The number of display columns in the report reached the limit" Interactive Report

I get the error message of "The number of display columns in the report reached the limit" when trying to display less than 100 (100 is limit) columns when an aggregate has been created.   This does not happen when an aggregate has not been added to the IR report.  It seems to happen because I have a control break on as well.  When I turn off the control break it works but is not the result that we want.  Interesting enough, if I filter the results down to 500 rows it works just fine.  Does oracle treat aggregates as columns!?  This is a really odd issue that I really need to clear up.
Oracle 11g
apex 4.1.0.33
Thanks in advance,
Shawn.

Hi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
  select
    id,
    name,
    blobcont
  from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
  select
    id,
    name,
    dbms_lob.getlength(blobcont) blobcont
  from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz

Similar Messages

  • The number of display columns in the report reached the limit. Help!!!

    Hello Everyone,
    This might be dumb question. But why do get this error with a IR report? and what is the solution for this. Please help me with this.
    Error
    The number of display columns in the report reached the limit. Please click Select Columns under Actions menu to minimize the report display column list.
    Oh.. And also i have a blob column.. if the format is not given, then the table is fine.. but happen to get this error only when the blob download format is given.
    Thanks and regards
    John
    Edited by: JB on Mar 30, 2012 11:08 AM

    Hi,
    i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
    I have a table
    test_blob (id number, name varchar2(10), blobcont blob)
    If I create IR like
      select
        id,
        name,
        blobcont
      from test_bloband then I define download format I hit the error.
    If you want this to work you have to change your query to
      select
        id,
        name,
        dbms_lob.getlength(blobcont) blobcont
      from test_blobAnd then again define download format for blob on blobcont column.
    Regards,
    Aljaz

  • To restrict the number of data columns displayed in BW Web report

    Hi,
    In the corresponding Bex query i am using 'Start Time' characteristic in the row. In the BW Web template i don't want the 'Start Time' to be displayed when i execute.
    I tried to restrict the number of data columns displayed in the web item table properties but that did not help
    Can i get some help
    Thanks,
    Mala

    Hi Mala,
    You can try out the following: Create a view on your query and in that view remove the Start Time char from the drilldown. Use this view as a data provider in the web template.
    Hope this helps...

  • How do I change the number of picture columns in a folder

    how do I change the number of picture columns in a folder

    Never mind.  I found the answer.  For those who may wonder: you slide the cursor on the bottom right.  I looked in IPhoto help but there was nothing there.

  • How to display the value of a column in a chart at the top of each column

    How to display the value of each column in a chart at the top of each column?

    Like this?
    Done using chart Inspector.
    For details, see Chapter 7,  Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
    Regards,
    Barry

  • I cannot sort my songs using the "plays" column (also known as the number of plays column). The number of "plays" is not increasing as a song finishes.

    The "plays" column (also known as the number of plays column) is not saving not saving the number of plays (v 11.0).

    My number of 'Plays' was not increasing anymore at some point after updating to Version 11.  I had iTunes rev 11.0.1.12.  Today I updated to the latest rev 11.0.2.26, and now the numer of plays is increasing, so they must have fixed the bug!

  • How do i Increase the number albums displayed in iTunes 11 currently only showing 5

    How do i Increase the number albums displayed in iTunes 11 currently only showing 5 in iTunes 10 it showed ten. With only five albums showing in a line at one time it takes a long time to look at my collection. In the previous version you could alter the size of the picture of the album. Has cover flow gone?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • The cumulative balance displayed in FS10N does not match the sum of the det

    Hello,
    The cumulative balance displayed in FS10N does not match the sum of the details.  For example, we have a GL disbursement account that has a ***. Balance of 8 million.  The debit is 2 million and the credit is 10 million. But, when you drill down on the ***. Bal. for the current period, the sum of the details is 9 million.  According to our users, the 2 balances should equal.  I did a search in this forum and found 1 post stating they had the same issue and the answer was to run f.16. Has anyone experienced this and if so, how did you handle it?  I'm not sure how f.16 functions.  Do we have to run it for each consecutive year?  I'm not a FI specialist.  I'm responsible for data archiving and the users think it's related to archiving.  However, we have a test system that was resynced with production prior to when archiving was done and it shows that this issue is pre-existing.
    Thank you very much in advance,
    Lourdes

    Hello,
    There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
    You need to identify which accounts are being changed with line item display at a later stage.
    In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
    1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
    2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
    3. Block the account for posting in COA Segment and Company Code Segment in FS00
    4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
    5. Now, remove the block you kept on the GL Account in FS00.
    This will reset the line item display retrospectively.
    Hope this will solve your problem.
    Regards,
    Ravi

  • How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

    How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

    Dear Friends,
    I am absolutely agree with your answer .
    But my question is,
    Lets say.....
    One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
    So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
    Hope you all understood my requirement .
    Thanks & Regards,
    Aditya

  • I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

    I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
    ===Answer===
    Comment on usual method and solution, by a forum Moderator.
    As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
    # Open a new tab and type "about:config" in the address bar.
    # In the Search bar type: "newtab"
    # Locate and double click "browser.newtab.url"
    # In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
    # Verify that the value has changed and now all new tabs will be blank.
    See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

    Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

  • When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

    When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
    Problem Event Name:             APPCRASH
    Application Name:                  iTunes.exe
    Application Version:               10.4.0.80
    Application Timestamp:          4e262cfr
    Fault Module Name:               QuickTime.qts
    Fault Module Version:             7.70.80.34
    Exception Code:                     c0000005
    Exception Offset:                    00146b30
    OS Version                                                            1033
    Locale ID:
    Additional Information 1:          0a9e
    Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
    Additional Information 3:          0a9e
    Additional Information4:          0a9e372d3b4ad19135b953a78882e789
    Any assistance I can get will be greatly appreciated.

    Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

  • Has Mozilla changed the way Firefox displays @font-face enbeded fonts? The site I'm codeing works in Safari, Chrome, and IE, but Firefox 8.0.1 doesn't display the embeded font.

    Has Mozilla changed the way Firefox displays @font-face enbeded fonts? The site I'm codeing works in Safari, Chrome, and IE, but Firefox 8.0.1 doesn't display the embeded font.

    No problems here with the H1 headers.
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • I have changed by service provider and have a new number which i use on Iphone 5. The number shown on Facetime and Imessage is  still the old one. How do i update it

    I have changed by service provider and have a new number which i use on Iphone 5. The number shown on Facetime and Imessage is  still the old one. How do i update it

    Deregister your old phone from here if you regsitered it
    https://supportprofile.apple.com

  • Aperture import plug-in won't run.  After examining my library the number of image files stays at "undetermined" and the import button stays greyed out.  Any thoughts?

    Aperture import plug-in won't run.  After examining my library the number of image files stays at "undetermined" and the import button stays greyed out.  Any thoughts?

    Others have the same issue, with the import button being grayed out.  My trail copy expired, but I believe by poking around in the options and selecting another Aperture library and re-selecting, I was able to continue.
    The problem is common enough, that hopefully Adobe will address.  In the mean time, try repairing your Aperture library, checking permissions, exporting a subset of your library for a test, or try putting that library subset on an external drive.  (Can usually avoid permissions issues.)

  • HT1578 I have found that I can't access the contents of the encrypted disk in time machine backups.  The Finder window displays a grayed-out icon representing the disk.  Can this be remedied?

    I have found that I can't access the contents of the encrypted disk in time machine backups.  The Finder window displays a grayed-out icon representing the disk.  Can this be remedied?

    Time Machine error: Apple Support Communities
    OSStatus 5 when trying to use Lion...: Apple Support Communities

Maybe you are looking for