The next page in not displaying in the SAP Script

Hello,
I had one SAP script. There were two pages in the script and i mentioned the next page also for the FIRST and NEXT page as
First - next page --> next
and next -- next page --> next
Now, I am having 3 items which needs to be gets displayed using SAP script.
The first two items displayed properly but the third item is not getting displayed, as of the size of main window is small.
Whenver i am increasing the size of main window the third item gets displayed propely.
But i guess whenever the data will get overflow in main window then it should gets displayed in the next page, this is not happening in my case.
Can any one tell me, how to display the next page whenver the data will get overflow in main window?
Please help me with this.
Thanks in advance
Regards,
Darshana

Hi Darshana,
if you use text element for the item output, you will need same text element on NEXT page. Check for Typos. Switch on sapscript debugger and check what happens.
Regards,
Clemens

Similar Messages

Copy is breaking to next page and not flowing to the bottom of the text box

I have a document where text is styled with style sheets and overrides are cleared but the text breaks to the next page rather than flowing to the bottom of the text box. I've had this issue several times in the past but have never figured out how to correct the issue.

Thanks for the suggestion. I have invisibles showing but I'm not seeing a Word break character. Do Word break characters show up in ID differently from ID break characters. I'm attaching a screenshot to show what I'm dealing with.
I made sure the keep options are completely unchecked.

How do I stop automatic loading of the next page as I scroll to the bottom of an internet page that has a number of pages?

When I search with Google, as I scroll to near the bottom of the page, the next page of results automatically loads. I can never get to and use the similar searches, or "Searches related to ***", which are at the bottom of the page, as the next page loads and focuses at the top of that next page. Also, there is a bar with the page number, and a field with a "Jump to" command with a pop down arrow with page numbers, and up and down arrows beside it which go up or down one page if used.
This does not happen with, say, Bing, nor if I use Int Expl (aagh).
I have no autopage type of add-ons, or plugins.. I may have had an add-on at one time. There are a bunch of autopager "strings", or lines, in about:config. How do you remove them, if that is the problem?
How do I stop this from happening? It is extremely annoying.
Thanks,
SK

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

The portlet name is not displayed in the portlet drop down list ?

Hi,
I use Sun Java System Portal Server 6 2005Q4 for windows 2000 server , use the following command to deployo portlet,
I am not sure if I successfully deploy the portlet?
pdeploy deploy -u amAdmin -w amadmin -p amadmin -d "cn=amldapuser,ou=DSAME Users,dc=icheng,dc=com" C:\Sun\PortalServer\tmp\portlet\portletsamples.war
The message I got after execute the pdeploy command is =>
Deploys the portlet war file and inserts the provider into display profile..
OPTIONS
--help Help message (false)
-u --runasdn UID Bind DN (none)
-w --password Password (none)
-p --wc_password Password for WebContainer's Admin (none)
-i --instance WebContainer's Instance into which the war file is to be deploye
d (*)
-d --dn LDAP DN of the target node (*)
-g --global Global display profile (false)
-r --rolesfile File containing the DSAME and portlet role mapping (*)
-f --userinfofile File containing the user info mapping (*)
-v --verbose Generate debug messages (false)
-V --version Generate version information (false)
-l --locale Locale information (en_US)
OPERAND
Specifies a path to the war location.
Deploying to IWS
Is this mean that successfully deploy the portlet ?
After I deploy the portlet, I login to Access Manager, select the "service" from view, click the portal desktop,
click "Manage Channels and Containers", click the "New Portlet Channel...", then click the portlet drop down list,
the portlet name is not displayed in the portlet list.
How can I make the portlet name displayed in the portlet drop down list ?
Can someone help me ?
Thanks!

