The option to save all tabs does not appear to work in ver 4. the promt is missing at sut down. How is this corrected?

In ver 3.6 there was a prompt at shut down to save tabs. It seems that option is gone in ver 4. How can I fix this?

One of the changes in Firefox 4: '''''by default''''' Firefox 4 does not display the warning message when closing multiple tabs, but it can be turned back on by changing some preferences. ''<u>Note: This was a decision by the developers. On this forum, we are all '''uncompensated volunteers''' here to help other users. The developes/employees of Mozilla/Firefox rarely, if ever visit here.</u>''
#Type '''''about:config''''' in the URL/Location/Address bar and press the Enter key
#Accept the warning message (promise to be careful)
#The preferences page/list will open
#Filter = '''''browser.tabs.warnOnClose'''''
#If its value is set to false, double-click on it (in the lower panel) to toggle its value to true
#Repeat steps 4 and 5 for these following 3 preferences also:
#*'''''browser.warnOnQuit'''''
#*'''''browser.warnOnRestart'''''
#*'''''browser.showQuitWarning'''''
#**Note: last pref is new in Firefox 4b12, may need to add (boolean)
#**Info/Instruction for using '''''about:config''''': http://kb.mozillazine.org/About:config
#See:
#*https://support.mozilla.com/en-US/questions/785169
#*http://forums.mozillazine.org/viewtopic.php?f=23&t=2105039&p=10434467&sid=fd2a35945bb2c633687f7b50d8c53989
#*http://blog.zpao.com/post/3174360617/about-that-quit-dialog

Similar Messages

  • HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    Because line-in has been removed.
    It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
    You'll need to use a Griffin iMic or similar to use line-in via a USB port.
    The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

  • We have acrobat 11 and office 13.  In word the Adobe tab does not appear in the ribbon

    we have acrobat 11 and office 13.  In word the Adobe tab does not appear in the ribbon

    You have to update AA XI to work with AA 2013. You may also have to open the OFFICE tools and enable the add-ons. There is no tool in some of the OFFICE applications. You can check the list in the PDF Maker folder in Acrobat.

  • " mirror tab" does not appear on menu in Android beta version, as described in help topic on mirroring a webpage on tv via Chromecast..

    Downloaded Firefox Beta for Android because I read about its support for Chromecast. I'm running Android ver. 4.2.1 on an ASUS TF700t tablet. I get that the Firefox menu is hidden because my tablet has a 3-dot menu, which I can access via Tools on the device menu. But Mirror Tab does not appear on the Tools menu.
    Thanks
    Joel

    Hi joelgibbs,
    Thank you for your question. This is something that we are still working on. [https://bugzilla.mozilla.org/show_bug.cgi?id=1084128 Keep track of progress] but keep in mind [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html]

  • Crystal 8.5 (Minimum function in the function tree does not appear to work)

    HI I would greatly appreciate some help with this problem I am having.
    I am creating a report in which there is a group of records printed . Within each record there could be any number of results related to that record of which I want to extract both the maximium and minimum value and print these. This bit is fine as I do this using the maximum and minimum function available within the summary function.
    However with each of these max and min values calculated and printed I then want to create a footer that adds all these max and min values up. (This is not immediately possible using the 'summary function' max and min values as they are not presented on the 'Field explorer' dialog box for selection.
    However I can individually using the maximum 'tree function' get the report to store these values so that I can do the calculations once I have got to the footer (as the  fields defined are accessible through the field explorer. But the same minimum function does not appear to extract a result (and no I do not have zeros in the data).
    Is there a known problem with the minimum function?
    Is there another way of getting this data?
    Thank you in advance
    seyviv

