The operation failed because of a protection agent failure. (ID 998 Details: The system cannot find the path specified (0x80070003))

Hello,
We are getting the following error when trying to backup our fileserver (DPM 2012 R2) to tape.
"The operation failed because of a protection agent failure. (ID 998 Details: The system cannot find the path specified (0x80070003))"
What is interesting:
- The "Short-Term Protection" to disk runs successfully without error
- The "Long-Term Protection" to tape fails after writing ~2TB of data to a TL2000 tape loader. (Always appears to fail towards end of job with the above error)
- In the past (until roughly a month ago) the tape portion of this job was completing successfully.
The DPM logs fail to give much information around the time of error regarding any failures. Likewise windows event logs give no hint of a problem when the job fails.
Looking for any ideas that may help resolve this.
Cheers!

Hi
Has it just started happening? What rollup version are you on currently?

Similar Messages

  • The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079))

    Recently we got this error, while backup to tape, and no idea what is it.
    What cause of this error?
    The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079)
    DPM 2010 with latest roll-up (KB2250444) | DELL Server R710 (Windows 2008 R2 SP1) RAM: 24GB PF: 36-60GB | DELL TL2000 (2 Drives) | And still struggling and monitoring... :(

    Hi,
    Try this workaround, increase the TcpMaxDataRetransmissions to 10 or more.
    How to modify the TCP/IP maximum retransmission timeout
    http://support.microsoft.com/kb/170359
    Diagnostic steps when "Semaphore timeout" is hit during network transfer:
    1. Check if the protected server (sender) or DPM (receiver) was under stress or inaccessible during the time of failure – from event logs from both the machines. Retry should work if the packet loss was because of either of the servers being inaccessible
    or under stress for a period.
    2. Check if the network between the PS and the DPM is flaky – retransmit count from ‘netstat –s’ or perfmon counters can give an idea.
    3. Else contact network support engineer to diagnose the packet loss issue – netmon captures from both machines, packet route and network layout/devices will be required to start the investigation.
    4. Take some performance monitor logs on both DPM and Proteted server side.
    Some good and basic perfmon counters to take to see if the servers are under stress are below.
    Logical Disk/Physical Disk
    \%idle
    • 100% idle to 50% idle = Healthy
    • 49% idle to 20% idle = Warning or Monitor
    • 19% idle to 0% idle = Critical or Out of Spec
    \%Avg. Disk Sec Read or Write
    • .001ms to .015ms  = Healthy
    • .015ms to .025 = Warning or Monitor
    • .026ms or greater = Critical or Out of Spec
    Current Disk Queue Length (for all instances)
    80 requests for more than 6 minutes.
    • Indicates possibly excessive disk queue length.
    Memory
    \Pool Non Paged Bytes*
    • Less that 60% of pool consumed=Healthy
    • 61% - 80% of pool consumed = Warning or Monitor.
    • Greater than 80% pool consumed = Critical or Out of Spec.
    \Pool Paged Bytes*
    • Less that 60% of pool consumed=Healthy
    • 61% - 80% of pool consumed = Warning or Monitor.
    • Greater than 80% pool consumed = Critical or Out of Spec.
    \Available Megabytes
    • 50% of free memory available or more =Healthy
    • 25% of free memory available = Monitor.
    • 10% of free memory available = Warning
    • Less than 100MB or 5% of free memory available = Critical or Out of Spec.
    Processor
    \%Processor Time (all instances)                                                                   
    • Less than 60% consumed = Healthy
    • 51% - 90% consumed = Monitor or Caution
    91% - 100% consumed = Critical
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))

    I keep getting the following error when trying to run a backup:
    The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))
    Any resolution to this issue is greatly appreciated. Thank you.

    Hi
    First we Need some more Informations.
    What are you trying to Backup?
    Has it worked before?
    Are there any Errors on the Agent Tab?
    Are there any Errors on the affectet Server in the Event Log?
    Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
    facebook.com/techguyat |
    youtube.com/techguyat

  • The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))

    For the past couple of days I have been getting the following alert on my tape backups:
    Cannot verify tape data.
    The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))
    It has completed the backup but I get this error when performing a verify or when I try and restore.
    This error only occurs on the same server we backup in the protection group. The other 5 servers backup fine.
    We are using DPM 2010 (3.0.8195.0)

    Same here.
    When I came back from vacation I found the same error in our DPM 2012.
    The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))
    I cannot find anything in the eventlog saying that the tapelibrary has been offline.
    How can I check that?
    Last nights tape-job went "almost" well, one server (VM) still has this error. (But I dont know if that depends on the fact that it had status "Missing" in hyper-v manager due to a Win-update shutdown on a host that had a  misconfiguration (auto-reebot).)
    I rebooted the DPM-server this morning and then I tried to manually run all tapejobs again but they get this status again.
    I do not understand this error and why it suddenly appears to work again for a scheduled job but not when I trigger the job manually.
    Is there not a solution for this?
    /Anders

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

    H,
    Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
    Event 1001
    Op Code NLS initialization
    The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
    We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now. 
    I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
    How do we ascertain the  cause of this error and the specific registry key that might be problematic?

