"The iPod cannot be updated. The disc could not be read from or written to"

What do I do?!?! I sent back the first one coz there was a gap in the click wheel and it was possible to get the photos onto my iPod. Now...not so much.

Welcome to Apple Discussions!
See this...
Disk Cannot Be Read or Written to error when syncing iPod
btabz

Similar Messages

I firewired I-tunes music from crashed I-mac to a new I-mac. Then tried to sync my I-pod w/ the new computer and got messages "I-pod cannot be synced". Also, "the disc could not be read from or written to- you don't have the privilege to make changes"

I firewired my i-tunes library from my old computer to a used I-mac which I bought. All purchased songs & playlists
were succesfully transferred. When I tried to sync my empty I-pod to the used I-mac I received these messages.
          - I-pod cannot be synced
          - The disc could not be read from or written to
          - You dont have the priveledge to make changes.
This is all my music legally downloaded and purchased from I-tunes. How to I circumvent this barrier?
                     Thanks, jaime

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

HT1449 Help! This all runs quite smoothly until i get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!

Help! This all runs quite smoothly until I get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!

I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.

"The disc could not be read from or written to"

I have a 80G Classic and when I tryed to sync it with iTunes for the first time I got this message "Attempting to copy the disc Classic (iPod) failed. The disc could not be read from or written to. I have restored and rebooted the iPod and the Mac. When I synced it again it synced for a while and put one album plus calendar and contacts on the iPod, then the same massaged appeared and the sync stopped. Any ideas please?

See if this troubleshooting article helps.
Disk cannot be read from or written to error syncing iPod in iTunes.

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

The attempt to burn a disc failed. The disc could not be read from or written to.

I am trying to burn a cd after upgrading to itunes 12 and this message keeps coming up."The attempt to burn a disc failed. The disc could not be read from or written to." there is no problem with my hardware since I can burn cds using nero. Please help. Thanks

Here is a solution that worked for me!
1. Uninstall iTunes 12
2. Download and install iTunes 11.4
3. Run iTunes 11.4. You will get a message that the library was created by a newer version. Just dismiss the message.
4. Uninstall iTunes 11.4
5. Install iTunes 12.0.1 again. This time disc burning should be working.
(The prior installation of 11.4 fixes the issue)
I hope this works for you as well
Note
My iTunes 12.0.1 installation was a fresh one to start with. I am using the x64 version on Windows 8.1 x64.

The ipod cannot be synced. this disk could not be read from or written to..

this is the message that appeared when i tried putting songs on my shuffle..what should i do?

I had this same issue and stumbled across this solution on a random web sales site for second gen shuffles.
"It is ESSENTIAL that when you first sync the shuffle you enable disk use via the option in iTunes. This prevents iTunes from automatically disconnecting the shuffle. If you do not do this, the shuffle is disconnected automatically as soon as you plug it in, which means you are unable to update it. You will get the messages "Unknown error: Device cannot be read from or written to" which is displayed because the iPod has been disconnected although iTunes doesn't' realise it has disconnected it. iTunes will then freeze and you will be unable to reset the iPod or enable disk use. So make sure you enable Disk Use the very first time you plug in your shuffle! Otherwise you will have to manually reformat the Shuffle"
So I downloaded the ipod restore utillity to reset the ipod to factory defaults. I then ran itunes, gave the ipod a name and let it autofill to give me time to change settings in the ipods setting tab in itunes. Down the bottom of this tab I ticked the checkbox to allow ipod disk use and clicked the apply button and all is working fine now. If the ipod completes synching before you click the apply button then you will need to reset the ipod and try again.
Hope this helps.
Windows XP Pro

Error:the ipod cannot be updated. the disc could not be read from or writte

May sound silly I am sorry, new to this. Just got an ipod shuffle and have gone through all troubleshooting suggestions ie: restore ipod, reinstall software etc. Am getting an error: "The ipod "administrator's ipod" cannot be updated. The disc could not be read from or written to". This occurs when I click and drag a playlist from the source section to my ipod in the source section. Getting a wee bit discouraged by reading all the problems associated with this ipod and am hoping for an easy fix to slide past further frustration. Please help. Thank you muchly.
Windows XP

Go to the iPod Shuffle Support Page, look around in there, and follow the troubleshooting steps in the article entitled "Can't be written to" or words to that effect.

