The operation could not be completed because an error occurred when creating frame 30256 (error -1).

When trying to export a project from FCPX, I get this error
The operation could not be completed because an error occurred when creating frame 30256 (error -1).
Has anyone any ideas?
Many Thanks

Switch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.

Similar Messages

  • Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

    Hi Friends...
    I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

    Sorry, I am very confused. I asked the following question....
    Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
    The answer that you gave was....
    This is the only one
    Now you are saying that....
    But I have lots of other files on Time Capsule! The back up file is only one of them.
    Can you clarify, please?

  • The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    https://discussions.apple.com/thread/6219522

  • The operation could not be completed because an item with the name xyz already exists

    I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
    however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
    I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
    anyone know the cause, or at least a fix?

    If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
    Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
    For some other possible solutions, see:
    operation can't be completed because an...: Apple Support Communities

  • The operation could not be completed because there is not enough space on the destination disk

    I have 124Gig of space left on my HD, when I try to export my movie i get this error "The operation could not be completed because there is not enough space on the destination disk"  I have read some of the threads went in and deleted the iMovie Preference file but no luck.. any Ideas?  Thanks!

    You need the System DVDs that originally came w/the computer in order to troubleshoot.  All Macs prior to & including ML came w/System DVDs. 
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available. 
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html  Another resource:  International Support Phone #s.

  • The operation could not be completed because an error occurred when creating frame 6105 (error -1).

    I am trying to share a project and after the 3% of sharing the project it appears this message.
    The operation could not be completed because an error occurred when creating frame 6105 (error -1).
    What can I do?? I need some help please!!

    You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.

  • The operation could not be completed because an error occurred when creating frame 19788 (error -1).

    When attempting to build a quicktime movie from my video project on final cut pro I got this message    "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

    Kathy ...
    Better to post your topic in the Final Cut Pro community here.

  • The operation could not be completed because an error occurred when creating frame 570 (error -1)

    Hi everybody,just started with FCPX and the following occured:
    The operation could not be completed because an error occurred when creating frame 570 (error -1)
    Result is that i can not share to my hard disk.
    If anybody could help me out here....?

    CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.

  • The operation could not be completed because an error occurred when creating frame 2829 (error -1)

    I'm getting this error code in Final Cut Pro.  The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it?  This code comes up when exporting. 

    Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1.  I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

  • Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

    I did try in all of them and it doesnt work it apears like that........
    The share operation Master File has failed
    The operation could not be completed because an error occurred when creating frame 608 (error -1).
    and i dont know what to do plese hlp me....
    Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help 

    Double post…

  • I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

    I am using a portable USB storage drive connected to my laptop.  I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it?  Thank you.

    All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
    Open the Terminal application in the Utilities folder. At the prompt enter:
    sudo rm -rf
    Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

  • Why do I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1).

    In motion 5, when I go to export - H.264 - I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1). Why and How do I Fix It???

    What version of FCPX ?

  • What does "The operation could not be completed because an error occurred when creating frame 0 (error -1)." mean, and why does it keep happening?

    So I've been trying to export a video file from Motion 5 (and FCPX), and I keep recieving the message "The operation could not be completed because an error occurred when creating frame 0 (error -1)". I've found the problem has something to do with a video file in the project, Ive tried multiple versions of said file, in multiple formats (.mov, h264, etc.), and I keep getting the same result.  The file was originaly a 640x480 wmv file. Any suggestions?

    I ended up figuring out a solution, but I'll get to that in a sec.
    To answer your question, I converted the .wmv file in a program called Media Converter (available in the App store), and converted it to an h.264 file (then later to a .mov file, and then to an .mpg). I could view the file, and work with it in projects, but any project I tried to output with any version of said file, would result in the afor mentioned message, with the same results in FCPX (and Compressor 4 as well).  I tried multiple frame rates, resolutions, files types, re-converting the file, all with no luck.  My impression from said experiments, and reading other discussions was that it was a corrupt file. 
    Then I got frisky...and a little desperate. I brought the converted file (the .wmv to .mov) into Motion 4... and an export worked first try.  So I exported a pro-res file from Motion 4, and used that file in the already built Motion 5 project, and voila! 
    So, who knows what that means in real terms, as for the whats and whys.

