am looking for and test it by typing in full titles of things.
    It also doesn't store all my sent emails in "Sent" box. Confused! I'm not sure if the "Search" box just isn't up to the job or if it is broken / i'm doing something wrong? Maybe the email address I use isn't set up properly?

    This can happen sometimes if the cache is not cleared correctly when items are not deleted from your device.
    The only solution to this is to do a restore to clean out the cache file.

Maybe you are looking for

  • Itunes 7.1 deleted all movies and tv shows from ipod!

    Just updated Itunes to 7.1 - and found out too late that both movies and tv shows were suddenly unchecked for the sync. I've always had them on auto sync before this and did not change any settings. So when I synched for the first time with 7.1, I lo

  • Wired & Wireless UK Network Set-up - Appreciate your views/advice?

    Hi Firstly, apologies if this isn't the right question for this forum. As it's re networking and I use an AE I hope this is right! I have a succesfuly workng wireless connection at home which is based on a D-Link DSL 300T ADSL Modem which has a phone

  • Dynamic Configuration JMS

    Hi, i am trying to use dynamic configuration variable DCJMSMessageQueue as a condition for determining the receiver within the Receiver Determiniation. I can see the value in the DCJMSMessageQueue, but the condition is not applied. Have anyone tried

  • How to copy only bookmarks from firefox on old PC to firefox on new PC without loosing any bookmarks; that is Do Not overwrite bookmarks on new PC?

    I am phasing in use of my new laptop from my old laptop; running Firefox on both. I want to copy all of my bookmarks '''only ''' from my old laptop to my new laptop without deleting/loosing/overwriting bookmarks already set on my new laptop. Your hel

  • Query's log viewer

    Hello, I'm trying from inside session management to view query's log but I get this Error Log Could Not Be Retrieved Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC State: HY000. Code: 10058. [NQODBC] [SQL