    Hi Debi, it would be easier for mean to demonstrate what I wnat/am doing in the report by use of data.
    I have a file with a list of sample results. There may be many results for one sample. ie
    Sample      Result Number      Result
    98-01          1                           3
    98-01          2                           5
    98-01          3                           6
    98-02          1                           3
    98-02          2                           7
    98-02          3                           9
    98-03          1                           4
    98-03          2                           5
    98-03          3                           11
    On the first page I want to see the max and min values across all samples listed for each result number. Then as a total value (once all the result numbers max and mins are displayed I want to perform a calculation on the max and min values displayed in the list (ie. max 4 + 7 -11  and for min 3 + 5 - 6)  
                          Result 
                          Number        Max           MIn 
                          1                    4                3
                          2                    7                5
                          3                    11              6
    Result of                             0                2
    Calculation
    I have been able to do this for the max values but the minimum function does not work.
    How I currently extract this data is that I use a 'Summary field ' to calculate the max and min values in the list. However to get the data for the calculation at the bottom I use the 'Formula fields' to extract the values listed for all the results for 'result number 1, 2 & 3' and then use the 'Function tree' to get the 'Maximum value for each individual result number and then finally do a calculation on the max values. However, the same minimum function does not appear to work.
    I hope this explains what my problem is.
    Thank you in advance of any suggestions you may have
    Regards
    Viv

  • Software tab does not appear in settings on IPad

    software tab does not appear in settings on ipad - how do I update software

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • CHARM Tab does not appears -- solution manager

    Hi Experts,
    I want to configured CHARM but in tx SOLAR_PROJECT_ADMIN in System Landscape -- Change Request Tab does not appear
    Also tx  solar01 is locked! the project doc for example . But in scope a have not checked the link.
    Any clue?

    Hello,
    In SOLAR_PROJECT_ADMIN  are you creating a project or runing an analysis?
    The Analysis screen is not tabbed, it is a tree.
    Change request management apears under Solution.
    When you create a project, there is not a Change Management Tab.
    So are you refering to creating the project or performing the Analysis?
    Regards,
    Paul

  • Calendar tab does not appear in iTunes iPod preferences

    The calendar and contacts tab does not appear when I go to preferences in iTunes with my iPod is attached. I am running 10.3.9. I have rebuilt permissions and trashed prefs. Are the tabs a 10.4 feature? They seemed to be a part of iTunes 5 so I suspect they should be there. I have read about using iSync on the posts but would prefer it happen automatically when I plug my new iPod in. Thanks for any help you can give me.

    Quote from the page below "If you are using Mac OS 10.3.9 or earlier, you cannot use iTunes to sync contacts and calendars to iPod"
    You can check out the page for details: http://docs.info.apple.com/article.html?artnum=301374

  • HT201240 This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I

    This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I created.  I am logged in as myself and it states that I am an "Admin".  The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users. 
    Can someone help me?  I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on?  What if this were my child?  This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
    Any help would be appreciated.  (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
    Thanks.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

    Hi guys,
    I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
    I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
    lets start from the low level troubleshooting done:
    - plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
    - booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
    In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
    I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
    what I've ruled out:
    -HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
    -BIOS has zero options for graphics card options.
    Any ideas before i RMA this laptop? I'm at a loss. 

    OP's problem has been solved.  Also please don't resurrect and do not hijack other people's topics. Open your own one.
    >>Please read and comply with the Forum Rules.<<
    Topic Locked

  • exception-type in web.xml does not appear to work

    WLS 60 SP1 (#101616)
              <exception-type> in web.xml does not appear to work. WLS shows standard
              "Internal error 500" page instead of a custom error page. The custom error
              page is shown if <error-code> is used instead of <exception-type>.
              Any ideas? Thanks
              

    Can you show me some of your code? This works for me.
    Also, you say that you are working with 6.0sp3. Are you sure? sp3 hasn't been
    released yet, except in a very limited beta. (I believe only internally, but I
    could be wrong about that.)
    David
    [email protected] wrote:
    Hi all,
    I have created a very simple servlet and an index.html file with a link
    to it, then packaged it into a WAR file with the appropriate web.xml and
    ias-web.xml files. I then created an application.xml file referencing
    only this servlet and adding a context root. After deployment via
    "iasdeploy deployapp simple.ear" and cycling the web server, I can reach
    the welcome file (index.html) correctly
    -"http://localhost/NASApp/simple". When I attempt to follow the link to
    the servlet ("simple servlet") the URL ends
    up as "http://localhost/NASApp/SimpleServlet" whereas it should be
    http://localhost/NASApp/simple/SimpleServlet If I type that url in, the
    servlet executes fine.
    I've deployed this into Tomcat and get the behavior I expect. It appears
    that the element in the application.xml file is ignored by
    iAS.
    I'm using iAS SP3 on Win2k (same problem on NT).
    This is such a basic behavior that I can't believe this is an existing
    bug. I must be doing something wrong...
    Any ideas?
    Thanks in advance,
    -Glen
    Files are attached.
    Name: simple.ear
    simple.ear Type: application/x-unknown-content-type-ear_auto_file
    Encoding: base64
    Description: filename="simple.ear"

