The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

Similar Messages

When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor. How do I fix these?

When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?

Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

I can not download newer themes. It continues to say So and so could not be installed because Firefox does not have the needed files. Also.. For the newer version, where is the tools option?

I am trying to download a new theme. Lava theme. However, it will not let me download that or any other theme for that matter.
It continues to say, So and so could not be installed because Firefox does not have the needed files. What does this mean?
Also, on the newer version.. I can not find the tools option..

The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/

Error message: ""/Library/StartupItems/IntegoCommon" has not been started because it does not have the proper security settings."

I recently got a new Macbook Pro. I transferred my info from my old mac. Now when I startup my Macbook Pro, I get this error message "“/Library/StartupItems/IntegoCommon” has not been started because it does not have the proper security settings." I have run Disk Utility, but nothing has changed.
Thanks!

Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac.

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

I am facing with the following problem whenever i start my laptop.Insecure Startup Item disabled."/Library/StartupItems/MobileBrServ" has not been started because it does not have the proper security settings.

I am facing with the following problem whenever i start my laptop(Macbook Air,OSX 10.9.4).
Insecure Startup Item disabled.“/Library/StartupItems/MobileBrServ” has not been started because it does not have the proper security settings.

Open /Library/StartupItems/ folder and locate the file then remove it. You have installed incompatible software. If you don't believe this is correct, then determine what software installed the item and contact the developer for help.

How do I deal with "StartUpItems if2k" has not been started because it does not have the proper security settings?

Whenever I turn on or restart my MBP, a dialog box appears saying --> “/Library/StartupItems/if2k” has not been started because it does not have the proper security settings.
How can I fix this?
First, I searched online and found a site with a If2k_Remover_V2.zip file, but whenever I try to open the link, a page comes up saying,
Forbidden
You don't have permission to access /w/files/if2k/If2k_Remover_V2.zip on this server.
Any thoughts on this?
Also, I see the if2k folder in the Library/StartUpItems; is it something I can just drag into the Trash? Or would that be a bad move?

Did you ever figure this out? I just upgraded to Lion on my Air and I have the same issue.

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Update your HP Printer drivers/software at their website or uninstall using the developers method.

Help!! Can someone help me with this message I keep getting before startup, please ?? Here it is: "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings. Help!?!?

Hello:
I keep getting this message upon startup. Can't figure out how to address it. Here it is.
"/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
Any suggestions?

There's an invisible one name "Icon" according to the error message.
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one.

Everytime I start up my macbook pro get error message Insecure Start Up Item Disabled /Library/Startupitems/HPTrapMonitor has not been started because it does not have the proper security settings

everytime I start up my computer I get error message
Insecure Start-Up Item Disabled
"/Library/StartupItems/HPTrapMonitor" has not been started because it does not have proper security settings

Hope info from this article helps.
http://support.apple.com/kb/TS3493
Best.

Preview error message doc "can not be saved because it does not exist"

I have had a long standing problem with Preview. I know it is odd but around closing time every day, two of my computers both running 10.6.8 get error message when trying to save a new document. The document will be open on my screen and when I go to save it I get the error message that the file can not be saved because it does not exist. Some background that may be relevent:
The documents that I create all day long (for at least 6 years) are output from a 4D database. I generate a report from the db and it opens in Preview as a PDF file. All day long I have no issues with creating and saving these docs. Then around 4-4:30 when many people are getting ready to leave two of our computers (one iMac 3.06GHz Intel Core i3 and an older macMini) have this problem. All you have to do to fix it is quit Preview and regen the doc. Unfortunately we often lose a lot of work because of it. I've tried anticipating when it will happen and restart Preview before creating the new doc but that only works occasionally.
I suspect that it has something to do with people logging out (I am usually the last to leave) and perhaps some shared application is effected. Everyone does have their own copy of Preview and we all use separate 4D clients. I have searched the internet many times. I have found some similar problems that people have had with this error but not related to my own. Unfortunately both Preview and "the file can not be saved because it does not exist" are very general terms that bring up all kinds of unrelated things.
I was going to try to delete the Preview Prefs file and start again but I can not find a plist for preview or any other file that is clearly the prefs. Searched the internet for that too but did not find it.
Does anyone have any ideas on this odd problem?
Thanks for reading!
Susan

To answer your questions:
Are you loading them by using Preview>File>Open, double clicking, or dragging the file? None of the above. I am loading them through 4D. I generate a report on 4D and it opens in Preview.
When this happens can you Open another PDF from the same location? Yes, see details below.
Are you loading these PDFs from the Server or another Mac? From the server. The file is created by a 4D client that resides on my disk but the 4D server which it references is on another computer. I am still shared to that computer and my connection to 4D has not changed as far as I can tell.
I found today (details written in response to another question) that when this happens I can save the file to my own desktop but not to the server. It makes me think there may actually be something happening with my connection. I wonder does a server do any realigning (for lack of a better word) of connections as some connections are lost? While I had the document open (the one that I could not save to the server) I went to the server and opened a document that existed there. I saved the file back to the server with a different name. No problem, it worked just fine. Now I am really confused....
1) A PDF file generated by 4D that has not ever been saved to the server can not be saved to the server via Preview around the time that other people are disconnecting from the server and shutting down their computers for the day. Quitting Preview and regenning the document fixes the problem.
2) The same PDF file that can not be saved to the server can be saved to my own disk.
3) Other files that are already existing on the server can be saved with a different name to the server at the same time as a new document can not.
I wish I felt like I was getting closer to the answer...
Thanks for thinking about it.
Susan