    Hi,
    This could be caused by firewall rules or security softwares.
    http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
    And in addition, the fix is worth a try.
    Nothing happens when you double-click "Region" in Control Panel 
    http://support.microsoft.com/kb/2958845
    Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

  • Newsfeed error - The operation failed because the server could not access the distributed cache.

    Recently installed SharePoint 2013 RTM, on the newsfeed page an error is displayed, and no entries display in the following or everyone tabs.
    "The operation failed because the server could not access the distributed cache."
    Reading through various posts, I've checked:
    - Activity feeds and mentions tabs are working as expected.
    - User Profile Service is operational and syncing as expected
    - Search is operational and indexing as expected
    - The farm was installed based on the autospinstaller scripts.
    - Don't believe this to be a permissions issue, during testing added accounts to the admin group to verify
    Any suggestions are welcomed, thanks.
    The full error message and trace logs is as follows.
    SharePoint returned the following error: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException. Internal error code: 55. Contact your system administrator
    for help in resolving this problem.
    From the trace logs there's several messages which are triggered around the same time:
    http://msdn.microsoft.com/en-AU/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxHandling an exception. Exception details: System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in
    FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault)./LM/W3SVC/2/ROOT/d71732192b0d4afdad17084e8214321e-1-129962393079894191System.ServiceModel.FaultException`1[[Microsoft.Office.Server.UserProfiles.FeedCacheFault,
    Microsoft.Office.Server.UserProfiles, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]], System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089Unexpected exception in FeedCacheService.GetPublishedFeed: Object
    reference not set to an instance of an object..  
     at Microsoft.Office.Server.UserProfiles.FeedCacheService.Microsoft.Office.Server.UserProfiles.IFeedCacheService.GetPublishedFeed(FeedCacheRetrievalEntity fcTargetEntity, FeedCacheRetrievalEntity fcViewingEntity, FeedCacheRetrievalOptions fcRetOptions)
     at SyncInvokeGetPublishedFeed(Object , Object[] , Object[] )    
     at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)    
     at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not
    set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault).
    SPSocialFeedManager.GetFeed: Exception: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. ) : Correlation
    ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
    Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of
    an object.. ) : Correlation ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
    Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Social.SPSocialException: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException.
    Internal error code: 55.    
     at Microsoft.Office.Server.Social.SPSocialUtil.TryTranslateExceptionAndThrow(Exception exception)    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass48`1.<S2SInvoke>b__47()    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)

    Thanks Thuan,
    I've restarted to the Distrubiton Cache servicem and the error is still occuring.
    The AppFabric Caching Service is running under the service apps account, and does appear operational based on:
    > use-cachecluster
    > get-cache
    CacheName            [Host]
                         Regions
    default
    DistributedAccessCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedActivityFeedCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedActivityF [SERVER:22233]
    eedLMTCache_1e9f4999 LMT(Primary)
    -0187-40e8-aa92-f830
    8d47d6e9
    DistributedBouncerCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedDefaultCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedLogonToke [SERVER:22233]
    nCache_1e9f4999-0187 Default_Region_0538(Primary)
    -40e8-aa92-f8308d47d Default_Region_0004(Primary)
    6e9                  Default_Region_0451(Primary)
    DistributedSearchCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedSecurityTrimmingCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedServerToAppServerAccessTokenCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9

  • Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

    Following error i am getting after i chnaged the Path in Config File from
    \\vs01\d$\\Deployment\Files\temp.txt
    to
    C:\Deployment\Files\temp.txt
    [Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).". 

