The last failed audio CD burn had error code 4000(0x00000fa0)

I tried removing the itune, installing the most up to date one. I tried everything and I could use help badly. I put in new CD's to burn and it checks it and does not even burn the DVD and I wasted so many CD's doing that, I'm not quite sure what do to. It used to burn it easily and I'm not sure why its giving me this error code. Please help.

This is exactly the same problem I have.

Similar Messages

The last failed audio CD burn had error code 4900.

Has anyone come across what error code 4900 refers to? I have searched throughout the forum, but found no specific answer. This error occurs every time I try to burn a disc using a CD-R. Any help would be greatly appreciated. Thanks in advance.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
HP Pavilion 061 DQ177A-ABA A450N
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0), CDR4_XP (7.1.0.188), PFC (2.5.0.204), AFS2K (3.1.21.0),
UpperFilters: Cdralw2k (7.1.0.188), GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
IDE\DiskST3160021A_____________________________3.06___, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomRICOHDVD+RW_MP5240A____________________1.11___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSAMSUNGCD-ROM_SC-148C__________________B100___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
I: RICOH DVD+RW MP5240A, Rev 1.11
Drive is empty.
P: SAMSUNG CD-ROM SC-148C, Rev B100
Drive is empty.
The last failed audio CD burn had error code 4900(0x00001324). It happened on drive I: RICOH DVD+RW MP5240A on CDR media at speed 8X.

bump2.

"The last failed audio CD burn had error code -128(0xffffff80)"

Prior to the iTunes 7.0 update I had no problems burning discs from iTunes. Now, after the update I can begin burning, seem to burn a few tracks, before the whole system crashes causing a reboot. The drivers are up to date, and the drive is functioning correctly. Here is the diagnostics report:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Hewlett-Packard Pavilion zx5000 (DS476U#ABA)
iTunes 7.0.0.70
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: MOBILITY RADEON 9200\MOBILITY RADEON 9200
IDE\DiskWDCWD800UE-22HCT0_____________________09.07D09, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD+RW_GCA-4040N_______________1.17___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST DVD+RW GCA-4040N, Rev 1.17
Drive is empty.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVD+RW GCA-4040N on CDR media at speed 0X.

I guess I should also ask, is anyone else having their system crash after part way through burning an audio disc? And better yet, has anyone had this problem and then been able to fix it? Or, does anyone know how to resolve this if it can be resolved with the current 7.0 build.

CD burn had error code 4280, HELP!!!

I installed the latest version of iTunes, but as many other postings I've read, I have not been able to successfully burn a CD with iTunes since the installation. Every time I get the message, "The attempt to burn a disc failed. An unknown error occurred (4280)." I have used Device Manager in the Control Panel to try and update the driver for the CD-ROM, but Windows says it cannot find a better driver than the one I have installed. I also ran CD Diagnostics in the iTunes help menu and the text is attached below:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
VIA Technologies, Inc. KM266A-8235
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: S3 Graphics Inc. Savage4\S3 Compatible Display Adapter
IDE\DiskST3120026A_____________________________8.01___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomCD-ROMCMD5X11__________________________1.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTDKCDRW121032A_________________________1.00___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: CD-ROM CMD5X11, Rev 1.06
Drive is empty.
E: TDK CDRW121032A, Rev 1.00
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TDK CDRW121032A on CDR media at speed 12X.
PLEASE HELP ME!!!!!!!!!!!!!
AMD Sempron 2200+, 1.49 GHz, 256Mb RAM Windows XP CD-ROM Drive = TDK CDRW121032A, Driver Version = 5.1.2535.0, Driver Date = 7/1/2001
AMD Sempron 2200+, 1.49 GHz, 256Mb RAM Windows XP CD-ROM Drive = TDK CDRW121032A, Driver Version = 5.1.2535.0, Driver Date = 7/1/2001

bump2.

ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
Thanks!
Home Brew Windows XP Pro

Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

I used to be able to print stuff like coupons or patterns from websites but now for the last few months I get an error code 30 message. I have added nothing new, same printer, etc but I have let Firefox update. How do I fix this so I can print again?

I used to be able to go to a website and click their print button and it would print just fine. The only programs I will always update when they are available are Firefox, Avast Free Anti virus, and Malwarebytes. I think I may have updated Java too but it was after my printing problem began. I have the latest printer driver update installed which is the same version that I have been printing with before the error began. My printer is an Epson Stylus NX210 series All in One printer. My laptop is a Toshiba Satellite L650 series. I used to get the error message every time I tried to print a Michaels coupon but I was able to print from any other website I tried. Could someone please help me figure out what to do so I can start printing things again? Thank you!

If you are getting Siri when you double tap, then your home button must be sticking. Siri comes up when you hold the home button. Try tapping quickly twice. When that happens, the multi-tasking list comes up and you will see the app icon and then a thumbnail, or reduced size view of the app above it. You put your finger on that thumbnail and swipe upwards with your finger.
For that issue, you might want to do a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. This will not affect your data.
To be honest, your novel is a little difficult to read, and I think you put too much information in there, and a lot of it is unnecessary. Be to the point and just add information necessary to understand the issue.

