The macro attempted to modify a key figure that is not locked

Hi
In my planning area I choosen detailed lock, keyfigure specific lock and do not lock read only keyfig after that In interactive DP, I have 2 Planning Books A and B .when I load the selection for book A itu2019s loaded well because all are editable key fig but when I load book B I get error u201CThe macro attempted to modify a key figure that is not lockedu201D in this book 3are editable keyfig 3 are display. I am in SAP SCM 7.0,I had seen the SAP NOTE 851731but its too old i think now iam in advanced that that but that note is not there in my system .
Any ideas on why this is happening?
Regards
siva
Edited by: sivaram2411 on Feb 3, 2012 1:52 PM

Hello,
According to your setting in the palnning area ("do not lock read-only key figures"), if you have set a key figure as "Output Only" in /sapapo/mc8b or by a default macro, then this key figure could not get locked.
It is not allowed to make changes to unlocked key figures. So if there's a macro that tries to update this key figure, you'll get the error message.
If you have "do not lock read-only key figures" set, you must make sure that your macros do not make changes to those key figures that are output only (read only).
Best Regards,
Ada

Similar Messages

Attempt to set a parameter name that does not occur in the SQL: vc_temp_1

I have query view object build on the following sql
select
nvl(u.full_name,e.arabic_first_name||' '||e.arabic_family_name) as empName,
(select sc.general_specialty from ta_scientific_certificate sc where sc.user_id=u.user_id
group by sc.general_specialty
Having Max(sc.qualification_kind)>= All (select max(sc1.qualification_kind) from ta_scientific_certificate sc1 where sc1.user_id=u.user_id group by sc1.qualification_kind ) )as general_specialty
, u.*,ur.default_role,ur.role_1,ur.role_2,ur.role_3,ur.role_4,ur.role_5,ur.role_6,ur.role_7
from ta_user u,employee e,TA_USER_ROLES ur
where u.account_enabled='1' and u.emp_id = e.empl_code(+) and ur.user_id=u.user_id(+)
with this query
( (EMP_ID IS NULL ) ) AND (( ( (DEFAULT_ROLE = 4 ) ) OR ( (DEFAULT_ROLE = 6 ) ) )OR( ( (ROLE_1 = 4 ) ) OR ( (ROLE_1 = 6 ) ) )OR( ( (ROLE_2 = 4 ) ) OR ( (ROLE_2 = 6 ) ) )OR( ( (ROLE_3 = 4 ) ) OR ( (ROLE_3 = 6 ) ) )OR( ( (ROLE_4 = 4 ) ) OR ( (ROLE_4 = 6 ) ) )OR( ( (ROLE_5 = 4 ) ) OR ( (ROLE_5 = 6 ) ) )OR( ( (ROLE_6 = 4 ) ) OR ( (ROLE_6 = 6 ) ) )OR( ( (ROLE_7 = 4 ) ) OR ( (ROLE_7 = 6 ) ) ))
I created search page by dragging this view object from MyApplicationModule->NamedCriteria
but i don't want to show all the fields that their names start with ROLE in my search option so I unChecked the attribute queryalbe
no when I press button search the error Attempt to set a parameter name that does not occur in the SQL: vc_temp_1 is shown
if i press OK on error message and click search again it works
how can I make this error disappear

no I don't think that i have
this is my source ( I will divide it into two parts)
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">