    I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
    Also from BOL (see section Usage Considerations - last bullet point)
    http://msdn.microsoft.com/en-us/library/ms141239.aspx
    * Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
    Make sure you take care of this as well.
    HTH
    ~Mukti
    Mukti

  • The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

    I am looking at an issue with users not getting specific group policies. 
    After searching a number of client computers I found that the following error
    The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
    I can find the folder in the Sysvol folder on all of the domain controllers. 
    The issue with end users seems to be that the proxy settings for internet explorer is not being applied. 
    Potential problems?
    one folder in sysvol entry is empty 
    \\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
    or is this our issue
    The old method of configuring proxy settings  to Internet Explorer 9 has changed?
    https://support2.microsoft.com/kb/2530309?wa=wsignin1.0 
    http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

    Hi all 
    In administering this policy I am a little confused. 
    We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
    I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

  • DPM Backups Fail on File Server, (ID 2033 Details: The System Cannot Find the File Spedcified (0x80070002)

    I've found a few treads and posts related to this error, but none of the answers seem to work. I have DPM 2010 U7 server backing up my file server (Server 2008 R2). The backup of the D: Drive(which hosts all shares) is failing with the following error:
    Affected area: D:\Occurred since: 4/23/2014 11:15:26 AMDescription: The replica of Volume D:\ on XXXXX.XXX.XX is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent. For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106) DPM encountered an error while performing an operation for \\?\Volume{bb191e08-5d62-4a60-85f1-cdbd7598976b}\XXXX\XXXXX\XXXX\XXXXX\XXXXX\XXXXX\XXXXX\XXXXX\XXXXX on XXXXXX.XXXX.XXX (ID 2033 Details: The system cannot find the file specified (0x80070002))
    I've ran SFC /SCANNOW on both servers, rebooted. Ran chckdsk /f on the D: on the file server, rebooted again. Still having the same issue. The BMR and System State backups run just fine, along with the backup of the C:
    I am getting the following error on the file server for volsnap.
    The shadow copies of volume D: were deleted because the shadow copy storage could not grow in time.  Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied.
    Which caused me to try moving the shadow copy storage to the C:, but then it just fails with the following error. Which makes since as the C drive is 136GB, while the D drive is 27TB. 
    The shadow copies of volume D: were aborted because the shadow copy storage failed to grow.
    Lastly I deleted the entire replica and recreated the protection, with no luck.  I tried to just slowly create the replica by adding one small parts at a time, currently its failing while trying to backup ~300GB. 
    I've checked the VSS Writiers on the file server, everything looks correct. Here is the print out.
    P:\>VSSadmin List Shadowstorage
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Shadow Copy Storage association
       For volume: (\\?\Volume{3c066165-11a2-11e3-ae8a-806e6f6e6963}\)\\?\Volume{3c0
    66165-11a2-11e3-ae8a-806e6f6e6963}\
       Shadow Copy Storage volume: (\\?\Volume{3c066165-11a2-11e3-ae8a-806e6f6e6963}
    \)\\?\Volume{3c066165-11a2-11e3-ae8a-806e6f6e6963}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 32 MB (32%)
    Shadow Copy Storage association
       For volume: (D:)\\?\Volume{bb191e08-5d62-4a60-85f1-cdbd7598976b}\
       Shadow Copy Storage volume: (D:)\\?\Volume{bb191e08-5d62-4a60-85f1-cdbd759897
    6b}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: UNBOUNDED (61488716%)
    Shadow Copy Storage association
       For volume: (C:)\\?\Volume{3c066166-11a2-11e3-ae8a-806e6f6e6963}\
       Shadow Copy Storage volume: (C:)\\?\Volume{3c066166-11a2-11e3-ae8a-806e6f6e69
    63}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 13.603 GB (10%)
    P:\>vssadmin list writers
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Writer name: 'Task Scheduler Writer'
       Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
       Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
       State: [1] Stable
       Last error: No error
    Writer name: 'VSS Metadata Store Writer'
       Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
       Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
       State: [1] Stable
       Last error: No error
    Writer name: 'Performance Counters Writer'
       Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
       Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
       State: [1] Stable
       Last error: No error
    Writer name: 'System Writer'
       Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
       Writer Instance Id: {57babf83-3fb0-41c0-b13a-0ec09543d852}
       State: [1] Stable
       Last error: No error
    Writer name: 'ASR Writer'
       Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
       Writer Instance Id: {2d4295b0-a282-4cd7-97af-ea394b845330}
       State: [1] Stable
       Last error: No error
    Writer name: 'FSRM Writer'
       Writer Id: {12ce4370-5bb7-4c58-a76a-e5d5097e3674}
       Writer Instance Id: {41c4fd48-af83-4ba8-9ca5-79820c055131}
       State: [1] Stable
       Last error: No error
    Writer name: 'Registry Writer'
       Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
       Writer Instance Id: {9a832588-4172-4f3a-bf44-363e128dfd74}
       State: [1] Stable
       Last error: No error
    Writer name: 'Shadow Copy Optimization Writer'
       Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
       Writer Instance Id: {9c184685-c43e-4a6b-9b34-e82020329b1a}
       State: [1] Stable
       Last error: No error
    Writer name: 'BITS Writer'
       Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
       Writer Instance Id: {e6db54bb-552e-4d8f-b26b-45aa03829fda}
       State: [1] Stable
       Last error: No error
    Writer name: 'COM+ REGDB Writer'
       Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
       Writer Instance Id: {2c326c9e-8727-4277-833a-ee2cb76b625e}
       State: [1] Stable
       Last error: No error
    Writer name: 'WMI Writer'
       Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
       Writer Instance Id: {e17f6d25-c8ad-4663-8511-c0d6a3413fe3}
       State: [1] Stable
       Last error: No error

