The language selection screen just comes up over and over again.  I'M FED UP!  I have done the system restore several times to no avail.  WHAT DO I DO?

I upgraded my ATV and now when I select English during language selection, it goes no where.  The language selection screen just comes up over and over again.  I'M FED UP! 
I have done the system restore several times to no avail. 
WHAT DO I DO?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation.

Similar Messages

  • IPod getting stuck at the Language Select screen. HELP PLEASE!

    I couldn't turn my iPod on after charging it, so I reset factory settings. After that the buttons/clickwheel didn't work, and the only way I could turn my iPod on was with the hold switch, and then I would be stuck at the language select screen. When my friend suggested I do a hard reset (even though I didn't think the buttons worked) I did so and realized that I could also turn it on with that method, but I'm still stuck at the language screen.

    I don't know what a "hard reset" is.
    Have you tried a restore?
    See: How to restore the iPod to factory settings.

  • Whenever i go to open a picture message in full view the black loading screen just comes up with no picture? (verizon iphone 5)

    I have a 32gig iphone 5 on verizon and whenever i go to open a picture message the black screen that says loading just comes up and i can't view the picture... any help? PLEASE!

    Try using the wall charger to charge your iPhone.  Some USB ports do not enough power to charge your phone, or at the very least, it will take a much longer time than a wall charger.
    You will find that after having it plugged into the wall for 10min, it will have enough power to indicate that the battery is now charging.
    Save your money from buying a battery for your next iPhone  :-)

  • How can I get ITunes and mail to quit opening automatically ? I have done the right click, and it does not show that it is set to open at login and preferences doesn't help either ..???

    i have tried the options is past answers, but they dont work or when they say 'go to preferences' I dont have the same options on this Mac that they do
    any help is most appreciated ..
    thank you

    i have tried the options is past answers, but they dont work or when they say 'go to preferences' I dont have the same options on this Mac that they do
    any help is most appreciated ..
    thank you

  • My macBook Pro I click a link on a site for a PDF file and all I get is blank? I have done the preferance settings listed here but still blank. Please help

    When I open a PDF file from an internet site all I get is "Blank" . I have tried the preference settings listed here but it is still blank. Please help

    Disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
    PDF files may be found under entries like Portable document or Adobe PDF document or Adobe Acrobat Document.
    *Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader

  • Language selection screen after every recharge

    I have a 40GB 2nd generation Ipod. Every time I recharge it and power it back on it goes to the language selection screen. Is there anyway to fix this?
    Thanks
    -drauch
    2G IPOD    

    Looks like it. I tried this and I had no luck: https://discussions.apple.com/message/7540488#7540488

  • IPod Nani 5th Generation hangs at language selection screen

    As the title states, I have 2 iPods that both 'hang' at the Language Selection Screen. Able to reset iPod and iTunes see's it but always hangs at same place. Any ideas please?
    Cheers

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Updated and synced i-phone today, now all it wants to do is restore, i-phone does'nt work now, and since 8.30 this morning I have disconnected, reconnected, reset the i-phone, went into restore several times now and it just stick on restoring

    I updated the i-phone on i-tunes this morning, and since then it has not worked, I have reset the phone, but still wants to restore settings/software. I have done this several times now since 8.30 this morning, the phone as it stands now is fubarred!!!!, until I can restore the software/settings etc.. All i-tunes does is says is restoring but the progress bar is going nowhere, some one please help!!!!!, as I am close to throwing this phone in the bin!!!!.....I have searched the common causes apple site is useless as the reset does'nt work and neither does restoring!!!!

    See Here..
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    This will not necessarily work if the Device has been modified...

  • Can't connect to Time Capsule. Error: Could not connect to the disk. Make sure NetBIOS is enabled and try again (53).

    I have a Time Capsule that I've been using for a while now. I've got a Windows 8 PC and a few MacBooks that I use with it.
    Recently, I had to hard-reset my Windows 8 PC (with the reset button while everything was locked up). When it came back, I couldn't connect to my Time Capsule anymore. I get the error message: "Could not connect to the disk. Make sure NetBIOS is enabled and try again (53)."
    I've tried:
    Checking on the NetBIOS service to ensure that it's running
    Explicitly enabling NetBIOS on the Internet connection
    Renaming my Time Capusle to have no spaces or disallowed characters
    Pinging both the Time Capsule's name and IP address (both respond)
    Any suggestions?

