The keyboard of my computer doesn't work
**** apple community, i have a very serius problem with my macbook.
Today, i iniciated my computer to start working as usual, but i discovered that my computer do not recognize the keyboard or the trackapd that are attached to it. These are not external devices, they are built in my computer. Also, my macbook tells me that she can not find a bluetooth keyboard/mouse. My Macbook is normal macbook model mid 2009, with OS X (Lion) 10.7.5.
Does anybody know how to fix this?
Thank you for your attention.
So who you're talking to here is a peer to peer network of Apple users.
That said if your keyboard was failing, the power button is integrated into the circuit of the keyboard itself. So it wouldn't be surprising that the power button circuit would fail as well over time.
Normally a repair depot will replace the entire upper case and that's what's probably so expensive. However your Apple store should be able to preform a "Depot Repair" which would be a flat $300.
It is possible to buy a new keyboard for around $30 (Price for a 2011 13".) but the replacement is massively labor intensive. Everything has to come out of the MBP, the keyboard back light has to be carefully peeled away. There are over 80 #0000 Phillips screws that have to come out, the new keyboard carefully fitted and 80 screws put back.
Don't hold me to the 80 screws, I did try to count them but gave up and the count appears different depending on the keyboard.
I've done 3 so far!
Similar Messages
-
I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?
Plz answer as soon as possible
-
Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.
This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording) -
I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?
Hi!
I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard. -
Getting rpm values from the fans on the MSI NEO2-FIR motherboard doesn't work
I currently have 6 Noctua NF-S12-1200 120mm fans spinning in my computer but i am unable to get rpm values from them except the cpu-fan. It doesn't work to get a readout from the others with either, BIOS, Dual Core Center or Speedfan. Regarding Speedfan is it true it don't support the SuperIO Chip on the Neo2, the FINTEK F71882F? It's not currently listed in their supported temperature sensors list.
So whats the problem? Shouldn't atleast DualCore Center atleast show the rpm's from the other chassis fans?
Or the fans don't support sensor readings?
Thanks!Quote from: Jack on 13-October-10, 00:15:36
Well, there is nothing that can be done about. SysFAN 1 & 4 support sensor readings, #2,#3 and #5 don't. You can also see that in BIOS Setup. #1 are the only ones that show up there (H/W Monitor section). This is not a malfunction or a bug. You have to live with no fan sensor readings or be creative about the wiring.
The problem is that i use the UNLA cables from Noctua which half the speed of the NF-S12 fans i run with. And it blocks the rpm readouts in Speedfan and BIOS.
http://www.noctua.at/main.php?show=productview&products_id=5&lng=en
Strange thing is that the CPU fan reads fine with the ULNA cable attached but the SYSFANS will not read the rpm with the ULNA cables.
What is wrong? -
How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work
It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
Go to DISK UTILITY
Choose the Hard Disk you intended
ERASE
You can choose either
(I personally prefer this one, you know just in case) -
Hello, I have purchased Adobe Design Premium CS5 with Acrobat Professional 9.0 with Win License in 2010. Last month, the software is deactivated and asked me to reinstall it, however, the serial number I have doesn't work anymore. The computer is still the same, operation system is also the same. Something must be wrong with ADOBE. Can you help to resolve? Or direct me to a right person and number? Thanks!
I tried, the Design CS5 worked that way, but not the acrobat pro. 9.0. I will update with what I was suggested to download again from Adobe volume licensing site. Since my computer is at my work. This is the site I was referred to: Adobe Licensing Website | Serial numbers | Orders | Accounts
-
my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID. I have tried to copy and paste in the browser window, but that doesn't work either.
Have you tried accessing the email from another computer, device, email client or web browser?
-
My MacBook's keyboard and track pad doesn't work property.
My MacBook's keyboard and track pad doesn't work property after update to snow leopard. It's work fine while still using is 10.4. Please help me!
Try Resetting the System Management Controller (SMC)
-
My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?
Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings -
I am from Brazil, and i have an iphone 5. Since it was purchased the 3G/4G data signal doesn't work. I made contact with people in Apple from Brazil and they told me I had to ask for your support to unlock the 3G/4G data signal. How do I have to proceed to unlock this feature in my iphone?
I would appreciate if you can help me.
Thanks!Greetings alex.bonifacio! I'm very sorry that you're having connection problems with your iPhone 5. While would love to help in any way I can, the device must at least be on an active line of service with Verizon Wireless in order for me to be able to make any changes. I must therefore urge you to contact your local wireless carrier for your equipment options. Good luck and thanks!
DionM_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Hello everybody,
I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
Thanks in advance for your answer.
YanHello Chris,
Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
Thanks for answering so fast.
Bye.
Yan -
My new iPad air is asking for a pass code. I have only just finished restoring it via iTunes from my ipad2 and I didn't set one. The one I used before doesn't work. What can I do?
http://support.apple.com/kb/HT1212
-
The geo-fence in Reminders doesn't work on my 4S since ios7.
The geo-fence in Reminders doesn't work on my 4S since ios7. Any reminders I put in as remind me at a location do not work. Location services are turned on. Maps work fine & show my location. Reminders are turned on in location services & I see the symbol for the geo-fence in settings, but not at the top of my home screen. This always worked fine with ios6.
Try swiping down with two fingers. This solved my problem.
Maybe you are looking for
-
I am unable to update any add-ons at all. Every time I try and install an add-on or even the new "show hidden add-ons" add-on, I get a server error. How do I fix this?
-
IMac G5 Intel Early model 10.4.4 will not shut down
I have just replaced the internal HDD due to hardware failure in my iMac g5 (Intel early model) reinstalled the OS, applied all updates successfully. Problem is the machine WILL NOT SHUT DOWN. If I chose shut down, it will only restart! (As it does i
-
Date interval should be there in name of the report through Bex
Hi, I have a requirement in which customer wants to see the date interval with the name of the report which they are using in selection screen. Can anyone please tell me how i can do it in BEx query. Roma
-
Firefox 6 - Typing Slows to unusable speed in many sites including gmail
Wasn't a problem with Firefoox 3, upgraded to 5 and now many sites including gmail, the typing is reduced to unusable speeds with big pauses. Throughout. I've done complete re-install from scratch and it's still a problem. If I start in safe mode it
-
Some browsers showing divs in front of others
The tabsh div and navbar div should always be shown behind the other divs. FOr some reason in the following browsers/os it is shown in front. How can I change this? Thanks a lot: Opera 7.54u2 Windows XP Opera 8.5.0 Windows XP Opera 7.23 Windows 2000