    Hi,
    It is strange that the issue still exists after recreating backup.
    Please try again to clear all replica, and specifically, move the folder involved in this error to another location such as Drive C and see if issue still exists.
    Meanwhile please test if Windows Server Backup works or not. 
    If you have any feedback on our support, please send to [email protected]

  • Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    hi,
    am running the below command for moving sql serevr mdf and ldf files  from one  drive to another : c  drive to d drive:
    but am getting the below error
    SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
    use master
    DECLARE @DBName nvarchar(50)
    SET @DBName = 'CMP_143'
    DECLARE @RC int
    EXEC @RC = sp_detach_db @DBName
    DECLARE @NewPath nvarchar(1000)
    --SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
    SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
    DECLARE @OldPath nvarchar(1000)
    SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
    DECLARE @DBFileName nvarchar(100)
    SET @DBFileName = @DBName + '.mdf';
    DECLARE @LogFileName nvarchar(100)
    SET @LogFileName = @DBName + '_log.ldf';
    DECLARE @SRCData nvarchar(1000)
    SET @SRCData = @OldPath + @DBFileName;
    DECLARE @SRCLog nvarchar(1000)
    SET @SRCLog = @OldPath + @LogFileName;
    DECLARE @DESTData nvarchar(1000)
    SET @DESTData = @NewPath + @DBFileName;
    DECLARE @DESTLog nvarchar(1000)
    SET @DESTLog = @NewPath + @LogFileName;
    DECLARE @FILEPATH nvarchar(1000);
    DECLARE @LOGPATH nvarchar(1000);
    SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
    SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
    exec xp_cmdshell @FILEPATH;
    exec xp_cmdshell @LOGPATH;
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    go
    can anyone pls help how to set the db offline. currently  i  stopped the sql server services from services.msc and started the  sql server agent.
    should i stop both services for moving from one drive to another?
    note: I tried teh below solution but this didint work:
    ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
    Update:
    now am getting the message :
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    (3 row(s) affected)
    (3 row(s) affected)
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    First you should have checked the database mdf/ldf name and location by using the command
    Use CMP_143
    Go
    Sp_helpfile
    Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
    Database is already detached that’s why db offline failed
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    Attached step is failing as there is no mdf file
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
    Solution:
    Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

  • Inconsisten with the protected source The system cannot find the path specified (0x80070003)

    Hi,
    we are getting an error with the DPM server, the disk is on the same server, other disk have no issues
    The replica of Volume H:\ on backup.domain.eu is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but
    new recovery points cannot be created until the replica is consistent. 
    DPM encountered an error while performing an operation for \\?\Volume{5d0ecad1-5d88-47eb-8a5c-13dddaf0d41e}\app\invoice\ on backup.domain.eu (ID 2033 Details: The system cannot find the path specified (0x80070003))
    we did a consistency check twice and a disk scan, even deleted the backup and recreated it

    Hi,
    From the following article, you can first try a consistent checking:
    Replica inconsistent
    https://technet.microsoft.com/en-us/library/bb809059.aspx
    To perform a consistency check
    In DPM Administrator Console, click Protection on the navigation bar.
    In the Display pane, select the protection group member for which you want to perform a consistency check.
    In the Actions pane, click Perform consistency check.
    In the dialog that notifies you that a consistency check is a lengthy operation, click OK.
    If it failed, please try to manually synchronize a replica as referred in this article:
    How to Synchronize a Replica
    https://technet.microsoft.com/en-us/library/bb795867.aspx
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • MDT2012 - Deployment failed, the system cannot find the file specified