  • Hashmap containsKey() method does not appear to work

    Hashmap containsKey() method does not appear to work
    I have an amazingly simple custom class called CalculationKey, with my own amazingly simple custom equals() method. For some reason when I call my containsKey() method on my HashMap it does not use my defined equals method in my defined key class. Do hashmaps have their own tricky way for establishing whether two keys are equal or not?
    THIS IS MY AMAZINGLY SIMPLE CUSTOM KEY CLASS
    private class CalculationKey
    private LongIdentifier repID;
    private LongIdentifier calcID;
    public CalculationKey(LongIdentifier repID, LongIdentifier calcID)
    this.repID = repID;
    this.calcID = calcID;
    public boolean equals(Object o)
    CalculationKey key = (CalculationKey)o;
    if (key.getCalcID().equals(calcID) &&
    key.getRepID().equals(repID))
    return true;
    else
    return false;
    public LongIdentifier getCalcID()
    return calcID;
    public LongIdentifier getRepID()
    return repID;
    THIS IS MY AMAZINGLY SIMPLE CALLS TO MY HASHMAP WHICH ADDS, CHECKS, AND GETS FROM THE HASHMAP.
    private Hashmap calculationResults = new Hashmap();
    public boolean containsCalculationResult(LongIdentifier repID, LongIdentifier calcID)
    if (calculationResults.containsKey(new CalculationKey(repID, calcID)))
    return true;
    else
    return false;
    public Double getCalculationResult(LongIdentifier repID, LongIdentifier calcID)
    return (Double)calculationResults.get(new CalculationKey(repID, calcID));
    public void addCalculationResult(LongIdentifier repID, LongIdentifier calcID, Double value)
    calculationResults.put(new CalculationKey(repID, calcID), value);
    }....cheers

    You can make a trivial implementation to return a
    constant (not recommended)What do you mean by that? Hmm.. I guess you mean that
    you shouldn't use the same constant for all objects?
    But don't see the int value of an (immutable) Integer
    as constant?
    /Kaj
    You can write hashCode to just always return, say, 42. It will be correct because all objects that are equal will have equal hashcodes. Objects that are not equal will also have equal hashcodes, but that's legal--it just causes a performance hit.
    The value is that it's really really simple to implement: public int hashCode() {
        return 42;
    } So you can use it temporarily while you're concentrating on learning other stuff, or during debugging as a way to confirm that the hashCode is not the problem. (Returning a constant from hashcode(), rather than computing a value, is always legal and correct, so if something's behaving wrong, and you replace your hashCode method with the one above, and it still breaks, you know hashCode isn't the problem.)
    The downside is that you're defeating the purpose of hashing, and any non-trival sized map or set is going to have lousy performance.
    For a decent hashCode recipe, look here:
    http://developer.java.sun.com/developer/Books/effectivejava/Chapter3.pdf

  • 'Find' function does not appear to work in TextEdit on .txt documents

    Most of the time the 'Find' function on the TextEdit application does not appear to work on .txt documents.  I have verified this by using Find on words that I know are in a document, and it cannot find them.  I've tried different options on the 'Find' function without success.  This appears to have started with version 10.6.8.  Has anyone else had this problem since upgrading to 10.6.8?

