The operation could not be completed. The specified module

Microsoft Visual Studio
The operation could not be completed. The specified module could not be found.
OK
i get teh above erro r msg when i am trying to open the crystal report rpt file in design mode
i tried taking a new crysttal report but that too gives me same error msg

Does it say what dll/module it can't find? Check the Application log for more info.
What happens if you create a new report? What happens if you open an old report?
Have you install any VS 2005 CR patches?
Try one of these samples:
Non-Enterprise Samples
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Thank you
Don

Similar Messages

  • Daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.

    Hi, I am running a program where I have 4 nidaq cards on a single machine, all connected. I am trying to start a counter and keep getting that error (daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.) in two places in my code. I understand what the error means (you can only have one task of a type per card), but I don't see where that is occuring in my code.
    See below for code. I noted the two places where the error is occuring. I am debugging someone else's code, which is part of the problem.
    Thanks!
    counterTask = 0;
    daq_err_check( DAQmxCreateTask( "counter_generation_task",
    &(counter_generation_task) ));
    daq_err_check( DAQmxCreateTask("counter_count_task",
    &(counter_count_task) ));
    char co_chan_name[40];
    char ci_chan_name[40];
    char ci_trig_chan_name[40];
    sprintf( co_chan_name, "%s/ctr0", niDev);
    sprintf( ci_chan_name, "%s/ctr1", niDev);
    sprintf( ci_trig_chan_name, "/%s/PFI9", niDev);
    printf("OK1");fflush(stdout);
    daq_err_check( DAQmxCreateCOPulseChanTicks( counter_generation_task,
    co_chan_name, "", "ai/SampleClock",
    DAQmx_Val_Low, 32,16,16) );
    daq_err_check( DAQmxCfgImplicitTiming( counter_generation_task,
    DAQmx_Val_ContSamps, 1000) );
    daq_err_check( DAQmxCreateCICountEdgesChan( counter_count_task,
    ci_chan_name, "",
    DAQmx_Val_Rising, 0, DAQmx_Val_CountUp) );
    daq_err_check( DAQmxCfgSampClkTiming( counter_count_task,
    "Ctr0InternalOutput", 1000.0, DAQmx_Val_Rising,
    DAQmx_Val_ContSamps, 1000) );
    daq_err_check( DAQmxSetRefClkSrc( counter_generation_task, "OnboardClock") );
    daq_err_check( DAQmxSetRefClkSrc( counter_count_task, "OnboardClock") );
    printf("abt to start counter_count\n"); fflush(stdout);
    daq_err_check ( DAQmxStartTask( counter_count_task ) ); // ERROR OCCURS HERE
    printf("abt to start counter_gen\n"); fflush(stdout);
    daq_err_check ( DAQmxStartTask( counter_generation_task ) ); // ERROR OCCURS HERE
    fflush(stdout);
    Thanks again for your patience!

    I get it when capturing from my mini DV cam (which is not controllable by FCP). To resolve, I have to click Capture Now a split second after I start the DV tape rolling.

  • The operation could not be completed. the file is not a movie file (-2048)

    I have updated all my add-ons.

    I get it when capturing from my mini DV cam (which is not controllable by FCP). To resolve, I have to click Capture Now a split second after I start the DV tape rolling.

  • The operation could not be completed The connection failed  Imac

    I am trying to view on line videos for a class and I keep getting an error message -5420  Check internet connection and try again.
    my connection is fine

    So what sort of website is this on?
    Has this occured before?
    Have you tried another browser?

  • PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

    Dear Adobe Community,
    I got my first imac a few days ago, and i decided to install Adobe CC.
    When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
    And I also have a problem with Premiere, when i want to export a project says that premiere must close.
    This is the try version, is this a problem of Adobe or Apple? i'm very worried
    Help!
    Thank you!
    Ivana

    Muchas gracias!!! Ha funcionado!
    El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
    Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
    created by Federico Platon in Foros de usuario a usuario - View the full discussion
    Confirma que se trata de una cuestión de permisos.
    Por cierto te aconsejos actualices la 9.1  a 9.2, posiblemente se habría arreglado así también.
    Bueno los pasos son:
    2. Select Go from the Finder Menu.
    3. Select Computer.
    4. Select Macintosh HD.
    5. Select Users.
    6. Select your user profile.
    7. Right click on user profile. Select Get Info.
    8. Go to bottom and unlock with admin password to make changes.
    9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
    10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
    Creo que no se necesita traducción.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Foros de usuario a usuario at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, " The operation could not be completed.  The system cannot find the path specified" Resetting preferences did not fix.

