The LOG file \work\dev_jcontrol is not present

The LOG file \work\dev_jcontrol is not present; even thou I have restarted the server:
stopsap
startsap <j2ee_instanse>
Any idea?

Hi,
cluster ID is just combination of below parameters:
In our case, my source system (ABC) was refreshed from another system (XYZ) recently
so while installing target system ( DEF), I changed the source system details from ABC to XYZ in below file and retried the
SAPinst screen. System copy has got completed successfully.
Open the file <installation directory>/jmt/cluster_id_switch.properties and edit the line
src.ci.sid=
src.ci.instance.number=
src.ci.instance.name=
src.ci.host=
If in your case source system is not refreshed recently; You may try with functional host name or OS host name etc. details for above parameters.
If this does not work check details of "SAP Note 966752 - Java system copy problems with the Java
Migration Toolkit" which says almost the same thing but I could not get that as the statements related to
box number are bit confusing and contradictory.
Cheers !!!
Ashish

Similar Messages

  • Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore

    Hi;
    i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
    Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
    what s the solution.
    Thanks for your help

    Hello,
    I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
    Thanks,

  • When I try to print my book I receive the following error message:  One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images.

    When I try to print my book, I receive the following error message:  One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images.  I don't understand what this means since all the photos are in the book.  Can someone please clarify?

    When you look at the images in the browser, do you see any arrow icons on your thumbnails? Like these:
    When you import your images from a folder on your system drive, you have two ways to import:
    Managed: Import and store the images in the library
    Or referenced: Leave the images in the folder outside the Aperture library.
    This is controlled by the "Store Files" settings in the Import panel:
    If you did not set "Store files" to "In the Aperture Library", the originals will stay in the folder outside.
    The error message you get, suggests that Aperture assumes the original files are in a folder outside the library.
    Select one of your images in the Browser and use the command "File > Show in Finder" - is this command available or dimmed out?

  • OWB does not store errors in the log files?

    I've specified the log file on the mapping. When I execute the mapping, I see that it does create the log file i specified. However, there are no error logs in the file itself. Is there a step I'm missing. What do I need to do in order for OWB to generate the error codes into the log file?

    The description and instructions for all the different log files and audit records are in this document
    http://otn.oracle.com/products/warehouse/pdf/Cases/case10.pdf
    Nikolai Rochnik

  • Can't open Flash Builder - "See the log file" error.

    I have been using Flash Builder 4.5 and for some reason it has stopped opening correctly - I get the following error then it just shuts down.... :
    "An error has occured. See the log file."
    and if i check the log file it refers to then i see the following text:
    !SESSION 2011-06-22 13:53:43.658 -----------------------------------------------
    eclipse.buildId=M20100909-0800
    java.version=1.6.0_16
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments:  -os win32 -ws win32 -arch x86
    !ENTRY org.eclipse.osgi 4 0 2011-06-22 13:53:59.598
    !MESSAGE Application error
    !STACK 1
    org.eclipse.swt.SWTError: No more handles
        at org.eclipse.swt.SWT.error(SWT.java:4109)
        at org.eclipse.swt.SWT.error(SWT.java:3998)
        at org.eclipse.swt.SWT.error(SWT.java:3969)
        at org.eclipse.swt.widgets.Widget.error(Widget.java:468)
        at org.eclipse.swt.widgets.Control.createHandle(Control.java:633)
        at org.eclipse.swt.widgets.Composite.createHandle(Composite.java:305)
        at org.eclipse.swt.widgets.Control.createWidget(Control.java:649)
        at org.eclipse.swt.widgets.Scrollable.createWidget(Scrollable.java:134)
        at org.eclipse.swt.widgets.Control.<init>(Control.java:110)
        at org.eclipse.swt.widgets.Scrollable.<init>(Scrollable.java:75)
        at org.eclipse.swt.widgets.Composite.<init>(Composite.java:95)
        at org.eclipse.ui.splash.BasicSplashHandler.getBundleProgressMonitor(BasicSplashHandler.java :159)
        at org.eclipse.ui.splash.BasicSplashHandler.getContent(BasicSplashHandler.java:265)
        at org.eclipse.ui.internal.splash.EclipseSplashHandler.init(EclipseSplashHandler.java:86)
        at org.eclipse.ui.internal.Workbench$8.run(Workbench.java:782)
        at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
        at org.eclipse.ui.internal.Workbench.createSplashWrapper(Workbench.java:798)
        at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2467)
        at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
        at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
        at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
        at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
        at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
        at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
    This is incredably frustrating as you can imagine as it effectively means i cant work anymore, it is clearly some kind of problem with eclipse but i have no idea what.
    I have tried re-installing Flash Builder twice and no luck.
    Can anyone help with this???
    Thanks !!!!
    Elliot.