<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="SciQualMgtVO"
Version="11.1.2.60.17"
OrderBy='"EMPNAME"'
BindingStyle="OracleName"
CustomQuery="true"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
<Attr Name="_isExpertMode" Value="true"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO_LABEL"/>
</SchemaBasedProperties>
</Properties>
<ViewAccessor
Name="LookupAM_IpaCodesVO_GeneralSpecialityVA"
ViewObjectName="ta.common.lookup.IpaCodesVO"
AMUsageName="LookupAM"
ViewInstanceName="IpaCodesVO_GeneralSpecialityDC"
RowLevelBinds="true"/>
<ViewAccessor
Name="CountryVA"
ViewObjectName="ta.common.lookup.CountryVO"
RowLevelBinds="true"/>
<ViewAccessor
Name="DegreeVA"
ViewObjectName="ta.common.lookup.DegreeVO"
RowLevelBinds="true"/>
<ViewAccessor
Name="LookupAM_IpaCodesVO_ScientificQualificationVA"
ViewObjectName="ta.common.lookup.IpaCodesVO"
AMUsageName="LookupAM"
ViewInstanceName="IpaCodesVO_ScientificQualificationDC"
RowLevelBinds="true"/>
<ViewAccessor
Name="YesNoVA"
ViewObjectName="ta.common.constants.YesNoVO"
RowLevelBinds="true"/>
<ViewAccessor
Name="IpaCodesVO_GeneralSpecialityVA"
ViewObjectName="ta.common.lookup.IpaCodesVO"
RowLevelBinds="true">
<ViewCriteriaUsage
Name="IpaCodesVO_GeneralSpecialityCriteria"
FullName="ta.common.lookup.IpaCodesVO.IpaCodesVO_GeneralSpecialityCriteria"/>
</ViewAccessor>
<ViewAccessor
Name="IpaCodesVO_ScientificQualificationVA"
ViewObjectName="ta.common.lookup.IpaCodesVO"
AMUsageName="LookupAM"
ViewInstanceName="IpaCodesVO_ScientificQualificationDC"
RowLevelBinds="true">
<ViewCriteriaUsage
Name="IpaCodesVO_ScientificQualificationCriteria"
FullName="ta.common.lookup.IpaCodesVO.IpaCodesVO_ScientificQualificationCriteria"/>
</ViewAccessor>
<ListBinding
Name="ar_LOV_GeneralSpecialty"
ListVOName="IpaCodesVO_GeneralSpecialityVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="GeneralSpecialty"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ArabicDescription"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_GeneralSpecialty"
ListVOName="IpaCodesVO_GeneralSpecialityVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="GeneralSpecialty"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishDescription"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_male_LOV_Nationality"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Nationality"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="MaleNational"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_female_LOV_Nationality"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Nationality"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="FemaleNational"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_Nationality"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Nationality"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishNational"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_LOV_ScientificDegree"
ListVOName="IpaCodesVO_ScientificQualificationVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="ScientificDegree"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ArabicDescription"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_ScientificDegree"
ListVOName="IpaCodesVO_ScientificQualificationVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="ScientificDegree"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishDescription"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_ScientificQualification"
ListVOName="DegreeVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="ScientificQualification"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="DegreeCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_LOV_Country"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Country"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ArabicName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_Country"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Country"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="LOV_PastArbitration"
ListVOName="YesNoVA"
ListRangeSize="-1"
NullValueFlag="none"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="PastArbitration"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="Name"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="LOV_PastCooperation"
ListVOName="YesNoVA"
ListRangeSize="-1"
NullValueFlag="none"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="PastCooperation"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="Name"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="LOV_FutureCooperation"
ListVOName="YesNoVA"
ListRangeSize="-1"
NullValueFlag="none"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="FutureCooperation"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="Name"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_LOV_ScientificQualification"
ListVOName="DegreeVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="ScientificQualification"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="DegreeCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ArabicName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<SQLQuery><![CDATA[select
nvl(u.full_name,e.arabic_first_name||' '||e.arabic_family_name) as empName,
(select sc.general_specialty from ta_scientific_certificate sc where sc.user_id=u.user_id
group by sc.general_specialty
Having Max(sc.qualification_kind)>= All (select max(sc1.qualification_kind) from ta_scientific_certificate sc1 where sc1.user_id=u.user_id group by sc1.qualification_kind ) )as general_specialty
, u.*,ur.default_role,ur.role_1,ur.role_2,ur.role_3,ur.role_4,ur.role_5,ur.role_6,ur.role_7
from ta_user u,employee e,TA_USER_ROLES ur
where u.account_enabled='1' and u.emp_id = e.empl_code(+) and ur.user_id=u.user_id(+)]]></SQLQuery>
<ViewAttribute
Name="Empname"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="255"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="EMPNAME"
Expression="EMPNAME"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Empname_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="GeneralSpecialty"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="GENERAL_SPECIALTY"
Expression="GENERAL_SPECIALTY"
SQLType="VARCHAR"
LOVName="ar_LOV_GeneralSpecialty"
LOVFinder="GeneralSpecialtySwitcher">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="choice"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.GeneralSpecialty_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="UserId"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Type="java.lang.Integer"
ColumnType="NUMBER"
AliasName="USER_ID"
Expression="USER_ID"
SQLType="INTEGER"/>
<ViewAttribute
Name="FullName"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="FULL_NAME"
Expression="FULL_NAME"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.FullName_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="FullNameEn"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="FULL_NAME_EN"
Expression="FULL_NAME_EN"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.FullNameEn_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="TitleSalutation"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="TITLE_SALUTATION"
Expression="TITLE_SALUTATION"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.TitleSalutation_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Nationality"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="3"