    The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, “ The operation could not be completed.  The system cannot find the path specified” Resetting preferences did not fix.

    my os is windows 7.  elements 12 worked fine for many months then save for the web stopped working

  • Contacts error: The Operation could not be completed. No other information is available about the problem.

    I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

    Thanks!  I looked at the Busycal post:
              To fix this, open System Preferences > Security & Privacy, select Contacts in the left sidebar, then check BusyCal.app.
    On my system, only Skype, Parallels, and Contacts Cleaner are enabled to access contacts.
    FYI, LinkedIn doesn't list any apps as having asked for, or been given access.
              If that doesn't work, here is a bigger hammer:
    OK
              1) Launch Terminal in /Applications/Utilities.
              2) Paste the following text and hit return:
                   tccutil reset AddressBook     
    First, I want to see what that does so I ran man tccutil
         NAME
              tccutil -- manage the privacy database
         SYNOPSIS
              tccutil command service
         DESCRIPTION
              The tccutil command manages the privacy database, which stores decisions the
              user has made about whether apps may access personal data.
              One command is current supported:
              reset    Reset all decisions for the specified service, causing apps to prompt
                       again the next time they access the service.
         EXAMPLES
              To reset all decisions about whether apps may access the address book:
                    tccutil reset AddressBook
              3) Quit Terminal.
              4) Launch BusyCal, and click OK when asked whether to allow access to your contacts.
    Now I see under System Preferences->Security&Privacy->Privacy->Contacts that all apps were removed from the list.
    I haven't had BusyCal in years so I just launched Calendar and Contacts.
    Unfortunately, as soon as I launch Contacts, I get the pop-up again about the LinkedIn

  • Error while consolidating. The operation could not be completed.

    Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
    Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
    What gives?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

    Hi Friends...
    I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

    Sorry, I am very confused. I asked the following question....
    Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
    The answer that you gave was....
    This is the only one
    Now you are saying that....
    But I have lots of other files on Time Capsule! The back up file is only one of them.
    Can you clarify, please?

  • IMovie error message "The operation could not be completed"

    I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
    Any suggestions?
    Thanks

    My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder.  Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
    I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

  • The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    https://discussions.apple.com/thread/6219522

  • The operation could not be completed because an item with the name xyz already exists

    I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
    however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
    I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
    anyone know the cause, or at least a fix?

    If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
    Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
    For some other possible solutions, see:
    operation can't be completed because an...: Apple Support Communities

  • 'The operation could not be completed. Access is denied' during delete.