"Disc could not be read from or written to." ?? :S

My computer died about 3 months ago for reasons beyond me so I got it fixed, i've finally bothered to download itunes again & it says "the iPod "Hayley's beast" cannot be synced. The disc could not be read from or written to."
I'm quite happy for it to just wipe my ipod so I can start again but it wont even connect. Then when I go to put music on it the same thing comes up. ummmmmmmm.
Help?

Welcome to AD!
Does it do anything differently if you reset that iPod while it's connected to your PC?
http://support.apple.com/kb/HT1320

Error Message 'Disc could not be read from or written to' HELP!!!!!

I'm a novice at all this, so any sympathetic help would be really welcome. I have downloaded the uptodate iPod and iTunes updates but I still keep getting the failure message ' Attemting to copy to iPod failed. the disc could not be read from or written to.' It is downloading some music, on occasions, but not all. What is wrong? Is my iPod faulty? Any help would be welcome.

Thanks Jeff. Only thing that rings true is updating OS; when I tried to downoad 10.4 message said I 'could not on this computer'. Since I purchased and installed 10.3 a year ago I don't understand. Also, iPod was downloading perfectly until two days ago when -36 appeared. Bummer. I am not a techie, Apple tech support does not have a clue, and iPod is useless. Ideas?

Error: This disc could not be read from or written to....

Hi,
Just got a new ipod video 30g. When transferring songs, fails after a while....transfers some songs then this error pops up:
"Attempting to copy to the disk 'Joe's Ipod'failed. The disc could not be read from or written to."
I've searched this in the help section and this page comes up:
http://docs.info.apple.com/article.html?artnum=301267
But my computer software is very minimal..and Windows XP is up to date. Cords appear fine and not loose...
HAVE NO IDEA What the problem is. I've tried restoring it to original settings. I've even reinstalled iTunes...
Anyone know what to do?
Is my iPod just faulty?
Ipod video 30g Windows XP
Windows XP

Hey there,
Have you tried any of the troubleshooting techniques from below? Check it out. Hope it helps.
http://support.apple.com/kb/HT1207
B-rock

The ipod cannot be synched. the disk could not be read from or written to?

So I've done everything possible to try to get my touch to sync all my songs from my itunes library at once and nothing is working. So sadly i spent the entire day plugging and unpluggin the usb cord because at most i could put 30 songs on my touch before it came up with the error "the ipod cannot be synched. The disk could not be read from or written to." this is very frustrating as i have many videos i purchased on itunes with anticipation of putting them on my touch but if i try to do so at most it downloads half then it pops up with the same error. If anyone of y'all can help, that would be greatly appreciated i'm slowly but surely giving up on the touch all together even though i love it this error to it is very time consuming and annoying.