    There is a similar thread with exact same stackstrace and problmes reported with earlier verison of FB. You can check it here http://forums.adobe.com/thread/832073. Thre is also representation of Adobe engineers on this thread. Aprarenlty there are certain updates(Eclipse / java) that FB doen't encourage, post FB is installed in stanadlone mode and workarounds are suggested on this thread to overcome this problem. If you are workign in plugin environment with FB, I guess updates are not affecting FB installtion. Please try out the solutions presented on this thread and let us know.

  • History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

    Hi all
    I've got a error msg when try to generate a report using Cisco history report tool:
    Error | An Exceptional Error occurred. Application exiting.  Check the log file for error 5022
    It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
    User tried samething on other PC, it working fine.
    only on user' own PC and only choose this report, error appears.
    user runing windows 7 and do not have crystal report installed
    tried reinstalled the software, doesn't work.
    also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
    then tried https://supportforums.cisco.com/docs/DOC-6209  - doesn't work
    attached the log file.
    thanks.

    wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian 
    I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
    this matter only happens on this PC, when user try same thing on other PC, it works.
    so i think it not relate to server or account.

  • Bursting Program Ends in Error with nothing in the Log file

    Hi All
    I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
    below is my log file
    +---------------------------------------------------------------------------+
    XML Publisher: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XDOBURSTREP module: XML Publisher Report Bursting Program
    +---------------------------------------------------------------------------+
    Current system time is 30-SEP-2013 15:11:15
    +---------------------------------------------------------------------------+
    XML/BI Publisher Version : 5.6.3
    Request ID: 574533
    All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
    Report Req ID: 574532
    Debug Flag: Y
    Updating request description
    Updated description
    Retrieving XML request information
    Node Name:T1DEVEBSAPP1
    Preparing parameters
    null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
    inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
    Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
    Set Bursting parameters..
    Temp. Directory:/tmp
    [093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
    [093013_031118657][][STATEMENT] setOAProperties called..
    Bursting propertes.....
    {user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
    Start bursting process..
    Bursting process complete..
    Generating Bursting Status Report..
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    602
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 30-SEP-2013 15:11:41
    +---------------------------------------------------------------------------+
    and the output says..
    "Error!! Could not deliver the output for Delivery channel:null "
    Wondering What might be the issue, any help on this is greatly appreciated.
    -Ragul

    Ram,
    Is this a custom or standard concurrent program?
    Was this working properly before? If yes, what changes have been done recently?
    Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
    Regards,
    Hussein

  • MDIS failed to generate the Log file!!!

    Hello All,
    Having a issue where MDIS is not generating the log file..
    The scenario is something like this-
    The files are getting archived and the records not flowing into MDM
    Basis team says-
    2014-06-30T14:11:33.339,47083231971072,24,"[MDS=sapdpm1 Repository=REAL_ESTATE ClientSystem=MDM_REAL_ESTATE Port=Building]: Nigerian Building updates part 2 - SLKDDY.txt is empty, the file will be skipped
    But the source file was having data it was not empty(bit strange!!)
    Also its not generating the LOG to analyze
    Regards,
    Girish

    Hi Shenoy,
    Let me explain the scenario--
    User uploads the file through Portal and through FTP records resides in MDM...the issues is when i tried to import through IM it worked and i tried manually push file through Filezilla FTP it worked.
    But when we upload file through portal, the file resides in Archive and generating the message-
    2014-06-30T14:11:33.339,47083231971072,24,"[MDS=sapdpm1 Repository=REAL_ESTATE ClientSystem=MDM_REAL_ESTATE Port=Building]: Nigerian Building updates part 2 - SLKDDY.txtis empty, the file will be skipped
    But the file is having data.
    Regards,
    Girish