  • Operation could not be completed because an error occured when creating frame 56 (error-1)

    Hi
    I'm trying to export a movie in motion but I keep getting the error "Export Failed. The operation could not be completed because an error occured when creating frame xx (error-1)".  I've tried some of the other suggestions such as preventing app nap, changing the codec used and I've uninstalled, rebooted, and reinstalled motion.  Nothing has worked so far, and it's driving me crazy!
    Can anyone suggest something?  I'd be most grateful.
    Thanks

    Hi GFXZen, thanks for your reply.
    I actually solved by re-exporting the source video, but I'll get to that (to skip, see TL;DR).  In case it helps anybody else I'll answer your questions first.
    The only element present at the majority of the failure points was another video, so there weren't any others to turn off.  Though when I turned off the video and exported, it actually worked (this is what led me to evaluate the source video rather than the motion project).
    Adjusting the export settings did not help me much, I tried h.264, same as source (which  was a .mov), and ProRes 4444: failed.  Tried as a draft: failed.  I didn't want to mess with any of the other render settings because to be honest, I'm not a video editor, so my experience with all of this is severely limited.
    I forgot to mention in the first post that I'd already tried the export on a different machine (one far newer and more powerful): failed.  Dispite googling image sequences, I wasn't really sure how this related to the video, or how to set things up so the audio was preserved, so I skipped that.
    TL;DR
    According to what I googled, it sounded like the video needed to be reindexed/exported/whatever, so I downloaded a program MPEG Streamclip (http://www.squared5.com/svideo/mpeg-streamclip-mac.html) 1.93b8 (as  the stable doesn't support Lion upward).  It's completely free, and when I ran it, worked first time.  I simply opened the video and exported to quicktime, and changed the compression to Apple TIFF.  That was it. 
    There was one unusual thing though, the file I started with was just over 1GB, but the end result was just over 4GB - but visually I couldn't see any loss in quality at all, and it worked in the motion project - which is really all that matters.
    Hope this helps somebody.

  • The operation could not be completed because the item "name" is in use?

    Hello,
    When i try to move a file (smaller than 4Gb) on my ext. HD which is MS-DOS formatted i get this message:
    http://i36.tinypic.com/20qmffd.png
    Does anybody know what i can do?
    Best Regards,
    Message was edited by: Snorrib

    I have the same problem (no ability to move or delete a file that the OS thinks is in use, when in fact it is not). I can offer a few clues that may help others help us. The problem in my case is that my Powerbook had trouble copying a large image file. Instead of copying a 5.8MB file, it stopped part way in the process, said the file could not be read or copied and left a 4kb fragment of a file which now cannot be deleted (I get exactly the same message as you). So I think our problem is not knowing how to delete a corrupted file. Anyone know the answer to this?

Maybe you are looking for

  • Free Transform Rotation Issue - Layer rotates/moves by itself after clicking on it?

    Hey all.  Since the last update, I have been experiencing this weird issue while using Free Transform.  Sometimes, after I invoke Free Transform and then click on the layer I am transforming, it seems to rotate by itself.  Usually clockwise.  It happ

  • Ipod Sync problems

    I have a 80 gb pod when I plug it into the usb cord Itunes does not see that it is hooked up. And during this the ipod does not have the do not disconnect messege displyied but when i press menu for a few seconds it displays that messege and then goe

  • Why am I unable to save unsecured PDFs

    I have Acrobat 9 on a new Vista PC. All of a sudden I am having difficulty saving downloaded PDF documents, even tho they are not secured (i.e. Properties/Security shows everything Allowed including copying). Am even in email correspondence with one

  • Query for copying standard program in ECC 6.0

    Hi,   My problem is when i copy a standard program to my Z program in ECC and then try making some changes there it says new enhancement point will be created (specific to top include in function module).Kindly suggest what action needs to be taken f

  • Time machine verify backups sticks at 69%

    Mac os mountain lion 0s 10.8.2 No longer a disk image on the desktop but backup seems to be working.  Verification sticks on 69% Any help appreciated