    Hello World,
    Something happened while working in my Visual Studio 2010 Professional environment.
    When I delete a member from my Solution Explorer, it disappears from the memberlist, is marked as 'locked, deleted' and can be removed from TFS using Check-In. But during the delete process I get the message 'The operation could not be completed. Access
    is denied.'
    I'm an Administrator on my computer (manually adding/deleting members in my workspace and/or directly in TFS is not a problem). I get this message for every delete I perform, even in other Solutions!
    The member will remain in my workspace however. 
    Can anyone help me with this problem please?
    Thanks,
    Guy Swagen
    Microsoft Visual Studio 2010
    Version 10.0.40219.1 SP1Rel
    Microsoft .NET Framework
    Version 4.0.30319 SP1Rel
    Installed Version: Professional
    Microsoft Office Developer Tools   01018-532-2002181-70270
    Microsoft Office Developer Tools
    Microsoft Visual Basic 2010   01018-532-2002181-70270
    Microsoft Visual Basic 2010
    Microsoft Visual C# 2010   01018-532-2002181-70270
    Microsoft Visual C# 2010
    Microsoft Visual C++ 2010   01018-532-2002181-70270
    Microsoft Visual C++ 2010
    Microsoft Visual F# 2010   01018-532-2002181-70270
    Microsoft Visual F# 2010
    Microsoft Visual Studio 2010 Team Explorer   01018-532-2002181-70270
    Microsoft Visual Studio 2010 Team Explorer
    Microsoft Visual Web Developer 2010   01018-532-2002181-70270
    Microsoft Visual Web Developer 2010
    Crystal Reports Templates for Microsoft Visual Studio 2010   
    Crystal Reports Templates for Microsoft Visual Studio 2010
    Java language support for Visual Studio   1.0
    Java language tools for Visual Studio includes IntelliSense and more... eventually...
    Java project support for Visual Studio   1.0
    Java project system for Visual Studio
    Micro Focus Enterprise Developer Team Edition 2.2   Serial number: xxxxxxxxxxxxxxxx
    Micro Focus Enterprise Developer Team Edition 2.2 Version 2.2.01204.
    Serial number: xxxxxxxxxxxxxxxx Full license
    For more information, visit http://www.microfocus.com.
    Copyright (C) Micro Focus 1984-2014. All rights reserved.
    Micro Focus Rumba Integration   1.0
    Micro Focus Rumba Integration is a Visual Studio package which provides connectivity to Mainframes.
    Microsoft Team Foundation Server 2010 Power Tools   10.0.41206.0
    Power Tools that extend the Team Foundation Server integration with Visual Studio.
    Microsoft Visual Studio 2010 Professional - ENU Service Pack 1 (KB983509)   KB983509
    This service pack is for Microsoft Visual Studio 2010 Professional - ENU.
    If you later install a more recent service pack, this service pack will be uninstalled automatically.
    For more information, visit http://support.microsoft.com/kb/983509.
    Microsoft Visual Studio 2010 SharePoint Developer Tools   10.0.40219
    Microsoft Visual Studio 2010 SharePoint Developer Tools
    Microsoft Visual Studio Process Editor   1.0
    Process Editor for Microsoft Visual Studio Team Foundation Server

    Hi GuySwagten,
    Based on your description, the files you're trying to delete are locked by other team members of your team project in server workspace. You can have a check with your team members or check the hisotries of the files to see the lock information.
    Please refer to this
    page to get more information about TFS lock types. And you can ask the team member to unlock the files if you want to delete them or do other operations.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The Operation could not be completed. No other information is available about the problem.

    MAC OSX 10.8.5
    Processor 2.7 GHz
    Memory 4GB1333 MHz DDR3
    Logic Pro 9.1.8 (1700.67) 32 BIT
    "The Operation could not be completed. No other information is available about the problem."
    Uploaded on google drive a series of project files. downloaded them and now the message above is what pops up effectively blocking me from my work. After talking with google support, they confirmed the successful upload and download with no file corruption. All file extensions are the same. Can someone please help.
    Sincerely,
    Butta Love

    Try the following..
    Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
    Download from Google and then decompress audio files..
    Now test in Logic and see if you get the same issue....

  • "The operation could not be completed" using iMovie 10.0.6

    I'm using the new iMovie 10.0.6 with OS X Yosemite 10.10.
    This is the first time I access to iMovie after upgrade to Yosemite.
    When I try to begin a new movie and after select a theme the following message is shown:
    "The operation could not be completed.
    No other information is available about the problem"
    The technical information obtained from the console is:
    "13/11/14 11:46:50,195 iMovie[702]: -[NSAlert alertWithError:] called with nil NSError. A generic error message will be displayed, but the user deserves better."
    So, I can't use iMovie as I expected...
    Is anybody have this problem ?
    Thanks

    I had the exact same problem, working with apple support I had to uninstall iMovie and all the files connected with it and then download iMovie again.  The problem is you iMovie is not creating the library file it needs to save your work.
    Apple support was great at walking me through which files had to be deleted.
    good luck
    Ron

Maybe you are looking for