The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do?
The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do? I just bought my iPhone yesterday and i can't update my software from 5.0 version 9A334) to 5.0.1 because the firmware(1.0.11) is not compatible.
dear friends
im experiencing the same problem rite now. i just bought a 4s for my wife yesterday. when i tried updating the ios to 1.0.5 directly from the phone, it showed - 'Unable to Check for Update. An error occured while checking for a software update. and when i tried updating it via itunes, i got this msg - The iPhone "xxx iphone" could not be updated because the firmware file is not compatible.
my internet connection is perfectly ok here. can anybody help me on this?
Thank you
Similar Messages
-
so i just updated my iPhone 4 to the iOS 7 but now the screen on my phone is saying "Could Not Activate Phone" So what should I do i need this fixed now
Can someone please tell me what to do. I need for something in 30 minutes
-
i've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.
i do not know what this means. I purchased the phone brand new two years ago and have never had any problems with it. The message i am getting reads:
"your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes (which i don't have) to activate it, or try again over cellular connection in a couple minutes. (which i have tried several times with no success) you can also try to activate using wi-fi connection (which i do not have). if this problem persists, contact apple support at apple.com/support." -
As an absolute newcomer to Lightroom 5 I have downloaded images direct from camera (IOlympus EM-1) and divided them into folders. When I go into Develop mode, some folders can be developed ok , but with images from two other folders I get the message "This file could not be found". What should I do?
may i suggest opening the files in Olymous Viewer 3 and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files
The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
. The tiff files just LOOK better in LR after the conversion . there is a youtube on this subject and when i tried it myself i was impressed -
Why everytime when i try to download iTunes it says " there is a problem with this Windows Installer package. A program required for this install to complete could not be wrong". What should i do to download it?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
The pop up that comes up as soon as i plug my iphone into my mac is 'itunes could not connect to this iphone. could not allocate resource" what should i do?
HOW TO FIX CANNOT ALLOCATE A RESOURCE ERROR!!!
I found a fix that worked for me after failing with all the others:
IF your computer has an old cydia app called Wi-Fi Sync (you'll recognize it on your toolbar as a black silhouette of an iphone that NEVER goes away), then this is probably your main culprit. Simple fix.
1. Goto your hard drive in the finder
2. Goto Library
3. Goto Launch Daemons
4. Throw this in the trash: com.ghughes.wifisync.root.plist
5. Goto Library
6. Goto Application Support
7. Throw this in the trash: Wi-Fi Sync (it's an entire folder).
8. Restart.
9. Thank me.
Peace and Love, Peace and LOVE! -
I have tried uninstalling and deleting all components and reinstalling.The message error still appears.
To resolve this please reinstall Firefox 3.6.8
-
My iphone 5s and model A1457 and even after i downloaded the IOS 7.1,2 itunes get me error "the iphone could not be updated because the firmware file is not compatible"
some people saying that u cant get back and other saying yes u can
i wonder if i still can and how to avoid that error
IOS 8 Drain battery like **** -.-" & wireless not working well -.-", that's so annoying ...
(if someone got a solution, i would appreciate it, Thx in advance)You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing! -
Just registered iphone 4s and attempted to run the first update to 5.0.1...message "could not be updated because the firmware file is not compatible." What needs to be done?
Check out this article, especially #4: Security Settings: http://support.apple.com/kb/TS1275
-
i was trying to update my iphone 3gs ios but in iphone it is saying that iphone could not be activated because the activation server is temporarily unavialable so now what should i do now plz help mee
usually that means the iPhone was hacked to unlock it from the original carrier
-
Iphone can not be updated because the firware file is mot compatible...
This is the message i have received when I wantted to update my Phone 4...any clues?
Thank you!Try a manual install, as outlined in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
can't restore my iphone 3g, becouse this error: iphone could not be restored because the firmware file is not compatibe
To make things wors yesterday iphone was stoped i shutdown it and when i try to turn On the apple appears for a 30 sec then disappear... and again apple appears and for 30 sec disappear...So to fix this problem i need to do restore but i cant becouse i get the error.
Message was edited by: liskanThe error message you are getting sounds like you have jailbroken your iPhone or have updated to iPhone OS 4.0 Beta.
Eitherway, I would follow http://support.apple.com/kb/ts1275 for a possible solution as these steps may not work. -
HT201210 could not be updated because the firmware file is not compatible
trying to update iPhone 4 so blue tooth may work in the car.
Version 4.3.5 ( 8L1 ) displayed under about.
Moden Firmware is 04.10.01
Any help would be appreciated.
could not be updated because the firmware file is not compatible appears after waiting 70 min for my computer to down load OS 5.1?Do you have iTunes 10.6.3?
If not, update iTunes first then try again. -
i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i doHello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.
Maybe you are looking for
-
IPhone 4S (iOS 6) no longer syncing with iTunes
Hi, this is my first post on Apple Support. I have several questions that I hope someone will be able to answer. Some regarding my iPhone, and some regarding my MBP. For starters, my iPhone 4S is running on iOS 6, and no longer syncs with iTunes. I a
-
Dbms_lob.getlength() returns different values
Hi ! I am not a developer.. So, possibly cannot answer developer specific question. We have two instances running on 10.2.0.4 but both giving different value for declare xml varchar2(32676) := 'SELECT XT_STRATEGY, ACCT_DESCRIPTION,sum(MON_PL) PL
-
EEWB enhancement -Zfields not visible in Customer Fields in CRM online
Hi there, I've run an EEWB enhancement to add some new fields to Service Process - it seemed to work correctly and the fields have been correctly added to BTADMIN_H. I was also able to add them to WebUI screens (as was the requirement) and they funct
-
Surveys for particular target Group
Hi All, I am attempting to create a survey for a specific target group. To do this I am using the SURVEY transaction. In the SAP documentation after creating the survey and Inserting a new question, it states to click on TRANSFER. This should allow
-
Color Coding not Coloring the Code
Hello All, I am using Dreamweaver CS3 on a Mac and for some reason, when I set the Color Coding in my preferences, it will not show in my document. I tried saving the document and double checked if I actually had the document set to php and no luck.