The main window of third page will not display the text element

Hey, smartform guru,
I am working on the smartform to print PO data.
The smartform has first page and next page as usual.
I created a third page P_TERMS to print the terms and conditions for PO printout.
I used commend node to assign the page P_TERMS as the "Go to new page" and it did go to the P_TERMS page but the text element will not print in the main window in P_TERMS page.
The text element will print in the secondary window.Since the terams and conditions are 4 pages long, I expected it to print in the main window, so I do not have to define several extra pages to print them.
Any idea?
Thanks in advance!
Fisher Li

Hi Fisher,
Unfortunately, In a smartform, only single main window is continued to all pages even though you can declare windows under each page as main window, but it actually acts as the same window for all pages. It just means that if text from 1st page is overflowed, it will continue to the next page with main window.
Command line to go to next page will create an extra page but since text is not flowed in main window, it won't print the text element you have included in main window on third page.
The solution to your problem as I see is that either you include your terms and conditions in the main window of your first page and just before your text element for T&Cs, use Command to go to third page.
Hope it helps.
Ravi

Similar Messages

  • On the etap hotel site, the map page will not display

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/780195]</blockquote><br>
    On the etap hotel site www.etaphotel , when i click on map, nothing is displayed. The page just has a space on it.

    Hi Fisher,
    Unfortunately, In a smartform, only single main window is continued to all pages even though you can declare windows under each page as main window, but it actually acts as the same window for all pages. It just means that if text from 1st page is overflowed, it will continue to the next page with main window.
    Command line to go to next page will create an extra page but since text is not flowed in main window, it won't print the text element you have included in main window on third page.
    The solution to your problem as I see is that either you include your terms and conditions in the main window of your first page and just before your text element for T&Cs, use Command to go to third page.
    Hope it helps.
    Ravi

  • Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

    Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • Windows 7 internet security will not allow the installation of Flash Player 17 Update

    Windows 7 internet security will not allow the installation of the Flash Player 17 update.  I have tried the direct install using the IE_AX update without success.

    Hi,
    Thanks for the screenshot.  It's very helpful. Essentially, this is an issue with the internet security settings on your machine (Internet Explorer > Internet Options > Security), and not a Flash Player issue.  I Googled "internet security settings prevented one or more files from opening' and it returned numerous hits.  I'm posting a few for you, however, I'm not endorsing any of them.  I recommend you search your self and select one you feel comfortable with.
    https://support.microsoft.com/en-us/kb/2588679
    https://social.technet.microsoft.com/Forums/windows/en-US/6bd973a1-38b5-4ad2-bcf5-e90be18c c64b/your-internet-security-settings-prevented-one-or-more-files-from-being-opened?forum=w 7itproinstall
    How to fix: These files can’t be opened. Your Internet security settings prevented one or more files from being opened. …
    and there are many more.
    Maria

  • TS3212 I'm trying to download i tunes for windows 8 but it will not complete the process?

    I'm trying to download i tunes for windows 8 but it will not complete the process

    does it give you an error message?

  • I have updated Firefox to 8.0.1 but the main screen still says " You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" What is the problem?

    I downloaded Firefox Setup 8.0.1.exe from the website to my desktop and opened it as an administrator. The available choice (once opened) was to upgrade. When the process was complete my version of Firefox was identified as 8.0.1 but the main screen still said - "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!"

    This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained.
    Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

  • Oem web page will not display after O/S dst patch

    Hello,
    The Grid web page will not display after we DST patch for the o/s.
    All below start fine without any errors:
    emctl start oms
    emctl start iasconsole
    opmnctl startall
    emctl start agent
    The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
    What logs should I be looking at to figure why the web page is not displaying? Thank you.

    Provide the output of these comands:
    $OMS_HOME/bin/emctl status oms
    $OMS_HOME/opmn/bin/opmnctl status
    $AGENT_HOME/bin/emctl status agent
    $DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
    SELECT STATUS FROM V$INSTANCE;
    EOF
    $DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
    Regards

  • Pages will only display the first page of text.

    Pages will only display the first page of text. New pages are created as usual but blank and pages are visible through quick views. Reinstalling does not fix the problem, I don't know if it is an issue with settings. Pages v 4.1 on OS 10.7.4. Running on new macbook with retina.
    This is apparently a retina issue. Update hopefully soon

    You have not said but it sounds like you are using a Macbook pro with retina display.
    Pages is exhibiting all sorts of problems with the Retina display which Apple is supposedly working on.
    Peter

  • Communicator 9300i will not display the Blackberry...

    I have Communication 9300i which I have installed the Blackberry Connect software on to but it does not display the Blackberry serivce in the messaging section.
    I have unistalled the software a couple of times and reinstalled it, but to no avail.
    Any advice please.

    I figured out that the score editor is very unstable. When I open the score editor, and it shows the notes for the region I clicked on, I now know to be sure to only click on the white, lit area of the stave to increase the view to either multiples of the same region, or the full score. If I click on the gray area, then the whole thing goes black and "create a MIDI region" appears, and the score editor will no longer come back. Also, do not ever click on a region when the score editor is open, or the whole thing goes black again.
    The score editor is very unstable, and must be opened and closed with care. Once the "create a MIDI region" prompt comes up, it is impossible to get the score editor to open again, unless you open the specific score editor window, but that will not display the full score.