'My Application Page' is not allowed here because it does not extend class 'System.Web.UI.Page'

I have a custom SharePoint 2010 solution that includes an aspx page. The aspx page in is in the /layouts folder within the solution and I created it by just adding an application page to the solution. I am trying to create a parent-child relationship between
two different lists in SharePoint. From the parent I have a custom button on the ribbon that creates a child item with the ID of the parent stamped on it.
The page is just a processing page that forwards on parameters from the parent to the new child item. (i.e. the ID value)
The code generated when I add the aspx page is below:
<%@ Assembly Name="$SharePoint.Project.AssemblyFullName$" %>
<%@ Import Namespace="Microsoft.SharePoint.ApplicationPages" %>
<%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="asp" Namespace="System.Web.UI" Assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" %>
<%@ Import Namespace="Microsoft.SharePoint" %>
<%@ Assembly Name="Microsoft.Web.CommandUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="MY.Solution.Layouts.MY.Solution.processingpage" MasterPageFile="~/_layouts/application.master" %>
<asp:Content ID="PageHead" ContentPlaceHolderID="PlaceHolderAdditionalPageHead" runat="server">
</asp:Content>
<asp:Content ID="Main" ContentPlaceHolderID="PlaceHolderMain" runat="server">
</asp:Content>
<asp:Content ID="PageTitle" ContentPlaceHolderID="PlaceHolderPageTitle" runat="server"> Processing Page </asp:Content>
<asp:Content ID="PageTitleInTitleArea" ContentPlaceHolderID="PlaceHolderPageTitleInTitleArea" runat="server" > Processing Page </asp:Content>
The code behind is as follows:
using System;
using Microsoft.SharePoint;
using Microsoft.SharePoint.Administration;
using Microsoft.SharePoint.WebControls;
using Microsoft.SharePoint.Utilities;
using System.Reflection;
namespace MY.Solution.Layouts.MY.Solution
public partial class processingpage : LayoutsPageBase
protected void Page_Load(object sender, EventArgs e)
try
//Get a reference to the SPWeb object
SPWeb oWeb = SPContext.Current.Web;
//Use the Parameters That Are Passed In
SPList thisList = oWeb.Lists[new Guid(Request.QueryString["List"])];
SPListItem thisItem = thisList.GetItemById(int.Parse(Request.QueryString["ID"]));
sContentType = thisItem["ContentType"].ToString();
sContentTypeID = thisItem.ContentTypeId.ToString();
if (sContentType == "Some Content Type")
sContentTypeID = "";
sAIID = thisItem["ID"].ToString();
//Redirect to newform.aspx with the Appropriate parameters.
Context.Response.Redirect(oWeb.Url + "/Lists/Blist" + "/NewForm.aspx?AIID=" + sAIAuditID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
else if (sContentType == "Some Content Type")
sContentTypeID = "";
sAIID = thisItem["AIID"].ToString();
//Redirect to newform.aspx with the Appropriate parameters.
Context.Response.Redirect(oWeb.Url + "/Lists/AList" + "/NewForm.aspx?AIID=" + sAIID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
else if (sContentType == "Some Content Type")
sContentTypeID = "";
sAICID = thisItem["AICID"].ToString();
//Redirect to newform.aspx with the Appropriate parameters.
Context.Response.Redirect(oWeb.Url + "/Lists/CList" + "/NewForm.aspx?AICID=" + sAICID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
else
LoggingService.LogError("MY.Solution - Processing Page", "No Applicable Content Type Found.");
catch (Exception ex)
LoggingService.LogError("My.Solution - Processing Page", ex.Message);
finally
//DO SOME FINAL THINGS HERE WHEN REQUIRED.
In the page I need to use Request.QueryString to get the values from the URL. But when I deploy the solution and load the page I get the error:
'MY.Solution.Layouts.MY.Solution.processingpage' is not allowed here because it does not extend class 'System.Web.UI.Page'.
When I change the line:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="MY.Solution.Layouts.MY.Solution.processingpage" MasterPageFile="~/_layouts/application.master" %>
to inherit as follows:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="Microsoft.SharePoint.WebControls.LayoutsPageBase" MasterPageFile="~/_layouts/application.master" %>
it does not work either.
If I change it to inherit like below:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="System.Web.UI.Page" MasterPageFile="~/_layouts/application.master" %>
it also does not work.
What does this error actually mean? And why doesn't the default code generated by Visual Studio work?

@NadeemYousuf I have tried this too and it didn't work.
What does the error even mean? And why does the error appear with default Visual Studio code? In my example I have just added a basic application page with no other code in it and it still does not work.

Have the IPhone g and when I slide my finger across it to unlock it or even turn it off it does not do anything does anyone know why.

I have the IPhone 3g and when I slide my finger across it to unlock it or even turn it off it does not do anything does anyone know why.

Try resetting it: hold the on/off and home buttons at the same time until you see the Apple logo (ignore the off slider that appears first), then release and wait for it to restart.

Chromedit will not be installed because it does not provide secure updates.

Chromedit will not be installed because it does not provide secure updates.?
what should i do to install this ?
== This happened ==
Just once or twice
== i installing cromedit

Did you install this version?
ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

Similar Messages

Maybe you are looking for