Scale="0"
Type="java.lang.Integer"
ColumnType="NUMBER"
AliasName="NATIONALITY"
Expression="NATIONALITY"
SQLType="INTEGER"
LOVName="ar_male_LOV_Nationality"
LOVFinder="NationalitySwitcher">
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="choice"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Nationality_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Gender"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="1"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="GENDER"
Expression="GENDER"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="1"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Gender_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Employer"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="100"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="EMPLOYER"
Expression="EMPLOYER"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="100"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Employer_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="CurrentJob"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CURRENT_JOB"
Expression="CURRENT_JOB"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.CurrentJob_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Degree"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="DEGREE"
Expression="DEGREE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Degree_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Department"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="DEPARTMENT"
Expression="DEPARTMENT"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Department_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="ScientificDegree"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="4"
Scale="0"
Type="java.lang.Integer"
ColumnType="NUMBER"
AliasName="SCIENTIFIC_DEGREE"
Expression="SCIENTIFIC_DEGREE"
SQLType="INTEGER"
LOVName="ar_LOV_ScientificDegree"
LOVFinder="ScientificDegreeSwitcher">
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.ScientificDegree_LABEL"/>
<CONTROLTYPE
Value="choice"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="ScientificQualification"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="SCIENTIFIC_QUALIFICATION"
Expression="SCIENTIFIC_QUALIFICATION"
SQLType="VARCHAR"
LOVName="ar_LOV_ScientificQualification"
LOVFinder="ScientificQualificationSwitcher">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.ScientificQualification_LABEL"/>
<CONTROLTYPE
Value="choice"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Country"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="3"
Scale="0"
Type="java.lang.Integer"
ColumnType="NUMBER"
AliasName="COUNTRY"
Expression="COUNTRY"
SQLType="INTEGER"
LOVName="ar_LOV_Country"
LOVFinder="CountrySwitcher">
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="choice"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Country_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="City"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CITY"
Expression="CITY"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.City_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="ZipCode"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="ZIP_CODE"
Expression="ZIP_CODE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.ZipCode_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="POBox"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="P_O_BOX"
Expression="P_O_BOX"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.POBox_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="CurrentAddress"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="100"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CURRENT_ADDRESS"
Expression="CURRENT_ADDRESS"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="100"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.CurrentAddress_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="WorkPhone"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="WORK_PHONE"
Expression="WORK_PHONE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.WorkPhone_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="HomePhone"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="HOME_PHONE"
Expression="HOME_PHONE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.HomePhone_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="CellPhone"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CELL_PHONE"
Expression="CELL_PHONE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.CellPhone_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Fax"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="FAX"
Expression="FAX"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Fax_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="PermanentAddress"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="100"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="PERMANENT_ADDRESS"
Expression="PERMANENT_ADDRESS"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="100"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.PermanentAddress_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Email"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="EMAIL"
Expression="EMAIL"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Email_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Password"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="PASSWORD"
Expression="PASSWORD"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="PastArbitration"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="1"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="PAST_ARBITRATION"
Expression="PAST_ARBITRATION"
SQLType="VARCHAR"
LOVName="LOV_PastArbitration">
<DesignTime>
<Attr Name="_DisplaySize" Value="1"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="radio"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.PastArbitration_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="PastCooperation"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="1"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="PAST_COOPERATION"
Expression="PAST_COOPERATION"
SQLType="VARCHAR"
LOVName="LOV_PastCooperation">
<DesignTime>
<Attr Name="_DisplaySize" Value="1"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="radio"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.PastCooperation_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="FutureCooperation"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="1"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="FUTURE_COOPERATION"
Expression="FUTURE_COOPERATION"
SQLType="VARCHAR"
LOVName="LOV_FutureCooperation">
<DesignTime>
<Attr Name="_DisplaySize" Value="1"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="radio"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.FutureCooperation_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="EmpId"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="EMP_ID"
Expression="EMP_ID"
SQLType="VARCHAR"
IsQueriable="false">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="LoginName"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="LOGIN_NAME"
Expression="LOGIN_NAME"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
</ViewAttribute>