    Hi everybody. 
    First, excuse me for my english, i think it's not the best thing I'm able to do, but now, I REALLY need help. 
    I encounter issues with my MDT 2012 Update 1 platform. 
    I have 5 systems to capture. All systems have 3 partitions (System, softwares, data). Capture is working fine for all parts. 
    In my Task Sequence, to deploy these images (C, D and E parts), I use a script after the "Install Operating System" which runs imagex to deploy the WIM images for D: and E:. 
    The script is the following : 
    "%DeployRoot%\Tools\x64\imagex" /apply "%DeployRoot%\Operating Systems\D_Drive\D_Drive.wim" 1 %DDrive%"
    But, for some images, the task fails on the "D" drive deployement. The wizard shows the following error : 
    Litetouch deployment dailed, return code = -214767259 0x80004005
    Failed to run the action: InstallD (ie : the script above)
    The system cannot find the file specified. (Error: 00000002; Source: Windows)
    The error is on my task which uses imagex to deploy my D and E WIM.
    So I looked to see if the file's path was the good one. 
    And it is !!!
    Wizard says that the file couldn't be find, but the file is existing, and in the good path. 
    For your information, there is no problem when I don't use multicast. Everything is working fine on unicast, not on multicast. 
    I even encounter this issue if I use my MDT server and my computers on the same switch. 
    Any help would be gratefull, my client gives me the week to resolve the issue. 
    Thanks 

    BDD.LOG
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Will boot into Windows PE architecture x64 to match OS being deployed.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Open Control File: OperatingSystems]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[------  Applying Windows image using ImageX.exe ------]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41023 sent: LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property SourcePath is now = \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1348)]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Started.
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Complete [0x0].]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer of "\\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim" to "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" completed successfully.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Cleaning off old operating system]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Skipping V:\Drivers]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"    \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Enabling 8dot3 name support on volume V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\imagex.exe"  /apply "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" 1 V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread=""
    file="LTIApply">
    <![LOG[Command has been started (process ID 536)]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > ImageX Tool for Windows]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   1% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   2% ] Applying progress ]LOG]!><time="17:00:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   3% ] Applying progress ]LOG]!><time="17:00:58.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   4% ] Applying progress: 5:28 mins remaining ]LOG]!><time="17:01:03.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   5% ] Applying progress: 5:33 mins remaining ]LOG]!><time="17:01:07.000+000"
    <![LOG[  Console > [  99% ] Applying progress: 3 secs remaining ]LOG]!><time="17:06:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [ 100% ] Applying progress ]LOG]!><time="17:06:50.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Successfully applied image.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Total elapsed time: 6 min 7 sec]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property LTIDirtyOS is now = TRUE]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 5625 sent: The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\bootsect.exe"  /nt60 V:]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1252)]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Target volumes will be updated with BOOTMGR compatible bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > V: (\\?\Volume{2ab15dec-99c9-19e3-baf6-94de80bab573})
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console >     Successfully updated NTFS filesystem bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Bootcode was successfully updated on all targeted volumes.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Find the boot drive (if any) [True] [6.1.7601.18229] [False]]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"    \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDisk : \\MININT-1H9O4H6\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found bootable drive (No Boot File Test) [ V: ]: \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Ready to Prepare boot partition: V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: cscript.exe //nologo "\\192.168.36.208\MDT$\Scripts\ztiRunCommandHidden.wsf" ""\\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe" V:\windows /l fr-fr  /s V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread=""
    file="ztiRunCommandHidden">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[About to run command: \\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe V:\windows /l fr-fr  /s V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has been started (process ID 1984)]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[  Console > Boot files successfully created.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has returned: 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Run Command: X:\WINDOWS\SYSTEM32\bcdedit.exe /Store "V:\boot\bcd" /timeout 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCD> The operation completed successfully.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Created scratch folder.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copy File: C:\MININT\unattend.xml to V:\Windows\Panther\Unattend.xml]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copied unattend.xml to V:\Windows\Panther for image apply.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: dism.exe /Image:V:\ /Apply-Unattend:V:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1516)]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Deployment Image Servicing and Management tool]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Image Version: 6.1.7600.16385]LOG]!><time="17:06:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > The operation completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command completed, return code = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
    <![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property RetVal is now = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Already connected to server 192.168.36.208]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LiteTouch.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LiteTouch.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTIApply.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTIApply.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTICopyScripts.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTICopyScripts.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\PnpEnum.xml to \\192.168.36.208\Logs$\MININT-1H9O4H6\PnpEnum.xml]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\Wizard.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\Wizard.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIBDE.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIBDE.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIConfigure.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIConfigure.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDiskpart.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDiskpart.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDrivers.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDrivers.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIGather.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIGather.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTINextPhase.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTINextPhase.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIPatches.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIPatches.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ztiRunCommandHidden.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ztiRunCommandHidden.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIValidate.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIValidate.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG to \\192.168.36.208\Logs$\MININT-1H9O4H6\SMSTS.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\Debug\Netsetup.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\System32\wpeinit.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying log C:\MININT\SMSOSD\OSDLOGS\BDD.log contents to \\192.168.36.208\Logs$\MININT-1H9O4H6\BDD.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