Same problem. With an iPod Touch.
This began after I accidently pulled out the USB before it was fully ejected. (I hit eject, and the icon vanished from iTunes, so I THOUGHT I was okay...) But I got the error. And since then, I've got the error you speak of. Mine may be a tad off.
When I drag a song from iTunes or the Finder into the iPod it copies fine but then the error pops up.
But now it's fixed, and I'm not sure why. And I'm hoping it doesn't come back.
I remember I went into the iPod Touch itself. Went to...
Settings > General > Reset > Reset All Settings
After that, I got back to the window from iTunes asking if I want to manually manage songs. I unchecked the box next to the choice of letting iTunes do it automatically.
But Even after that, I had the synching problem.
So I went into the main iPod Touch tab in iTunes. Under options the "Manually manage music and videos" box WAS CHECKED. I decided to uncheck it. Maybe the iPod was observing 'Opposite Day'. I know my cellphone does. On my cellphone, when I choose to play videos without sound, it plays WITH sound. So, I dunno...
Anyway, after I UNCHECKED "Manually manage music and videos" I ejected the iPod and reconnected it. And I plugged the USB into another port. Guess what? It didn't automatically synch. And when I added music on my own from either iTunes or the Finder, it worked well too. The weirdest thing... when I went to have a look at the box next to "Manually manage music and videos" - it had been checked again, without my doing.
UPDATE: And as I began typing that last sentence - THE ERROR CAME BACK. So.. NEVERMIND! I'm still stuck and angry!
*UPDATE II:* The error happened again after a song I was listing to in iTunes from the Touch ended. Once it ended, the error popped up and music stopped playing. I tried dragging a new song from iTunes into the Touch and it wouldn't let me. I unplugged and then plugged the iPod back in, and dragged songs again. So far it works... SO FAR. So far no errors. I tried deleting a song from the Touch and also no problem.
*UPDATE III:* I did a test. I added album artwork to songs that had none, already inside my Touch. It took a bit longer than it would have on my computer, but all tracks on the album got the art work, and the error message has yet to display since I did so.
*UPDATE IV* I've only been adding up to 10 songs at a time, worried that it would freeze. This time I added 31 songs, and they all imported - no error messages. Currently I'm worried that if I play a song from my Touch through iTunes the message will return. I'm too afraid to do it deliberately. I know I was able to do so with no problem with my 2nd Gen 10GB iPod I've had for years. That was working with my computer as of 3 days ago!
Message was edited by: Daniel Brown

..cannnot be updated. The disk could not be read from or written to.

'The ipod "moose" cannnot be updated. The disk could not be read from or written to.'
This is what I get when I try to update the music on my ipod nano.
I have tried changing it from automatically update all songs and playlists to Automatically update selected playlists and made a playlist with music from my library to go on it but that wouldn't work either.
I had music on it before and now its all been wiped.
Help would be great, thanks <3<br>

Welcome to Apple Discussions, frozenpeas!
I don't know what the person above did to fix it, though there is an Apple Support article about that same issue:
"Disk cannot be read from or written to" when syncing iPod
Check out the things in that document. Post back, and I'll get back to you.

The iPad "My iPad" cannot be synced. The disk could not be read from or written to.

Since updating iTunes to 10.5 (running on OS X 10.6.8) I get this error message at the end of syncing for 2 different iPhones and an iPad 2:
The iPad "My iPad" cannot be synced. The disk could not be read from or written to.
Everything was fine before, and the sync seems to still be happening. The disk is actually readable and writable, and not full. The ~/Library/Application Support/MobileSync/Backup folder write date is getting updated.
The system log says:
Oct 28 21:29:45 Home-Mac iTunesHelper[399]: _AMDDeviceAttachedCallbackv3 (thread 0x7fff70182cc0): Device 'AMDevice 0x10022aa60 {UDID = 1a75e9685b623865acad0792f078ac9000608044, device ID = 4, location ID = 0xfa400000, product ID = 0x129f}' attached.
Oct 28 21:29:45 Home-Mac iTunes[396]: _AMDDeviceAttachedCallbackv3 (thread 0xb0839000): Device 'AMDevice 0x3340390 {UDID = 1a75e9685b623865acad0792f078ac9000608044, device ID = 4, location ID = 0xfa400000, product ID = 0x129f}' attached.
Oct 28 21:30:05 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: 2011-10-28 21:30:05.557 AppleMobileBackup[6494:903] WARNING: Backing up 1a75e9685b623865acad0792f078ac9000608044
Oct 28 21:31:52 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Child with pid 6494 exited normally
Oct 28 21:54:37 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Waiter has started running...
Oct 28 21:54:37 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Waiter is done running
Oct 28 22:26:11 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Waiter has started running...
Oct 28 22:26:11 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Waiter is done running
Oct 28 22:26:11 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Child with pid 6668 exited normally
Is this anything to worry about?
--Scott

I am having the same problem with an older black and white 40 gig ipod. I had a new hard drive installed and using my Power Mac G5 running 10.4.9, where I keep the music library, I am unable to install more than 2 gigs of music. I have done the restore and it does not help. I get the same error message everytime. I was successful in syncing a new 80 gig minutes later!
Any suggestions?

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

"The iPod cannot be updated. The disc could not be read from or written to"

Similar Messages

Maybe you are looking for