Unit 0ORDER_CURR for key figure 0ORDER_VAL is not recognized in the update

Hello Experts,
I am getting the below warning while I am installing the business content for Purchasing Cube 0PUR_C04 update Rules
"Unit 0ORDER_CURR for key figure 0ORDER_VAL is not recognized in the update rules"
And the business content activation is terminated.
Can you please let me know how i could resolve.
Thanks
Padma

Hi Amrit,
Nice to know Toons suggestions have helped you to resolve your issue.
There is one bug waiting to explode soon although.
Check this out after your last insert
INSERT INTO mth_equipment_shifts_d(equipment_fk_key,availability_date,shift_workday_fk_key,from_date,To_Date,line_num,availability_flag,entity_type,creation_date,last_update_date,creation_system_id,
last_update_system_id) (
SELECT b.entity_pk_key entity_pk_key,a.shift_date shift_date,a.shift_workday_pk_key shift_workday_fk_key,Trunc(a.shift_date) from_date,Trunc(a.shift_date) To_Date,1 line_num,'Y',
b.entity_type entity_type,SYSDATE,SYSDATE,-1,-99999
--INTO l_site_id,l_entity_pk_key,l_entity_name,l_entity_type,l_production_entity,
--l_shift_workday_pk_key,l1_shift_date,l_from_date,l_to_date
FROM mth_workday_shifts_d a ,
SELECT plant_fk_key site_id, entity_pk_key, entity_name, entity_type, production_entity production_entity
FROM mth.mth_equip_entities_mst
UNION ALL
SELECT plant_pk_key site_id, plant_pk_key entity_pk_key, plant_name entity_name, 'Site', production_site production_entity
FROM mth.mth_plants_d
UNION ALL
SELECT plant_fk_key site_id, resource_pk_key entity_pk_key, resource_name entity_name, 'Resource', production_resource production_entity
FROM mth.mth_resources_d
UNION ALL
SELECT plant_fk_key site_id, equipment_pk_key entity_pk_key, equipment_name entity_name, 'Equipment', production_equipment production_entity
FROM mth.mth_equipments_d
)b
WHERE b.site_id = a.plant_fk_key
AND a.plant_fk_key=l_plant_fk_key
AND shift_date>=l_start_date
AND shift_date<=l_end_date
AND UPPER(a.shift_type)='BOTH'
AND a.FROM_DATE IS NULL
AND a .To_Date IS NULL
--AND a.line_num=NULL
AND a.shift_num IS NULL
There is no COMMIT
You may want to check that out.
Cheers!!!
Bhushan

Can we give the more than 2 decimals for key figure

Hi,
can we give the more than 2 decimals for key figure while entering the manuall planning.
Ex:There is keyfigure called 0DEBIT which is having values as 1000.00 USD, 137688.00 USD.which are displaying bydefault whenever we entered the values while planing or File.
what Customer is asking us 0DEBIT keyfigure values should be display 1000.0000 USD, 137688.0000 USD. ( added two more decimals for keyfigure value).
Can we maintained decimals more than two.........?
Thanks,
Ven
Edited by: vanarasi venkat on Apr 13, 2009 4:35 AM

Hi,
Though you can specify the no of decimal places for each keyfigure in the 2nd screen of layout builder but say if you have entered scaling factor as 1 and decimal places as 4 and user enters value as 15.2546, then in the cube it will be stored as 15.25 because physically the keyfigure can store values only upto two decimal places, so it will round up the figure to two decimal places. But, if you specify the scaling factor as 2 and decimal places as 4 than value 15.2546 will be stored in the cube as 1525.46.
If above explanation doesn't help you i finding out the solution for your requirement than you have to either change the number of decimal places in the keyfigure or tell user that technically it's not possible in BPS.
Regards,
Deepti

Virtual Key Figures in RSR_OLAP_BADI not re-calculated correctly

Hello BW/BI Experts!
    Please clarify why is the COMPUTE METHOD of RSR_OLAP_BADI not triggered or executed
if you remove a drilldown to a certain characteristic.
    For instance, my query is drilled down by customer and material by default. Upon
opening the query and after entering the appropriate selections, the virtual key figures
that I have used in the query are correct .
    However, if you remove the drilldown by customer(for example), the virtual key figure
is not re-computed. I was able to verify this by setting break-point in the COMPUTE
method. However, if you drilldown by customer again, the re-calculation for the virtual
key figure is correct likewise, if you refresh query, the results will be correct.
     Is this really the normal behavior of the said BADI? Why is it unstable? If I will
use RSR00002(the user exit version), will I not have the same issue?
Thanks in Advance!