  • _Media creation failed with error message: 'The system cannot find the path specified.'

    SCCM 2012 R2 CU2 all latest patches.
    I attempted to create a task sequence media and I get the error in the screenshot below. I have deleted and recreated the operating system,boot image, driver pack and task sequence. The usb media is 16GB and the task sequence size is 3004MB.
    I only see the error in CreateTSMedia.log as below. How do you fix this?
    <![LOG[Beginning media generation]LOG]!><time="12:37:44.522+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:418">
    <![LOG[Partition activated]LOG]!><time="12:37:47.720+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="diskvolume.cpp:849">
    <![LOG[Finished formatting volume F:\]LOG]!><time="12:37:55.723+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:772">
    <![LOG[Assigning staging directory to F:\]LOG]!><time="12:37:55.724+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:1122">
    <![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:476">
    <![LOG[  Beginning pass to compute volume layout]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:479">
    <![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:487">
    <![LOG[Setting up new volume]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1297">
    <![LOG[WriteVolumeId()]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1038">
    <![LOG[Failed to create media (0x80070003)]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="3" thread="4668" file="createtsmedia.cpp:345">
    <![LOG[CreateTsMedia failed with error 0x80070003, details='']LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="createtsmedia.cpp:355">
    <![LOG[MediaGenerator::~MediaGenerator()]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:396">
    <![LOG[Media creation process that was started from Admin Console completed.
    ]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4772" file="createmedia.cpp:1065">
    <![LOG[CreateMedia.exe finished with error code 80070003]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="2" thread="4772" file="createmedia.cpp:1123">

    Hi,
    Error code 0x80070003 = "The system cannot find the path specified."
    Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))

    DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
    Can I know what this mean? It completely fail all entire job.
    Backup was on half way go, it already took about 3TB data and it fail.

    Hi Oneoa,
    Please verify the antivirus exeptions. Look at this two links for more information:
    http://technet.microsoft.com/en-us/library/ff399439.aspx
    http://support.microsoft.com/kb/928840
    I hope this solves your problem, please post your progress so I may assist you further.
    Best Regards
    Robert Hedblom
    MVP DPM
    Check out my DPM blog @ http://robertanddpm.blogspot.com

Maybe you are looking for

  • Monitoring servlets through SNMP Servlet Runtime Table

    Is it possible to check or monitor a servlet/jsp using SNMP traps (counter, attribute change, etc). If so can you provide a sample set up for values such as the MBean Name, MBean Type, MBean Attribute. Thanks, Juan

  • Delete pnp warning

    Hallow I have warning (in check) when I use the logical database pnpce All time in all program How I delete it This is the description regards In Unicode programs, the "-" character cannot appear in names, as it does here in the name "PNP-SW-IGNORELO

  • No Internet: DHCP works, but no IP.

    I don't know what exactly caused it, but this was within the recent few weeks. Symptom: No IP address, even though DHCP (dhclient and dhcpcd) works perfectly. After invoking dhcpcd and obtaining an IP, ifconfig still shows nothing. I don't know if it

  • Import/Merge/Recreate Photo library?

    My G5 died. It had iPhoto '08, quite a few albums, and about 10 gallery albums. I also have a MacBook (which currently only has iPhoto '06, but I'll install iPhoto '08 - as long as it's intel compatible, which I'm guessing it is.) The MacBook has a s

  • Saving files as Black & White Scalable or Windows Meta File using hp scanjet 4570c scanner

    I have a hp scanjet 4570c Scanner that I need to be able to save or convert scans to Black & White Scalable or Windows Meta Files to use with our Engraving Machine. We had a hp scanjet 4400c that used Precision 3.1 Software and it could save a scan a