  • Log4j problem for backing up the log file

    This is my log4j.properties. it doesn't seem to back up the log file and create a new log file when it reaches to MAX size. can anybody look at it?
    Thanks..
    log4j.rootCategory=debug, stdout, R
    # Print only messages of priority WARN or higher for your category
    log4j.category.your.category.name=WARN
    # Specifically inherit the priority level
    #log4j.category.your.category.name=INHERITED
    #### First appender writes to console
    log4j.appender.stdout=org.apache.log4j.ConsoleAppender
    log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
    # Pattern to output the caller's file name and line number.
    log4j.appender.stdout.layout.ConversionPattern=[%d] [%c] %-5p - %m%n
    #### Second appender writes to a file
    log4j.appender.R=org.apache.log4j.RollingFileAppender
    log4j.appender.R.File=/opt/mc/logs/AMSWAS.log
    # Control the maximum log file size
    log4j.appender.R.MaxFileSize=200000KB
    log4j.appender.R.MaxBackupIndex=1
    log4j.appender.R.layout=org.apache.log4j.PatternLayout
    log4j.appender.R.layout.ConversionPattern=[%d] [%c] %-5p - %m%n

    Hello again Tom and thanks for your help!
    No, I didn't optimize any media though I've rendered proxies for all media. I have about 14TB of R3D footage on five external harddrives, it's a feature. The proxies and sound files which I copied to the library makes the library file that big. I can't consolidate all media, as far as I know, since I don't have a drive even close to the size of all the R3D footage.
    In terms of copying I have only tried the good old "copy/paste" method. I have never used any of those programs you mentioned. Can those programs be used to copy certain files or will they copy an entire drive?
    Will the automatic back-ups FCPX does every 15 minutes save my timelines if something would go wrong and the library file would dissappear? I don't fully understand how that back-up process works. I could always render new proxies, though it would take time, but re-editing all those timelines is a whole other thing. Important to note here is that I'm used to Premiere Pro and the "old" FCP which is why all of this is so confusing.
    Thank you again!

  • How to find the log file on server

    Hi All,
    Here we have installed J2EE Engine & JDI on seperate machine.We have developed a new FPM application. The application is not working it is giving the error when run the application. It is giving the error "500 Internal Server Error Failed to process request. Please contact your system administrator". We want to see the log file what the error is, where can we find the log file.
    Regards
    Suresh

    Hi
    See this thread
    /message/1656215#1656215 [original link is broken]
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e2/75a74046033913e10000000a155106/frameset.htm">Logging</a>
    See this blogs
    <a href="/people/karsten.geiseler/blog/2005/06/06/netweaver-portal-log-configuration-viewing-part-1 Portal Log Configuration & Viewing (Part 1)</a>
    Kind Regards
    Mukesh

  • Confused about the log files

    I have written an application that has a Primary and Secondary database. The application creates tens-of-thousands of records in the Primary database, with a 1-to-1 relationship in the Secondary. On subsequent runs it will either update existing Primary records (which should not update the secondary as that element does not change) or it will create new records.
    The application actually works correctly, with the right data, the right updates and the right logical processing. The problem is the log files.
    The input data I am testing with is originally 2Mb as a CSV file and with a fresh database it creates almost 20Mb of data. This is about right for the way it splits the information up and indexes it. If I run the application again with exactly the same data, it should just update all the entries and create nothing new. My understanding is that the updated records will be written to the end of the logs, and the old ones in the earlier logs would be redundant and the cleaner thread would clean them up. I am explicitly cleaning as per the examples. The issue is that each run, the data just doubles in size! Logically it is fine, physically it is taking a ridiculous amount of space. RUnning DbSpace shows that the logs are mostly full (over 90%) where I would expect most to be empty, or sparsely occupied as the new updates are written to new files. cleanLog() does nothing. I am at a total loss!
    Generally the processing I am doing on the primary is looking up the key, if it is there updating the entry, if not creating one. I have been using a cursor to do this, and using the putCurrent() method for existing updates, and put() for new records. I have even tried using Database.delete() and the full put() in place of putCurrent() - but no difference (except it is slower).
    Please help - it is driving me nuts!