If I will use RSR00002(the user exit version), will I not have the same issue?
I dont see any reason why this wouldnt behave the same way.
I assume from ur post that you need to read ur customer and material to derive ur virtual KF in the BAdi. When you remove the drilldown the customer value is no more available for the exit to calculate the KF, thats when it throws out a wrong number. I havent seen a work around for this. Please update the form if you find a solution to get the customer values into the exit even after removing the drill down.

Key figure description for key figure YKFRFCFGD does not exist in liveCache

Dear SAP Gurus,
We have upgraded our APO 3.10 to SCM 5.1,
Sopport Pack details:
SAP_BASIS 700 16
SAP_ABA 700 16
ST-PI 2005_1_700 6
PI_BASIS2006_1_700 6
SAP_BW 700 18
SAP_AP 700 13
LCAPPS 2006_700 4
EA-IPPE 400 13
SCEMSRV 510 7
SCM 510 6
SCMBPLUS 510 6
SCMEWM 510 6
SCMSNC 510 6
SCM_BASIS 510 9
BI_CONT 703 10
QIE 200 5
ST-A/PI 01K_SCM500 0
and Live cache 7.4.02.29 from to 7.7.03.23
We facing following issue during APO operation in live cache.
Error details:
"Characteristic combinations with liveCache anchor but without time series"
"Key figure description for key figure YKFRFCFGD does not exist in liveCache"
"There is an inconsisteny between the key figure descriptions in liveCache and in the database. The key figure description of key figure YKFRFCFGD exists in the database but not in liveCache."
Kindly help me out on this.

Please execute Live cache consistecny check:
for Planning area , check all the option.
/SAPAPO/TS_LCM_CONS_CHECK
MPOS:
/SAPAPO/TS_PSTRU_CONS_CHECK
Manish

The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

Hi Luis Fernando Garcia,
Thanks for using Apple Support Communities. This article has troubleshooting for keys not working on your keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sureMouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, seeUnable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Cheers,
- Ari

What makes this a Key Figure Model (and not Account Model in BW) ?

I am reviewing a document on Key Figure Model versus Account Model in BW.
this example is said to be "Key Figure" Model
Customer     Revenue     Deductions     COGS
A            100 DM      390 DM         50 DM
What makes this a Key Figure Model (and not Account Model in BW)

Hi Amanda,
Consider the simplified a company income statement:
Sales
COGS
-- Gross profits
Selling and Administrative expense
Deperication expense
-- Operating profit
Interest expense
-- Earnings before taxes
Taxes
-- Earnings after taxes
Each of this lines is represented in BW as a key figure (lines with '--' represented as calculated KFs).
Different persons or companies may use their own details of income statement. For example, someone want to see instead of one line "Selling and Administrative expense" two - separatly selling and administrative expenses, or even break down of these expenses by category. In the KF model every new introducted line should be represented by a new KF.
In the Account Model every line is represented by one KF only. Let name it as 'Amount'. Another characteristic is telling us what kind of amount it is. Imagine that you have accounting trial balance that lists accounts, starting and ending balances, and debit and credit turnovers for each account.
An accountant will tell you that a credit turnover in account #XXXX represent the company revenue (sales), a debit turnover in account #YYYY - cost of goods sold etc.
Simplified inflow of transactional data will consist of:
Account Amount
XXXX    -12345
YYYY    8765
etc.
In this model (assuming that you load data for all accounts) you can easily change the scheme of calculations and their presentations (groupping, regroupping etc.) in reports without creating new KFs.
In your example you provide a KF model because every distinct type of amounts is represented by its own KF.
Best regards,
Eugene
Message was edited by: Eugene Khusainov
Message was edited by: Eugene Khusainov

You need to have xlsm where you can access the macro in numbers. this is frustrating that the idea of Numbers is to make it like Excel yet you dont have this capability. Question is, when will it happen or will it happen????

You need to have xlsm where you can access the macro in numbers. this is frustrating that the idea of Numbers is to make it like Excel yet you dont have this capability. Question is, when will it happen or will it happen????

