The off button does not switch to 'hibernate' or lock when playing music.
The off button does not switch to 'hibernate' or lock when playing music. I have to hold the off button down
for a prolonged period of time to get it to switch off; have had to resort to holding the off button and the main
button simultaneously to reset but no improvement.
- First try restoring the iPod from backup via iTunes.
- If problem persists, restore to factory defaults/new iPod.
- If still a problem than you likely have a hardware problem and an appointment a the Genius Bar of an Apple store is in order.
Similar Messages
-
During audio messaging the send button does not switch to a microphone after selecting a contact
During audio messaging the send button does not switch to a microphone after selecting a contact
Actually, this problem is the same as the one described in your other thread, and should be fixed as well after following the procedure described there.
-
my on/off button does not appear to be working on my iphone 3.....is there any way around this....anyway around this?...the phone also periodically just switches off.
Likely a hardware issue... no way around that except to get it repaired or don't use it (the button).
Try restoring to solve the switching off problem. -
how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl
Place the iPod in recovery mode using this program. and then restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold home button to reset please help.
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
What do i do if my ipod 3 is disabled and the power off button does not work?
What do I do if my iPod 3 is disabled and the power off button does not work?
Did you try restoring your iPod on itunes.
-
pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.
Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc. -
My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
I need to hard reset a Palm TX but the Power button does not function.
I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
Post relates to: Palm TXHi,
PowerBtn from the Canuck Software HomePage.
NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
http://www.canuck-software.ca/
PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
This setting will remain active while 'Enable' on the PowerBtn screen is active.
The user can select 'Disable' on the PowerBtn screen.
The setting will survive a Soft Reset. (Hi PG )
If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
All the best, woz of oz
Post relates to: Palm TX -
HT2895 the genius button does not let me turn it on
the genius button does not let me turn it on
SAME PROBLEM. IM SACRED THAT THE ONLY THING I WILL HAVE TO IS REST MY HOLE PHONE! honestly pple is being pain in the *** lately. im gonna switch to android
-
My iPhone 4 is vibrating constantly and will not turn on or turn off when any buttons are pushed. How can I reboot it (holding top on/off button does not reboot or have any impact)?
Hi Ive just had the same problem,I was playing a gamy 'my farm' & i put my iphone 4 down to answer door then when i picked it up the iphone was black screen & no power,i did plugin to itunes & the wall plug but nothing,then i held the power & home buttons down for about 6 seconds & the apple logo appeared.I really freaked,its ok right now but im phoning my apple store becoz it had 77% battery so theres something wrong with this iphone 4.
I changed my 3gs 4 times & my original 2g 5 times,I just dont have any luck with iphones,now im worried its gonna do that again ,the game 'my farm keeps dropping out & saying no internet yet my internet connection is strong & fine,looks like we have the same problem even wen i plugged it into itunes it didnt recognise the iphone,i hope u get yours sorted -
is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x. -
my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything
Get it fixed then, make an appointment with the Apple genius bar.
-
I just update to ios6 and mi wifi blow up, the activation button does not slide to on position, is blocked
No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host> -
HT4053 How do I delete photos, the delete button does not appear to be working?
I have downloaded all my photos to my new IPad. I need to delete some I do not want, how do I do it. The delete button does not appear to be working?
I personally don't know of any other software that does syncing, however, you can use another cloud service like Dropbox or Flikr to house your photos, add and delete them and have them available for viewing on any device or comuter that has an internet connection.
I'm not sure why you would be having trouble not getting photos that you put into your Photo Stream Uploads folder on your iPad. Photo Stream is Photo Stream. Also, just so you know, photo management and Photo Stream have nothing to do with iTunes. Photo management on the computer is done through your photos folder and app (on a Mac, it's iPhoto). You only use iTunes to tell the sync process which items to retrieve and sync from that library. Photo Stream is completely independent of iTunes altogether.
If you want to get photos from a camera to your iPad without having to use a computer, get a camera connection kit which will allow you to physically hook the camera to the iPad, and to directly download the photos from the camera to the iPad.
You would still want to also hook the camera up to the computer to back those photos up to your photo library on your computer.
Also you might want to look into purchasing (for under $5) iPhoto for your iPad:
https://itunes.apple.com/us/app/iphoto/id497786065?mt=8
Seems like you might benefit from talking to your local Apple Store about when they might have some sessions for learning photo management and sharing between your device and computer, because what you appear to be wanting to do is all do-able. I guess I'm just missing what your issue is. You can many things with photos on your iPad, however, your device will never be a substitue for your computer for backing up and managing your photos.
So, best of luck, I hope one of the suggestions above will help you to achieve what you are trying to do.
Cheers,
GB
Maybe you are looking for
-
Program running in the background
Hello! I am wondering if it is possible to create a java program that runs in the background on a mobile phone. I.E can it run without beeing interuppted by a call or the locking of the key pad. Is it possible to let the program run without interferi
-
Indesign CS5 won't Save or Save as..
I have recently installed Mac OSX 10.6.3 (snow_leopard) onto my iMac and now for some reason Indesign CS5 will not save or save as. It allows me to selecteither of them in the menu but nothing happens at all. If i try to close the document after mak
-
I've tried opening these .xls files with Pages, Keynote, and Textedit with no luck. Does anyone know what program besides MS Office I can use to open these files?
-
"You cant run adobe flash cs4 because it is not supported on this architecture" HELP!
I just installed adobe cs4 design premium, and everything works fine except for the program I wanted most, which is Flash. It has a little circle with a line through the icon and whenever I try to run it, it tells me that it cant run because it is no
-
why has elements 10 editor gone away; when i click on a photo in organizer to go to editor i get that editor still busy sign!!