    Do you have bonjour installed? If not I recommend you install the full apple airport utilities for windows.. although only win7 is available.. it does install in win8. Apple btw need to do some work on making windows access current.
    In windows explorer, simply type the address to the TC in the address bar.
    \\TCname or \\TCipaddress
    If it fails.. turn off firewall and ensure the PC is located at home..as opposed to work or public. A windows PC can go stupid and think it is suddenly in a new environment for no apparent reason. Your reset might do exactly such a thing.
    If you still have issues.. are you getting full internet access ok?
    Can you open the airport utility in windows and find the TC? If so go to the file sharing page and turn on the guest account to read and write access. This helps loads.. and make sure the workgroup is set to WORKGROUP.

  • HT201210 I did the update on my phone and now it just keeps restarting itself over and over again. It will come up with the black screen and apple sign and shut off and bring that up again. What do I do?

    First I did the update under general like I do every couple months. My phone came up with a screen, at the end of the update, that had a picture of the itunes icon and a picture of the iphone cord like I was supposed to connect to itunes. I did and itunes said that my phone needed to be "restored" to be reusable again, and the only option it gave me was to click the restore button. So I did and it went through a 30 minute restore session. Now my phone just shows the black screen with the apple icon and restarts over and over again. Clicking the buttons does nothing. It has been doing this for hours now. What do I do?

    The screen is telling you to connect the iPod to your computer and restore via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
    When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
    I hope this helps you my friend!

  • I just upgraded to Lion. When I import photos it imports the same photo over and over. Not even one of the photos selected!! Do you know how to fix this?

    I just upgraded to Lion. I just installed iLife'11 last night. When I import photos into iMovie (version 9.0.4.) , it imports the same photo over and over as if it were the ones I selected. Not even one of the photos selected!! The thumbnais show that unselected photo,  if I preview then I just see the preview screen all black.
    I even tried making an iPhoto album and importing straight from there. Exact same thing. I have restarted the application, restarted the computer, and googled half-to-death. No answers.
    Do any of you know how to fix this?
    I am working on OS X Lion (10.7.1) , a 2009 15" MacBook Pro. 4GB Memory. 2.4 GHz Intel Core 2 Duo. 4GB Memory 1067 MHz DDR3.
    Hope someone can help!!!

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • I have a new Macbook pro, I cannot get past the country selection screen.  'Continue' is greyed out and keys just make error sounds. How do I move it on?

    I have a new Macbook pro, I cannot get past the country selection screen.  'Continue' is greyed out and keys just make error sounds. How do I move it on?

    sideeque wrote:
    I have the same problem. What did you do last time?
    What  should I do now? Its around 40 miles away the apple store? Would they pay my taxi fare to go and return?
    How can we trust this apple product?
    You are still under warranty.  Call Apple Care.

  • Trying to activate a new iPad mini. Keep getting message that activation server can't be reached and to try through iTunes. I can't go back beyond the language choice screen to select iTunes. Two days of trying to activate. Help?

    Trying to activate a new iPad mini. Keep getting message that activation server can't be reached and to try through iTunes. I can't go back beyond the language choice screen to select iTunes. Two days of trying to activate. Help?

    Apple's download AND activation servers are being stressed today with all the downloads/activations. It might be best to wait and try later.

  • When I try to use ITunes Radio the screen just scrolls and plays the same song over and over

    When I try to use ITunes Radio the screen just scrolls and plays the same song over and over again?

    - First try resetting the iPod to make it visible in iTunes
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try placing the iPod in recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Last try placing the iPod in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for

  • Display image in classical report

    Experts, Please share how to display image stored in SO10 in to a  classical report??

  • 3870 very messed up artifacts

    I have a a K9A2 Platinum, 6400 Black Edition, 2 X 2 AData PC6400, MSI 3870 with Zalman VF900 cooler, Seagate 500 gig IDE drive, floppy, Phillips DVD Burner (Sata), I have a Scythe Ninja for CPU Cooler, using Vista Ultimate 64 bit. I leave the compute

  • WRT54G2 v1 fv1.0.04 stuck in wifi protected setup? /unable to switch to manual

    I just upgraded the firmware on a WRT54G2 v1 from firmware v1.0.00 to v1.0.04.  More or less everything was working fine before the upgrade.  I was surprised that it held most of the old settings, including the wireless settings.  The execpton is the

  • Dimensions in BMM

    HI all. i am new to OBIEE. i have one silly question. I have one table with 5 columns ( Emp number, Emp Last name, Emp First Name, Emp Middle Name, Emp Salary) in Business model. i am creating dimensions. i have created dimension high level one is La

  • Power Suddenly Doesn't Work

    I'm having a problem with the power to my iMac, 10.3.9 G5 non-intel, two year old computer. I don't think it's the original power supply since the everything in the surger works fine; my CD player/radio, the modem, the printer, the AirPort BaseStatio