    Let me provide a little more context for the questions I was asking. If this doesn't lead us further into understanding your log situation, perhaps we should take this offline. When log cleaning doesn't occur, the basic questions are:
    a. is the application doing anything that prohibits log cleaning? (in your case, no)
    b. has the utilization level fallen to the point where log cleaning should occur? (not on the second run, but it should on following runs)
    c. does the log utilization level match what the application expects? (no, it doesn't match what you expect).
    1) Ran DbDump with and withour -r. I am expecting the
    data to stay consistent. So, after the first run it
    creates the data, and leaves 20mb in place, 3 log
    files near 100% used. After the second run it should
    update the records (which it does from the
    applications point of view) but I now have 40mb
    across 5 log files all near 100% usage.I think that it's accurate to say that both of us are not surprised that the second run (which updates data but does not change the number of records) creates a second 20MB of log, for a total of 40MB. What we do expect though, is that the utilization reported by DbSpace should fall to closer to 50%. Note that since JE's default minimum utilization level is 50%, we don't expect any automatic log cleaning even after the second run.
    Here's the sort of behavior we'd expect from JE if all the basics are taken care of (there are enough log files, there are no open txns, the application stays up long enough for the daemon to run, or the application does batch cleanLog calls itself, etc).
    run 1 - creates 20MB of log file, near 100% utilization, no log cleaning
    run 2 - updates every record, creates another 20MB of log file, utilization falls, maybe to around 60%. No log cleaning yet, because the utilization is still above the 50% threshold.
    run 3 - updates every record, creates another 20MB of log file, utilization falls below 50%, log cleaning starts running, either in the background by the daemon thread, or because the app calls Environment.cleanLog(), without any need to set je.cleaner.forceCleanFiles.
    So the question here is (c) from above -- you're saying that your DbSpace utilization level doesn't match what you believe your application is doing. There are three possible answers -- your application has a bug :-), or with secondaries and whatnot, JE is representing your data in a fashion you didn't expect, or JE's disk space utilization calculation is inaccurate.
    I suggested using DbDump -r as a first sanity check of what data your application holds. It will dump all the valid records in the environment (though not in key order, no -r is slower, but dumps in key order). Keys and data should up on different lines, so the number of lines in the dump files should be twice the number of records in the environment. You've done this already in your application, but this is an independent way of checking. It also makes it easier to see what portion of data is in primary versus secondary databases, because the data is dumped into per-database files. You could also load the data into a new, blank environment to look at it.
    I think asked you about the size of your records because a customer recently reported a JE disk utilization bug, which we are currently working on. It turns out that if your data records are very different in size (in this case, 4 orders of magnitude) and consistently only the larger or the smaller records are made obsolete, the utilization number gets out of whack. It doesn't really sound like your situation, because you're updating all your records, and they don't sound like they're that different in size. But nevertheless, here's a way of looking at what JE thinks your record sizes are. Run this command:
    java -jar je.jar DbPrintLog -h <envhome> -S
    and you'll see some output that talks about different types of log entries, and their sizes. Look at the lines that say LN and LN_TX at the top. These are data records. Do they match the sizes you expect? These lines do include JE's per-record headers. How large that is depends on whether your data is transactional or not. Non-transactional data records have a header of about 35 bytes, whereas transactional data records have 60 bytes added to them. If your data is small, that can be quite a large percentage. This is quite a lot more than for BDB (Core), partly because BDB (Core) doesn't have record level locking, and partly because we store a number of internal fields as 64 bit rather than 16 or 32 bit values.
    The line that's labelled "key/data" shows what portion JE thinks is the application's data. Note that DbPrintLog, unlike DbSpace, doesn't account for obsoleteness, so while you'll see a more detailed picture of what the records look like in the log, you may see more records than you expect.
    A last step we can take is to send you a development version of DbSpace that has a new feature to recalculate the utilization level. It runs more slowly than the vanilla DbSpace, but is a way of double checking the utilization level.
    In my first response, I suggested trying je.cleaner.forceCleanFiles just to make it clear that the cleaner will run, and to see if the problem is really around the question of what the utilization level should be. Setting that property lets the cleaner bypass the utilization trigger. If using it really reduced the size of your logs, it reinforces that your idea of what your application is doing is correct, and casts suspicion on the utilization calculation.
    So in summary, let's try these steps
    - use DbDump and DbPrintLog to double check the amount and size of your application data
    - make a table of runs, that shows the log size in bytes, number of log files, and the utilization level reported by DbSpace
    - run a je.cleaner.forceCleanFiles cleanLog loop on one of the logs that seems to have a high utilization level, and see how much it reduces to, and what the resulting utilization level is
    If it all points to JE, we'll probably take it offline, and ask for your test case.
    Regards,
    Linda

