The one website will not load because it is only compatible with ver 6 and 7. How do I downgrade to ver 6 or 7?

The website is for invoicing and the very large company that has their invoicing on there is not going to upgrade to fix the problem, they say just download a previous version in order to access the site. However, I cannot find on here where to download a previous version of firefox.

The only previous version that is still supported with security updates is Firefox 3.6.x.
All other versions from Firefox 4 till the current Firefox 9.0.1 version are security and stability updates and add new features. It is not recommended to downgrade to such a version.
You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
See also:
*https://support.mozilla.org/kb/Installing+a+previous+version+of+Firefox

Similar Messages

  • One website will not load on any browser, will work on mobile phone

    One website will not load on any browser (Firefox, IE, Chrome). Have turned off all security programs and firewalls, have tried in Safe Mode, will not load. It works on my smartphone. Can load the basic site, but not the sign-in page. Says Connected at the bottom of the page, but says Connecting at the top, and the little circle goes around counter clockwise; ran for one hour, still didn't load. It used to load, don't know if I did something or downloaded some program to make it stop.

    You can try to access the website in a New Private Window.

  • One website will not load suddenly

    All of a sudden one website that i frequently visit will not load on my Apple Extreme network with any of my computers and devices. I can load the website if i'm at work or off the home network. Why is this happening? If i connect to the cable providers modem, i can access the site. As soon as i plug back into the Airport Extreme, i cannot. Any help would be greatly appreciated. Thanks in advance.

    These are really hard to figure out.
    What firmware is on the AE? Did it recently upgrade?
    I suggest you downgrade firmware.. 7.6.1 is usually more reliable.
    If it is an old AE then even 7.5.2 might be worth a try.
    Also just do a factory reset on the AE and see if you get any improvement after redoing the setup.

  • One website will not load.

    Very frustrated!  Key.com will not load in safari or firefox.  I've reset safari, re-booted mac and modem.  It's just hat one website.  Did I do something to block it out???
    Thanks,
    Kim

    I have run into this issue as well. But, with different sites. Specific sites will not load.
    The sites I run into issue with are Apple.com and Google.com and recently Bing.com.
    Here is what I have run into on my macbook air since the latest update. I leave my air on 24/7 just close it open it up and go. When you close your air or it goes to sleep it shuts off wifi and has to reconnect upon waking. The issue happens when I reconnect to the wifi.
    Upon reconnection apple.com and google.com will not load, other sites load without issue. And randomly google switched with bing.com one time where google would load but bing would not. I had to use bing because google would not load.
    When I reboot the websites load without issues until the system sleeps and wakes again same problem.
    I tested in Safari, Firefox, and Chrome same problem, I cleared cookies same problem, I reinstalled browsers same problem.
    I tested the sites on my windows system sites work without issue through the same router. Tested my windows system wireless and wired sites work. Tested on my android phone sites work over wifi. Used Chrome, FF on windows and opera on Android sites work on all of these. While simulataneously the sites do not load at all on the air.
    To make matters more confusing I go to work or a friends test the air on their wifi and the sites work.
    For some reason with my router, wifi, google.com, apple.com, on wake only, and my air OSX latest version with latest update these sites do not load no matter the browser.
    I checked for malware and viruses as this would have been a likely culprit found nothing.
    Anyone have any ideas, any diagnostic tools you think I should try run.
    I checked my router I have nothing is set up that I can see that would be blocking just these sites and just on my air. I am still researching diagnosing but, this one is odd and seems somewhat similar to this issue.

  • Only one website will not load.

    There is one specific website that will not load for me. It will not load on IE, Chrome or Firefox. But it works on any browser on my phone or on my families laptops.
    The website loads a blank white screen and when I view the source code there is nothing except the line number 1 and a blank line.
    To access this page I click on a link, I have tried opening in the same tab, new tab, new window, new private window but to no avail. I have given the website every possible permission I can, allowed everything to run on the page. There are no add ons, no cookies, no temporary history and hardware acceleration has been disabled. But nothing solves the issue that I have. After reading questions looking for help none of the generic answers provides any help then what I have already done.

    If it won't open on your PC then it's not a Firefox issue and we really can't help you with your issue.