Hi brev,
Several points here:
1. Although there is some compatibility between Numbers and Excel files, I doubt very much that "the idea of Numbers is to make it like Excel." The two applications share some similarities, but also have several differences.
2. Your Question is unanswerable in this forum. Apple does not generally reveal future development plans or schedules for its applications, and anyone with knowledge of those plans will be bound by a non-disclosure agreement.
3. "You need to" implies a feature request. If you want to request that a feature be added to a future version of Numbers, that request is better made directly to Apple, via the Feedback channel, than here, where the readers and responders are all users of the software, not developers. From the application menu (the "Numbers" menu in Numbers), choose Provide Numbers Feedback, then make your request for a feature to be added to Numbers.
Meantime, if you absolutely need the macros capabilities of MS Excel, try one of the Office clones—OpenOffice.org, LibreOffice, or NeoOffice, which may offer macro support, or use the Mac version of Excel itself.
Regards,
Barry

"The certificate chain was issued by an authority that is not trusted" when migrating to SQL 2012

Environment:
1 Primary Site (USSCCM-Site.domain.com)
1 CAS (USSCCM-CAS.domain.com)
SQL 2008 R2 (USSCCM-CAS.domain.com)
SQL 2012 SP1 CU6 (USSQL12.domain.com)
Issue:
We were successfully able to migrate the CAS to the new SQL 2012 server, almost without incident. When attempting to migrate the Site instance however, we are getting errors. Screenshot below.
Attached is a copy of the log. But below is a highlight of what I think are the errors… It appears that either SQL or SCCM doesn’t like a certificate somewhere, but it is contradicting because the logs say that it has successfully tested connection to SQL.
I am lost.
Logs stating it can connect successfully to SQL
Machine certificate has been created successfully on server USSQL12.domain.com.        Configuration Manager Setup                10/21/2013 10:20:10
AM               2100 (0x0834)
Deinstalled service SMS_SERVER_BOOTSTRAP_USSCCM-Site.domain.com_SMS_SQL_SERVER on USSQL12.domain.com. Configuration Manager Setup    10/21/2013 10:20:10 AM
2100 (0x0834)
SQL Server instance [sccmsite] is already running under the certificate with thumbprint[f671be844bf39dec7e7fdd725dc30e225991f28a].       Configuration Manager Setup    10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: Testing SQL Server [USSQL12.domain.com] connection ...                Configuration Manager Setup    10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: SQL Connection succeeded. Connection: USSQL12.domain.com SCCMSITE\MASTER, Type: Unsecure                Configuration Manager Setup    10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: Tested SQL Server [USSQL12.domain.com] connection successfully. Any preceding SQL connection errors may be safely ignored.            Configuration Manager Setup    10/21/2013
10:20:10 AM               2100 (0x0834)
INFO: Certificate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
Configuration Manager Setup    10/21/2013 10:20:10 AM               2100 (0x0834)
INFO: Created SQL Server machine certificate for Server [USSQL12.domain.com] successfully.    Configuration Manager Setup 10/21/2013 10:20:10 AM               2100 (0x0834)
INFO: Configuration Manager Setup - Application Shutdown       Configuration Manager Setup    10/21/2013 10:20:10 AM         2100 (0x0834)
INFO: Running SQL Server test query.    Configuration Manager Setup    10/21/2013 10:20:10 AM               2100 (0x0834)
INFO: SQL Connection succeeded. Connection: USSQL12.domain.com SCCMSITE\MASTER, Type: Secure                Configuration Manager Setup    10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: SQL Server Test query succeeded.              Configuration Manager Setup    10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: SQLInstance Name: sccmsite         Configuration Manager Setup    10/21/2013 10:20:10 AM               2100 (0x0834)
INFO: SQL Server version detected is 11.0, 11.0.3381.0 (SP1).      Configuration Manager Setup    10/21/2013 10:20:10 AM         2100 (0x0834)
Logs saying certificate is not trusted
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted.        Configuration Manager Setup
10/21/2013 10:20:49 AM                2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection                Configuration Manager Setup    10/21/2013 10:20:49
AM               2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection         Configuration Manager Setup    10/21/2013 10:20:49 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS.    Configuration Manager Setup                10/21/2013 10:20:49 AM
2100 (0x0834)
INFO: SQL Connection failed. Connection: CCAR_DB_ACCESS, Type: Secure         Configuration Manager Setup                10/21/2013 10:20:49