Error code 4000 when burning

Hello,
I am having trouble burning my songs that I downloaded from ITunes. Have burned them once before and all went well but when I try to burn now all seems to go well and I can play the songs on my PC but at the end of the song I get a lot of odd noises and static. Very loud. I ran the diagnostics and this was the result:
Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
iTunes 7.3.2.6
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), UBHelper
UpperFilters: GEARAspiWDM (2.0.6.1), Cdralw2k (8.0.0.212), NTIDrvr (1.0.0.6),
Found aspi32 running.
Current user is an administrator.
Video Display Information:
SiS 661FX
Connected Device Information:
Disk drive, HDS722512VLAT20, Bus Type ATA, Bus Address [0,0]
Disk drive, Kodak CF/SD/MMC/SM USB Device, Bus Type USB
Disk drive, Kodak CF/SD/MMC/SM USB Device, Bus Type USB
Disk drive, Kodak CF/SD/MMC/SM USB Device, Bus Type USB
CD-ROM Drive, AOPEN DUW1616/ARR, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: AOPEN DUW1616/ARR, Rev 1030
Audio CD in drive.
Found 1 songs on CD, playing time 02:23 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 48.
The drive CDRW speeds are: 48.
The drive DVDR speeds are: 48.
The drive DVDRW speeds are: 48.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: AOPEN DUW1616/ARR on CDR media at speed 8X.
If anyone can help solve this problem it would be greatly appreciated. I have removed all item from running while I burn and it seems to make no difference. I am using Memorex media (CD-R) which is the same media I used with success the last time I burned with ITunes.
I am running ITunes on a PC with Windows 2000 Pro. Service pack 4.
Thanks in advance for any help you can offer.

Please tell us what burner you have. Look in System
Profiler > Hardware > Disc Burning.
You're using the Finder to burn?
A Google search on this error code turns up a lot of
topics. Some point to the media as the culprit,
others point to Tiger, some to the drive itself.
Fuji isn't a bad brand of media, but it's not
amongst the best, either.
Generally, an older burner can use 16X media, but
would obviously only be able to burn at the maximum
speed of the drive. It's possible that your drive
doesn't recognize the media code on the disc and
refuses to burn. Sometimes a firmware update to the
drive can solve this problem.
Here's the info under System Profiler>Hardware>Disc Burning:
SONY DVD RW DW-U10A:
Firmware Revision: A43h
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 8192 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
I'm trying to burn data onto a DVD disc as backup. How do I burn using Finder?
Also, Power Mac G5 Uniprocessor Firmware update 5.1.5f2 does show when I click on Apple>software updates. However, it does not have a check mark. Would this apply to my computer even though it does not have a check mark?

Help! error code 4000

i cant finish burning a cd. it gets almost to the end, then it cancels the burn and error 4000 pops up. here are my diagnostics. i have no idea what it means, but hopefully it'll help.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 8100
iTunes 7.2.0.34
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
Connected Device Information:
DiskDrive, IOMEGA ZIP 250, Bus Type ATA, Bus Address [1,0]
DiskDrive, WDC WD200BB-75CLB0, Bus Type ATA, Bus Address [0,0]
CDROM, SAMSUNG DVD-ROM SD-616, Bus Type ATA, Bus Address [0,0]
CDROM, SONY DVD RW DRU-830A USB Device, Bus Type USB
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
E: SAMSUNG DVD-ROM SD-616, Rev bp06
Drive is empty.
F: SONY DVD RW DRU-830A, Rev SS25
Audio CD in drive.
Found 11 songs on CD, playing time 39:42 on Audio CD.
Track 1, start time 00:06:71
Track 2, start time 03:56:14
Track 3, start time 07:03:48
Track 4, start time 11:12:09
Track 5, start time 14:45:32
Track 6, start time 18:42:20
Track 7, start time 22:06:48
Track 8, start time 25:06:44
Track 9, start time 28:14:42
Track 10, start time 31:16:12
Track 11, start time 34:56:08
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: SONY DVD RW DRU-830A on CDR media at speed 40X.
dell dimension 8100 Windows XP
dell dimension 8100 Windows XP

No you misunderstood. In the iTunes burning preferences you can pick several choices such as an Audio CD, an MP3 CD, or a data disk. Which one are you burning?
As I said, if you are burning to an Audio CD (a plain old audio CD that can be played on any audio CD player), lower the burn speed to x8 or lower and try again.
Patrick

Unable to Burn CDs - Error code: 2131

Hi Everyone!
HAs this one come up yet? I go to burn a CD, it initializes and then pops the CD out with error code 2131.
I have the latest version of -tunes on Vista.
Any help would be much appreciated!
Many Thanks