Hi
According to your description, since this is SQL Server forum, as Olaf Helper’s post, could you get the correct result if you execute the following query in SQL Server Manager Studio (SSMS)?
select UserName from aspnet_Users where UserId in(select FreindId from myFreinds where UserId in(select UserId from aspnet_Users where UserName = '<your typed name>'))
If you cannot get the correct result in SSMS, I recommend to check the Transact-SQL statement. Apart from the error message, we also need to know the table structure, data, join relationships between tables for further analysis.
However if there is no problem in SQL Server query, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, there is detail about listbox control in asp.net. You can review the following links:
How to Bind/Load/Fill ListBox with Sql Server Database in asp.net：http://www.webcodeexpert.com/2013/07/how-to-bindloadfill-listbox-with-sql.html#.U5f75_6KCM9
How to get multiple selected value in ListBox control - ASP.NET using C#:
http://www.dotnetfox.com/articles/how-to-get-multiple-selected-value-in-listbox-control-Asp-Net-using-C-Sharp-1047.aspx
Thanks
Lydia Zhang

PDF export to Excel the decimal point is not displayed in the amount

When I export a pricelist from pdf to excel then the decimal point is not displayed in the amount. It does'n matter in which language I try
Anyone kow why?
So the tool doesn't work for me.

I have no problem. What is your country setting for the decimal separator?
Attachments:
read from csv.png ‏18 KB

After the publication on the hosting page does not open, and the empty html. What's the problem?

After the publication on the hosting page does not open, and the empty html. What's the problem?

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

I'm getting an error message: The app "Pages" was not installed on the iPhone "Mom's iPhone" because you are not authorized for it on this computer

Everytime I sync my iPhone it gives me the warning: The app "Pages" was not installed on the iPhone "Mom's iPhone" because you are not authorized for it on this computer.
Pages was installed when I initially purchased it for my iPhone, but when I got the 4S recently I got the above message. I tried deauthorizing and then reauthorizing, but it didn't help. The Install/Will Install option is there, but gets me the same message. (And I did hit the Apply button)

Agh! I figured out I had two apple id's and was able to install Pages from that account. Dumb! :/

On the etap hotel site, the map page will not display

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/780195]</blockquote><br>
On the etap hotel site www.etaphotel , when i click on map, nothing is displayed. The page just has a space on it.

Hi Fisher,
Unfortunately, In a smartform, only single main window is continued to all pages even though you can declare windows under each page as main window, but it actually acts as the same window for all pages. It just means that if text from 1st page is overflowed, it will continue to the next page with main window.
Command line to go to next page will create an extra page but since text is not flowed in main window, it won't print the text element you have included in main window on third page.
The solution to your problem as I see is that either you include your terms and conditions in the main window of your first page and just before your text element for T&Cs, use Command to go to third page.
Hope it helps.
Ravi

When i open the add ons page in firefox the pages do not display correctly the pages only show text and are in lists

when i click on the add ons tab the page does not show correctly. There are no graphics just text. It is difficult to view the page details. If you click on a link within the page the next page opens with exactly the same problem. All other tabs and pages open and display correctly

Hi,
If you're using a theme you can try to temporarily switch to the '''Default''' theme in Tools > Add-ons > Appearance. If the problem persists, please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u '''Use hardware acceleration when available''']. All these settings/options/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme, option or hardware acceleration is causing issues. Disabling/enabling hardware acceleration, and some types of add-ons in normal mode may require a Firefox restart.
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.org/en-US/kb/Options%20window Options]

Problem with subtotal, and the total icon is not displayed at the toolbar

Hi all,
I'm currentlyhaving difficulties working with the subtotal and the grandtotal. I have the code in the right place like the sort table
CLEAR k_sort.
ADD 1 TO k_sort-spos.
k_sort-fieldname = pv_fieldname.
k_sort-up        = c_x.
k_sort-subtot    = pv_subtot.
APPEND k_sort TO i_sort.
and the fieldcatalog
CLEAR k_fieldcat.
add 1 to k_fieldcat-col_pos.
k_fieldcat-fieldname = pv_fieldname.
k_fieldcat-tabname    = c_tabname.
k_fieldcat-seltext_l = pv_seltext.
k_fieldcat-outputlen = pv_outputlen.
k_fieldcat-datatype   = pv_datatype.
k_fieldcat-do_sum     = pv_dosum.
APPEND k_fieldcat TO i_fieldcat.
but it didn't seems to show both the total and subtotal. Even the icon is not displayed at the ALV toolbar. The field which I need the total is a currency field. I even try other fields (interger fields) but with no luck. I'm using REUSE_ALV. Any help is greatly appreciated.