    Thanks -- but I swear it worked fine prior to either the 10.6.7 or 10.6.8 updates and now it doesn't.  I'll just keep experimenting and playing around with it and see if I can get it to work.  Maybe the new Lion O.S. coming out will fix it, although I'm not going to rush -- I made the mistake of putting Snow Leopard on right after it came out and had problems with some programs not working properly anymore (like Pro Tools, for example).  Always a good idea to hold off until most of the bugs get fixed. 

  • GetColumnAt(index) does not appear to work

    I am attempting to place a simple Icon in a dataGrid using
    cellRenderer. My problem is that
    'myDataGrid.getColumnAt(index).cellRenderer' does not appear
    to work. Most of the forum examples create arrays with AS and don't
    show this example. I already use XMLConnector (which works fine)
    the problem is referencing a column after the fact. I can do this
    when creating column smanually but not using getColumnAt(index).
    My code block:
    import mx.controls.gridclasses.DataGridColumn;
    import mx.controls.gridclasses.DataGridRow;
    import mx.core.UIComponent;
    playlist_dg.cellRenderer = "IconCellRenderer";
    playlist_dg.getColumnAt[3].cellRenderer = "IconCellRenderer"
    Any help is appreciated. cellrenderer is a bit hairy
    Mitch

    this is either a blindingly stupid question (for which I
    apologise) or a legit bug. Either response would put my mind at
    rest.
    Thanks
    Hillcreative

  • The password save prompt box does not appear on logging in to certain password protected webpages; is there another way of adding their passwords to Firefox sync?

    Dear Firefox tech supporter,
    I am Currently running:
    Firefox v6.0.2;
    Windows 7 fully updated at 19 Sept 2011 15:45 GMT;
    Norton Internet Security 2011 (using Identity Safe) fully updated at same time as Windows 7;
    Extensions to Firefox-
    Norton Toolbar 2011.7.1.3;
    Symantec IPS 3.1;
    Add to Amazon Wish List Button 7.1;
    Minimap Addon 0.3.13
    Plugins
    The usual suspects from Microsoft, Adobe, Wacom, Apple and Google, all of which are checked and no updates currently found.
    With webpages such as <https://shop.avanquest.com/members/?company_rs=51>, PayPal and Windows Live e.g. after correct login details are entered into the online form and login is performed successfully. The "key" symbol does not appear to the left of the "awesome bar", neither does the password save pop up box and so the login details for the site cannot be saved in Firefox sync.
    This is not specific to https secure sites, as I have been able to save the passwords for several https secure sites and conversely, I have been unable to save the passwords for some http non secure URLs. I have ensured that, whilst trying to enter a page or site into Firefox sync, it has the only tab open.
    There does not seem to be a way of manually entering website details (URL, User Name, Password etc.) into Firefox Sync; how can I save the password details for such sites?
    Thanks in advance for your help,
    Chris Morris

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    To see all History and Cookie settings, choose:
    *Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"
    *Tools > Options > Security: Passwords: "Remember passwords for sites"
    See also:
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

Maybe you are looking for

  • Lost ability to SSH & Ping without changing configuration

    Howdy - hoping someone with a bigger brain than I can help me figure this out. I had a problem with the recent storms wiping out my ADSL & phone line. The phone co. got my line and connection back up, and I can get outbound connections fine (e.g., em

  • Is there a way to find version for customizing objects?

    hi Since we dont have version management for customizing objects like we have for programs or r/3 repository is there a way or some uitlity to find the version of customizing objects? ~Suresh

  • Error While verify the Domain for the Phone Phone Enrollment.

    Hi I am using Custom Domain In office 365 and in Intune for the Mobile device Management. for Auto Server detecting while enrolling the Windows Phone/Device ,while I am verifying the Domain getting below error. in Office 365 Portal and Intune Account

  • Update 2.0.1 Made my Apps Useless

    I ran the update two days ago. Since running the update none of my apps work. All the App icons are still there but when you select an app it just tries to start but is unsuccessful and just pops back to the home screen. ALL DOWNLOADED APPS ARE DOING

  • How are these effects being done?

    I just took apart the individual pieces of artwork that make up the button on the left side of the attached image. The shine seems to be made from the separate pieces that are grey with the blending mode set to screen in the Transparency panel. 1. Wh