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • Bursting Program Errors Out with nothing in the Log file

    Hi All
    I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
    below is my log file
    +---------------------------------------------------------------------------+
    XML Publisher: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XDOBURSTREP module: XML Publisher Report Bursting Program
    +---------------------------------------------------------------------------+
    Current system time is 30-SEP-2013 15:11:15
    +---------------------------------------------------------------------------+
    XML/BI Publisher Version : 5.6.3
    Request ID: 574533
    All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
    Report Req ID: 574532
    Debug Flag: Y
    Updating request description
    Updated description
    Retrieving XML request information
    Node Name:T1DEVEBSAPP1
    Preparing parameters
    null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
    inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
    Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
    Set Bursting parameters..
    Temp. Directory:/tmp
    [093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
    [093013_031118657][][STATEMENT] setOAProperties called..
    Bursting propertes.....
    {user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
    Start bursting process..
    Bursting process complete..
    Generating Bursting Status Report..
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    602
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 30-SEP-2013 15:11:41
    +---------------------------------------------------------------------------+
    and the output says..
    "Error!! Could not deliver the output for Delivery channel:null "
    Wondering What might be the issue, any help on this is greatly appreciated.
    -Ragul

    Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
    I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
    Thanks,
    Hussein

  • I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

    I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
    Failed to verify the preflight file. It is not signed by Apple.
    How to I get past this?  I cannot find anything referencing preflight file.  Who can identify this?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL. Log out, log back in, and test.

  • (Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

    Hi All,
    I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054"  when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out 
    The log file stated that there were ongoing connections of HRC with the CCX  (I am sure there isn't any active login to HRC)
    || When you tried to login the following error was being displayed because the maximum number of connections were reached for the server .  We can see that a total number of 5 connections have been configured . ||
    1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
    || Below we can see all 5 connections being used up . ||
    2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
    || Once the maximum number of connection was reached it threw an error . ||
    3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
    4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
    Current exact UCCX Version 9.0.2.11001-24
    Current CUCM Version 8.6.2.23900-10
    Business impact  Not Critical
    Exact error message  All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
    What is the OS version of the PC you are running  and is it physical machine or virtual machine that is running the HRC client ..
    OS Version Windows 7 Home Premium  64 bit and it’s a physical machine.
    . The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
    I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ? 

    We have had this "PRX5" problem with Exchange 2013 since the RTM version.  We recently applied CU3, and it did not correct the problem.  We have seen this problem on every Exchange 2013 we manage.  They are all installations where all roles
    are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
    We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth.  None of those "solutions" made any difference whatsoever.  The occurrence of the temporary error PRX5 seems totally random. 
    About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
    Most people don't ever notice the issue because remote mail servers retry the connection later.  However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
    simply fail.  Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
    Is Microsoft totally oblivious to this problem?
    PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
    JSB

Maybe you are looking for

  • How do aperture and iphoto interact

    I am purchasing a new imac this week and am trying to get an idea on what software I want.  I've been using adobe photoshop elements for the past few years when I needed to fix any photos and iphoto to sort and 'hold' my collection.  I've been readin

  • HT1725 I can't get my purchases on my games that I downloaded

    I can't get my downloads when I purchase from my games

  • Like Operator is not working

    Hi have a table BACKLOG where i have a column called item_number I have made report on this table and i have included all item_number. Now i have to create another set of reports where i have to exclude records on basis of item_number. For this i hav

  • Spam Bots and Hyperlinks

    I'm putting in email address' in our MUG's newsletter. In Pages I can create some text such as Chief Geek and in the hyperlink input mailto:[email protected] (Not real email address") to make it a live link. When I export to PDF the links work great

  • CS3 Bridge Shows only NEF Thumbnails from D300S Images

    I have CS3 and have been trying to get larger than thumbnail images in Bridge from my Nikon NEF raw files from my new D300S.  Is there a raw update and how do I install it?  Sorry to be so dumb.  Thanks for your help.  Jerome