hi,
In field catalog for the particular column which you want to sum make that as 'X'.
say
WHEN'MATNR'.
it_fcat-do_sum = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program     = report_id
            i_grid_title           = ws_title
*            i_callback_top_of_page = 'TOP-OF-PAGE'
            is_layout              = wa_layout
            it_fieldcat            = i_fieldcat[]
            it_sort                = i_sortcat
            i_save                 = 'A'
            it_events              = i_events
       TABLES
            t_outtab               = i_reportdata1
       EXCEPTIONS
            program_error          = 1
            OTHERS                 = 2.
IF sy-subrc <> 0.
This will enable.

The admin page can not displayed completely

Dear all,
i have install OracleXEUniv,
the www login page displayed OK, i can login
after that i run . for update in rel 3.0 .. ..
@apexins myadminpassword SYSAUX SYSAUX TEMP /i/
.. the sql ran finish ok
but when i try access the address
the login page displayed not OK, image can not displayed, when i enter username and password, and click login, there is massage 'Error in page'
how to repair that ? is wrong in my step ?
i used :
IE Ver 7
Os XP
thanks for anwer

Hi,
Make sure you followed the post-installation tasks mentioned in the Installation Guide.
On a Windows system, you can copy the apex\images directory using Windows Explorer or execute a command such as the following from a command prompt:
xcopy /E /I htmldb\images ORACLE_BASE\ORACLE_HOME\Apache\Apache\images
On UNIX or Linux based systems, you can copy the apex/images directory by executing a command such as the following:
cp -rf htmldb/images ORACLE_BASE/ORACLE_HOME/Apache/Apache
Make sure that you have /i/ defined in one file (httpd.conf, marvel.conf OR dads.conf)
-Priyanka

Creating an album page does not display all the albums?

I am trying to create a page that has an index with "poster frames" as reference of all the pages that I have with movies. I dragged and dropped all at once 10 video clips onto the album button but on the album page only 7 clips are visible. In my sidebar the 10 videos are listed as being there and when I select them they show up. Why don't they all show up visible on the album page? Has anyone else experienced this problem or is it just me?

What's the URL so we can examine the page?
OT

Captivate 7- The Closed Captioning does not display on the screen

I am using Captivate 7 and I am concerned about the issue that the Closed Captioning, which is placed on the flash page and is supposed to display the introduction of our product with the caption, does not show up on the screen. It is confusing that the text of Closed Captioning shows normally on some of the computers in our company but fails to display on the others, no matter on IE 8 or 10. Due to the company policy and the product nature I won’t be able to make a snapshot. We have spent some time on this problem but failed to fix it. I am desperately looking forward to some solutions here. Thanks for any suggestion.
     The environment:
     Windows 7 Sp1
     Captivate 7
     IE 8 and IE 10
Regards,
Bill

Try clearing out your project cache (Preferences > General > Clear Cache) then republish using the option to Force Republish All Slides.
If that doesn't resolve the issue, you may be seeing the early stages of project file corruption. Check the suggestions in this post about troubleshooting issues where you may need to copy all slides to a new blank project shell to try and strip out corruption:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques

I recently updated my iTunes to the new version. For some reason the titles and details of songs on the SONGS page do not appear, although the songs will play. Has anyone else had this problem? Every other page seems to be ok.

I recently updated my iTunes to the new version. When I opened it I found that there were no details listed on the SONGS page. On all other pages the relevant pictures/details appear. Although there are no details showing on the songs page, the songs are obviously there as when you click on a line it plays the song that should be listed. Has anyone else had this problem? (I am using a Windows XP Pro system on my Laptop).

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

I have igoogle for a home page but the personalized page does not load, only the generic page loads; why?

I have built a personal iGoogle home page. I have checked 'stay logged in'. when I open the home page in Firefox it goes to the frontdoor instead of the page I built.

I have built a personal iGoogle home page. I have checked 'stay logged in'. when I open the home page in Firefox it goes to the frontdoor instead of the page I built.

The next page in not displaying in the SAP Script

Similar Messages

Maybe you are looking for