  • I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see.  The reason is that Quick Time will not support the video.  What can I do to be able to get these videos?

    I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see.  The reason is that Quick Time will not support the video.  What can I do to be able to get these videos?  I have all ready download Adobe Flash Player and installed it but it has not effect.

    Get Flip4Mac (for Windows Media videos):
    http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
    And Perian for everything else:
    http://perian.org/
    You should be able to play most videos with QuickTime player once both are installed.

  • When I place a clip in the timeline and try to watch it, the viewer says "Unrendered" and it will not show the clip

    When I place a clip in the timeline and try to watch it, the viewer says "Unrendered" and it will not show the clip. What do I need to do to fix this?

    Option 1: Render the clip in FCE then watch it.
    Option 2 (preferred): Convert the clip so it will match your Sequence settings in FCE prior to importing the clip into your project.  It will not need rendering if converted properly.
    -DH

  • One of the pages in my website will not display the Amazon links to books I sell. Only one book, wiich is not on Amazon displays on the page. On Internet Explorer, all my books display. why?

    Ever since converting my website to WordPress the "Recommended Reading" page doesn't display the book I listed that link to Amazon. Only one book linked to another website displays, but not of the Amazon Books.
    This does not happen on Internet Explorer. I have asked this question last week but have not received a response.
    Can you help? Go to: www.transitionexecs.com and click on "recommended reading" to see what I mean.

    Do you have any ad-blocking software?
    Those links have ad in the url that might trigger such software.
    See:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Refreshing page will not update the content referred JavaScript file of html in WebKit on Mac OS X 10.10.2

    In our project, we use WebKit framework to visit a local HTML file which contains reference to JavaScript file. Our users can modify the JavaScript file and then refresh the page to see the change which works fine until we come up to Mac OS X 10.10.2. It seems that the referred JavaScript file is cached and can be never updated except restarting application. We have already set cache policy to “NSURLRequestReloadIgnoringLocalCacheData”. However it didn’t work.
    Besides there is a similar issue on Safari of Mac OS X 10.10.2. I find that refreshing the HTML in Safari will not renew the content of referred JavaScript file after modifying it. I have tried to check "disable caches" option, but it still didn't work. The behavior is different from OS X 10.10.1. Maybe it is a defect on OS X 10.10.2. Did anyone meet such issue? Is there any solution?

    The web process user is "_www"… that's without the " and with the _.

  • I bought the metallica collection and my ipod will not download the songs,it just stops and go back to the home screen.

    my ipod will not download the metallica collection i bought. its 182 songs. i have the automatic download on. everything else will download. is it because it is so many songs? the loading icon appears, but then it just exits out to the ipods main screen. is there anything i can do? your help would be very grateful!!!!

    Try redownloading on computer and sync.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Hyperlink which refer to a Visio drawing will not display the Visio drawing inside the browser

    I have a site collection of type "Publishing>>Enterprise wiki", and i have the Visio Graphics service application enabled (i have enterprise SP license). now if i open the document library , and i click on the Visio diagram
    the diagram will open inside the browser as intended :-
    But the problem i am facing is as follow,if i edit a page , add a link, select to "chose from SharePoint" and i browse for the Visio drawing as follow:-
    Then when users click on the link, the Visio diagram will not be shown inside the browser instead an open dialog will be displayed as follow:-
    So can anyone advice how to force the hyperlink to have the same effect as clicking on the diagram from the document library , where the visio drawing will be shown directly inside the browser, instead of prompting an open dialog box ?

    Can you please check "Library settings" -> "Advance settings" and what is the settings
    Opening Documents in the Browser
    Specify whether browser-enabled documents should be opened in the client or browser by default when a user clicks on them. If the client application is unavailable, the document will
    always be opened in the browser.
    Default open behavior for browser-enabled documents:
    Open in the client application 
       X Open in the browser 
    Use the server default (Open in the browser)
    Shouldn't be "Client application"
    Regards Sudip Misra [email protected] +1-412-237-5435 Pittsburgh, PA
    those setting apply only when clicking on a document directly inside the document library, but they do not have any effect when adding hyperlinks to the documents...

Maybe you are looking for

  • Basic Java Concepts

    I'm a Java novice, trying to learn it along with Jdeveloper side by side. My learning of the Java fundamental concepts led to the below understanding, please see if my understanding is not correct in any way. The fundamental concept with Java is a CL

  • Using a different language in individual apps

    Here's what I want to do and you used to be able to select the language in previous versions of OS X. I want to run iTunes, iCal, and a few others in Japanese while I keep the main system in English. Before you could do cmd-I on the icon to bring up

  • OID multiple realms log in issue

    Hi All, I am using OID in a prototype to store users in different organizations. I have done this by creating multiple realms. I am configuring OID with OBIEE so users in OID can log into OBIEE. I am facing an issue when 2 users have the same userid

  • Best oracle RAC book

    can any one suggest me a best oracle book beyond documentation... sure, we can understand all the concepts through the documentation. have gone through clusterware administration and rac administration twice. can any one tell me best book for trouble

  • Firefox wont display search results on certain engines (Google, yahoo). IE works fine and Bing also displays

    For the past 2 days, Firefox wont display search results on Google or Yahoo. Tried Bing it worked fine, tried Internet Explorer and it worked fine. All that gets displayed is a blank page, no errors or anything like that.