AM               2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup    10/21/2013 10:20:52 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted.        Configuration Manager Setup
10/21/2013 10:20:52 AM                2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection                Configuration Manager Setup    10/21/2013 10:20:52
AM               2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection         Configuration Manager Setup    10/21/2013 10:20:52 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS.    Configuration Manager Setup                10/21/2013 10:20:52 AM
2100 (0x0834)
INFO: SQL Connection failed. Connection: CCAR_DB_ACCESS, Type: Secure         Configuration Manager Setup                10/21/2013 10:20:52
AM               2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup    10/21/2013 10:20:55 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted.        Configuration Manager Setup
10/21/2013 10:20:55 AM                2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection                Configuration Manager Setup    10/21/2013 10:20:55
AM               2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection         Configuration Manager Setup    10/21/2013 10:20:55 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS.    Configuration Manager Setup                10/21/2013 10:20:55 AM
2100 (0x0834)
INFO: SQL Connection failed. Connection: CCAR_DB_ACCESS, Type: Secure         Configuration Manager Setup                10/21/2013 10:20:55
AM               2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup    10/21/2013 10:20:58 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted.        Configuration Manager Setup
10/21/2013 10:20:58 AM                2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection                Configuration Manager Setup    10/21/2013 10:20:58
AM               2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection         Configuration Manager Setup    10/21/2013 10:20:58 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS.    Configuration Manager Setup                10/21/2013 10:20:58 AM
2100 (0x0834)
INFO: SQL Connection failed. Connection: CCAR_DB_ACCESS, Type: Secure         Configuration Manager Setup                10/21/2013 10:20:58
AM               2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup    10/21/2013 10:21:01 AM
2100 (0x0834)
More logs saying cert is not trusted
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup    10/21/2013 10:21:20 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted.        Configuration Manager Setup
10/21/2013 10:21:20 AM                2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection                Configuration Manager Setup    10/21/2013 10:21:20
AM               2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection         Configuration Manager Setup    10/21/2013 10:21:20 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS.    Configuration Manager Setup                10/21/2013 10:21:20 AM
2100 (0x0834)
INFO: Updated the site control information on the SQL Server USSQL12.domain.com.    Configuration Manager Setup                10/21/2013 10:21:39 AM
2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup    10/21/2013 10:21:39 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted.        Configuration Manager Setup
10/21/2013 10:21:39 AM                2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection                Configuration Manager Setup    10/21/2013 10:21:39
AM               2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection         Configuration Manager Setup    10/21/2013 10:21:39 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS.    Configuration Manager Setup                10/21/2013 10:21:39 AM
2100 (0x0834)
CSiteSettings::WriteActualSCFToDatabase: Failed to get SQL connection                Configuration Manager Setup
10/21/2013 10:21:39 AM               2100 (0x0834)
CSiteSettings::WriteActualSCFToDatabaseForNewSite: WriteActualSCFToDatabase(USA) returns 0x87D20002                Configuration Manager Setup    10/21/2013 10:21:39
AM               2100 (0x0834)
ERROR: Failed to insert the recovery site control image to the parent database. Configuration Manager Setup                10/21/2013 10:21:39 AM
2100 (0x0834)
Troubleshooting:
I have read on a few articles of other people having this issue that states to find the certificate on SQL 2012 that’s being used and export it to the SCCM server – which I’ve done.
http://damianflynn.com/2012/08/22/sccm-2012-and-sql-certificates/
http://trevorsullivan.net/2013/05/16/configmgr-2012-sp1-remote-sql-connectivity-problem/
http://scug.be/sccm/2012/09/19/configmgr-2012-rtm-sp1-and-remote-management-points-not-healthy-when-running-configmgr-db-on-a-sql-cluster/
-Brad