  • HT1338 I purchased keynote, numbers, and pages when i bought my macbook air. However, the December update will not update because it says I do not own the software, but I do. What can I do to get the software to load? This is my first Mac so I am still le

    I purchased keynote, numbers, and pages when i bought my macbook air in late september. the december update will not load because it says i do not own the software and returns an error messgae 100. i have read manuals and looked over the web but i cannot figure out how to get this software update to identify that i do own these three pieces of software. they are installed and usable. any ideas would be appreciated before i call apple support.
    This is my first mac so i am still learning...
    thanks

    First, make sure you are logged into the App Store with the same AppleID that you used to purchase the apps.
    If that is not it, look in the App Store under Purchases. Are they there?
    If not, go into your account in App Store and click the link to show hidden purchases.
    If they are still not there, use the support link in the App Store.
    If they do show up, copy all the apps to an external drive, then remove them from your Mac. Go to the App Store, Purchases, and install from there.

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

    I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Some websites will not load in FF. Same websites will load in IE.

    Certain websites will not load in FF, but will load in IE. FF starts to try to load the page, but then stops and "Done" appears in the lower left corner of the screen, which displays as a white, blank page.
    == URL of affected sites ==
    http://https://www.fastmail.fm/mail/?UDm=49;Uid=304c977f6fe1b6a8a101!1279238629

    Hello and Welcome to Apple Discussions. 
    Perhaps if you post the URLs we could take a look and then make informed suggestions.
    <hr width="200">
    BTW this forum is for the much older iMac (Flat Panel) models
    G4 (aka Flat Panel): Intel:
    Click image to go to correct forum.
    cheers
    mrtotes

  • The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

    The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

    GPPNeil
    Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
    First..
    1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
    2. Do the problems exist if you disable the antivirus and firewall(s)?
    3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
    4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
    5. Have you updated the Adobe Application Manager?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
    7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
    13.0 Folder in which it exists.
    But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
    CCleaner - PC Optimization and Cleaning - Free Download
    If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • The app store will not load after downloading Mountain Lion.

    The app store will not load after downloading Mountain Lion. Anyone else having this problem. It works on the the admins acount on the computer but none others. All of the parnetal controls are off and it doesnt work. All i get from the app store is this.

    Yes. I have done everything. restarted, made sure there are no funny blocks or no permissions

  • When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

    When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

    When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

  • The iTunes store will not load. what can I do?

    The iTunes store will not load. What can I do?

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I just ran the 9.1 update for CF and now the adminastrator page will not load

    I just ran the 9.1 update for CF and now the administrator page will not load, the site runs but that is it I know I'm missing something. I have rebooted the server. No change and all the services are running. I am on the server not trying remotely .
    Message was edited by: Norman Rothwell

    Hi Norman,
    Can you please confirm if you ran the Update 9.1 or any patch.
    Regards,
    Priyank

  • The Adobe website will not let me move to the checkout and pay after selecting lightroom 5 upgrade.

    The Adobe website will not let me move to the checkout and pay after selecting lightroom 5 upgrade

    use a different browser or, delete your adobe.com cookies and retry.

Maybe you are looking for

  • Linking a PDF document to URL in Smart forms

    Hi All, Please anyone let me know how i can link a PDF document to a link in the smart form output. I'm outputting Purchase order details on a smartform and I'm supposed to give an URL link for the user to click on it for Terms and Conditions. Please

  • Touchsmart 9100 Audio Cuts Out

    I have Touchsmart 9100 with Realtek High Definition Audio running Win 7 Home Premium SP1, 8GB RAM (currently: 7.75GB Physical, 1.88GB Available, Total Virtual 13.7GB, Available Virtual 7.53); Dell 5650 5.1 surround sound with the three-to-one reducer

  • Org.apache.jasper.JasperException: Unable to compile class for JSP

    Hi All, I have been using NetBeans IDE 3.5.1. AndI am trying to execute one JSP file, but it is giving error and i am not able to execute the servlet files also in NetBeans IDE. Can anybody help me out regarding this... type - Exception report messag

  • "DefaultPhotosDescription" in an album disappearing?

    Tried to use the "picture book" Theme. In some cases (2 photo layout) I go a placeholder for text: "DefaultPhotosDescription" in which I can write what i want. Sadely for each new page I added there was no placeholder for text, and was not possible t

  • Need install files for Photoshop Elements/Premier 10.

    I lost my install disks and my computer died.  How do I get the files for photoshop elements/premier?