This is the diagnostic print from my i-tunes:
Microsoft Windows Vista Home Edition (Build 6000)
DIXONSXP DIXONSXP
iTunes 7.7.1.11
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.1.5
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 60612AC588C35EB6
Current user is not an administrator.
The current local date and time is 2008-08-22 14:50:18.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.0.7.3),
E: TSSTcorp CDDVDW TS-L632H, Rev TMC0
Audio CD in drive.
Found 18 songs on CD, playing time 63:14 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:31:37
Track 3, start time 07:30:67
Track 4, start time 11:32:05
Track 5, start time 15:56:67
Track 6, start time 19:46:47
Track 7, start time 22:46:67
Track 8, start time 26:23:25
Track 9, start time 30:37:07
Track 10, start time 34:14:62
Track 11, start time 35:16:65
Track 12, start time 39:02:00
Track 13, start time 40:36:65
Track 14, start time 44:55:37
Track 15, start time 48:21:05
Track 16, start time 53:09:50
Track 17, start time 55:18:65
Track 18, start time 59:37:32
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
The last failed audio CD burn had error code 2131(0x00000853). It happened on drive E: TSSTcorp CDDVDW TS-L632H on CDR media at speed 0X.

Error codes 4000 & 4251 downloading to CD

What I don't understand is: I have no problem downloading to CD a free podcast weekly, but when I BUY two podcasts and try to download them to CD, the download cancels, spits out cd and shows either error 4000 or 4251. I have XP Pro. Any suggestions?

Microsoft Windows XP Professional Service Pack 2 (Build 2600)
System manufacturer System Product Name
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
Intel(R) 82945G Express Chipset Family
Intel(R) 82945G Express Chipset Family
Connected Device Information:
DiskDrive, photosmart printer card reader (HPH09), Bus Type USB
DiskDrive, WDC WD80 0JB-00JJC0 SCSI Disk Device, Bus Type SCSI, Bus Address [0,0]
CDROM, MITSUMI CD-ROM FX4830T!B, Bus Type ATA, Bus Address [1,0]
CDROM, _NEC NR-7500A, Bus Type ATA, Bus Address [0,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: _NEC NR-7500A, Rev 1.20
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 02:44 on CDROM-XA media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 1 2 4 8.
The drive CDRW speeds are: 1 2 4.
E: MITSUMI CD-ROM FX4830T!B, Rev R02C
Drive is empty.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive D: _NEC NR-7500A on CDR media at speed 8X.

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

I got a message while burning a CD. "The Attempt to Burn the disc failed because of medium write error"..what does this mean?

i got this message while buring a CD on itunes. "The Attemp to burn the disc failed because of medium write error"..what do you make of this?
i think the CD was bad. i took the machine to the Apple store and they said the Optical Drive was OK. so it must be the CD's i'm using... i use Verbatim type. let me know.

'Mediium write error' means it failed to write to the disc - some makes work better than others and you may just have hit a single bad disc or maybe your burner doesn't like the make of disc. I've always had good results with TDK.

HT203164 I tried my first Windows CD burn with iTunes; the burn fails at different points in the burn with error codes 4450 or 4280.

I tried my first Windows CD burn with iTunes; the burn fails at different points during the burn, with error codes 4450 or 4280.

I have the same problem, after years of everything working great. Last time this happened I tried using a different brand of CD and it worked, but I must warn you that now iTunes rejects all three brands I have been trying to use.

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

The package failed to load due to error 0xC0011008

I am trying to run a SSIS Package from SQL Server BI Studio. I receive the error "The package failed to load due to error 0xC0011008". SQL Server 2008 R2 installed (32bit Win 7), along with Integration Services. The Package connects
to a SQL Server DB.
Here is the full error taken from consol in BI Studio:
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" starting.
Error: 0x1 at ST_Gen_Pkg_Src_SqlServ: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008
"Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
---> System.Runtime.InteropServices.COMException (0xC0011008): The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was
passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
   at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadPackage(String FileName, Boolean loadNeutral, IDTSEvents100 pEvents)
   at Microsoft.SqlServer.Dts.Runtime.Application.LoadPackage(String fileName, IDTSEvents events, Boolean loadNeutral)
   --- End of inner exception stack trace ---
   at ST_0f39f89613ca43e9a6660953aa72fa2c.csproj.ScriptMain.Main()
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig,       MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
   at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Task failed: ST_Gen_Pkg_Src_SqlServ
Warning: 0x80019002 at CreateDynSSIS_DB_RunDynSSiSDB: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" finished: Failure.
The error is thrown at this line:
DynamicPackage = app.LoadPackage(DynamicPackagePath, null);
Any help would be great! I've done a bit of Googling on the topic already.. and nothing has worked so far.

Hi,
Reason for the error: Old
version of the DTEXEC is picked up by SQL Server instead of the new one.
Refer this link for more info
THE PACKAGE FAILED TO LOAD DUE TO ERROR 0XC0011008
Hope this info Helps

The last failed audio CD burn had error code 4000(0x00000fa0)

Similar Messages

Maybe you are looking for