Hi,
How about importing certificate in the personal folder under SQL server computer account into SCCM server computer account or SCCM server service account? That certificate is for SQL Server Identification. And you could
set the value of the ForceEncryption option to NO. (SQL Server Configuration Manager->SQL Server Network Configuration->
Protocols for <server instance>->Properties)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error code 265: The certificate chain was issued by an authority that is not trusted.

We are in the process of trying to set up a wireless network that uses NPS servers to authenticate domain users with computers that are not on our domain (BYOD).
We are using a valid, wildcard SSL (with intermediate certificates) to authenticate via PEAP. The certificate was issued by Godaddy.
When trying to connect, we are getting the authentication request.
The result of a connection attempt is no connection with an event log error code of - “265: The certificate chain was issued by an authority that is not trusted.”
We have tried ensuring that the certificates are in the correct containers on the respective NPS servers: “Certificates\Personal\Certificates” With the intermediate certificates located: “Certificates/Intermediate Certification Authorities”
All these attempts have proven fruitless. Any assistance or direction would be very much appreciated.

Hi,
Do you import the intermediate certificate in the right account? It should be imported in the Computer Account.
Have you imported the intermediate certificate in your client? Client need it to validate the certificate of your NPS server.
Here is a similar thread in which Greg has explained this issue in detail.
http://social.technet.microsoft.com/Forums/en-US/b770fcf6-d1e9-4aac-9005-62cb5ff6d485/the-certificate-chain-was-issued-by-an-authority-that-is-not-trusted?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support

"one or more of the items in your selection contains Aperture albums that are not supported in iphoto".

I have some folders in iPhoto called 'Recovered Folder'. When I try to delete them I get this message: "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
I don't use Aperture (did install it to try it out), and have deleted Aperture App from my Mac.
How can I get rid of these fodlers?

i finally figured this out:
fyi, iphoto and aperture can now share (i.e., access) the same library. apple details it here:
http://support.apple.com/kb/HT5260?viewlocale=en_US&locale=en_US
i use both iphoto and aperture, and i suspect something went amiss, at some point, while aperture was accessing my iphoto library.
this is how i fixed the problem:
i launched aperture, then (per the instructions linked above) switched to (i.e., accessed) my iphoto library. i was then able to delete the "recovered folder" and the album it contained. i then quit aperture and relaunched iphoto.
NOTE: at that time, although i expected the "recovered folder" to be gone, it was still present. but this time, i was able to delete the folder from within iphoto without the "contains aperture items" error message.
(Sparky030405, i realize you've since deleted aperture. while i can't say my method is the *only* way to solve this problem, it's the way i was able to solve it. so, you might consider reinstalling aperture in order to delete the folder, then uninstalling aperture, once again.)

Hacked Message: Your Apple ID was just used to download Podcasts from the App Store on a computer or device that had not previously been associated with that Apple ID

So I just got a message from Apple saying
"Your Apple ID was just used to download Podcasts from the App Store on a computer or device that had not previously been associated with that Apple ID"
I am new to Apple products and signed up to the app store about an hour before but have not downloaded any apps yet.
I also turned on iCloud Drive.
Neither of these are Podcasts and I do not have any Podcasts on my device.
The message is a really poor warning, it could for instance list the IP address which would immediately tell me if it was me.
It could list what type of device it was.
It could list what Podcast was downloaded.
But no, just some random message, probably generated by the really bad default iPhone settings that put ease of use before security.
I have a long complex password that I do not want ot have to change just because Apple generates a stupid message.
On Google you have a log of all logins and devices, is there something similar with Apple, so I can figure this out?

Kroll17 wrote:
I don't know, I thought it was pretty clear
"was just used to download Podcasts from the App Store"
it said it was used to download a Podcast from the App Store
I have not down downloaded any podcasts and there are no podcasts in the podcasts app, of course if Apple were to list the podcast that was downloaded, the IP address and the device it might help one dismiss the message.
I am running the latest v8.1.1 although how the version of my OS related to a message generated by Apple servers is beyond me, unless my device is not authenticating properly so Apple thinks I am someone else but then as I have not downloaded any Podcasts that would not seem to be the issue.
It does NOT say you downloaded a podcast. First, podcasts are not downloaded from the App Store; they are downloaded from the iTunes store.
It's very clear to me; the app named "Podcasts" was downloaded, not a podcast. "Podcasts" is a app provided by Apple for managing and downloading podcasts.

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

Everytime I purchase using iTunes on my home computer it asks me to verify my c/card, and states "Your Apple ID, ..., was just used to purchase ... from the iTunes Store on a computer or device that had not previously been associated with that Apple ID.

When i use my laptop to make an iTunes store purchase, it always asks me to verify my account details by entering my credit card verification number. After i do this i then receive an email stating "Your Apple ID, ..., was just used to purchase ... from the iTunes Store on a computer or device that had not previously been associated with that Apple ID."
My Laptop is my home device and apart from purchasing app's on my iphone 4, i only use my laptop to make itunes purchases.

I'm having a similar problem. I had previously (over a year ago) purchased 2 episodes of Law & Order. Then about 2 months ago, I purchased the 3rd season of Sons of Anarchy. When I downloaded these episodes to my iPad, about a dozen full seasons of various shows popped up, too. No money was removed from my iTunes account & theses particular shows aren't in my iTunes library on my desktop. I've tried every which way to delete them from my ipad, but can't. I went to the Apple store & they suggested I contact expresslane.apple.com for help. I submitted my problem, via email Friday, as they asked, but have not received any response. Any suggestions on how to get rid of these "phantoms?".

The macro attempted to modify a key figure that is not locked

Similar Messages

Maybe you are looking for