The ordinal 282 could not be located in the dynamic link lirary IERTUTIL.DLL

Hi all
I've installed the latest Updates on my SBS 2011 machine yesterday.
And now I get the "The ordinal 282 could not be located in the dynamic link library IERTUTIL.DLL" error when I try to start the IE.
Any idea?
Best regards, Chris

Hi Chris,
Would you please let me know the version information of IE? Did you install any update for the IE? Please navigate
to C:\Windows\System32 and check if IERTUTIL.DLL file exists?
On current situation, please run
sfc /scannow command to scan all protected system files. Any find?
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

  • Getting error: "The ordinal 449179364 could not be located in the dynamic link library WINMM.dll"

    So when I start rendering a video, I get the message:
    "The ordinal 449179364 could not be located in the dynamic link library WINMM.dll."
    This is followed by a "transcoder error" message, and then an application crash.  I looked for WINMM.dll, and found it here:
    C:\Windows\winsxs\x86_microsoft-windows-audio-mmecore-base_31bf3856ad364e35_6.1.7600.16385 _none_b5b6125db303b0f8
    Has anyone encountered this before, or found a solution?
    Many thanks.

    When sharing burn the project to a Folder rather than Disk. Does this complete? If so use something like ImgBurn to write your DVD from that folder.
    What brand of disk are you using (ImgBurn can tell you)?
    You seem to have covered many of the basics, but here is my usual list (I don't recall seeing you mention your graphic/sound drivers). It will be handy to see the Gspot analysis.
    Some basics:
    Install all Windows Updates.
    Install latest version of Apple QuickTime (v7.6.7 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
    Install most recent graphics and sound drivers from the manufacturers web sites.
    Run Disk Cleanup.
    Run Defragmenter.
    Temporarily disable any anti-virus realtime scanning.
    Use the GSpot Codec Information Utility to analyse the file and post screen image.
    Post back here with the necessary information described here: Got a Problem? How to Get Started
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • The ordinal 303 could not be located in the dynamic link library iertutil.dll

    As discussed in
    http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/getting-error-using-rdc-the-ordinal-303-could-not/86d4479e-3152-4052-a959-1f86fe608774we are experiencing an issue with patch 2956283.  After rebooting, our users can no longer
    use IE and receive the error "The ordinal 303 could not be located in the dynamic link library iertutil.dll".  I have seen this on several machines and it may involve Lync.   The title of the error is "Microsoft Lync: communicator.exe
    - Ordinal Not Fount".  After removing 2956283 everything starts working again.  Any fix for this?  It appears to be pretty wide spread based on the posts in the previously mentioned forum. 

    Hi Frank,
    Why did you install that package for your system? Did you encounter the issue in the article below?
    Internet Explorer 11 crashes when you turn on or turn off Enterprise Mode in the Tools menu
    http://support.microsoft.com/kb/2956283
    If no, please uninstall it.
    If yes, check the following settings:
    1. Press WIN+R to open the Run window, type
    SystemPropertiesAdvanced and press Enter.
    2. Click the environment variables... button.
    3. Find the path variable and check if c:\windows\system32 (or
    %SystemRoot%\system32) is present between all the paths.
    If not, add it at the end of the entire string (preceded by a semi colon) and click Always ok.
    4. Check if you have got IERTUTIL.DLL in c:\windows\system32.
    Karen Hu
    TechNet Community Support

  • The ordinal 139 could not be located in the dynamic link library iertutil.dll

    I am getting this error while launching IE on my computer:
    The ordinal 139 could not be located in the dynamic link library iertutil.dll
    I have IE 11 installed on windows7 32 bit.

    Hi Bansal,
    When does this error start to occur? Check Event Viewer and see if we could find any other messages.
    Take a try with the SFC command:
    Use the System File Checker tool to repair missing or corrupted system files
    Further, try the following if SFC won't help:
    How to repair or reinstall Internet Explorer in Windows
    Best regards
    Michael Shao
    TechNet Community Support

  • Failure to configure windows updates. Reverting changes.....ordinal 282 could not be located in the dynamic link library

    Hi,
    My laptop (Lenovo Amd athlonII P360 dual-core processor) with OS windows 7 shutdown accidentally during updates. From then on I could log in to my system but it keeps popping up some error messages like....
    tpsdsvc.exe-ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
    concentr.exe--ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
    AdobeARM.exe----ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
    .Net EventWindow...MFManager.exe----ordinal not found----ordinal 282 could not be located in  dynamic link library iertutil.dll
    SLRuntime.exe---ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
    IDVault.exe---ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
    when I try to open IE browser..it pops up ieexplorer.exe------ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
    My chrome browser stopped working...it opens but when I type any url...it just stays inactive...nothing happens
    Even I'm unable to uninstall chrome through control panel. Nothing happens. I'm writing this through mozilla firefox. And even i cant update this browser. It says firefoxInstalle.exe---ordinal not found.
    It always gives install update notification but when i try to install updates...it says failure to configure windows updates. reverting changes...
    so far i tried sfc /scannow, restore points, safe mode, iertutil.dll file exists in c:/windows/system32...etc,.
    I appreciate any solution on how to fix this problem and what is causing it?

    Hi sravy,
    Would you please let me know whether refer to Susan’s suggestion and check if it may be a hardware/harddrive
    issue? Any find?
    à
    My laptop (Lenovo Amd athlonII P360 dual-core processor) with OS windows 7 shutdown accidentally during updates.
    Did you find any dump file after the Windows 7 crashed? If find dump file, please refer to following KB and
    check if can help you to analyze the dump file.
    How to read the small memory dump file that is created by
    Windows if a crash occurs
    In addition, as Susan said, this forum is for Small Business Server. Based on your description, your problem
    was just occurred in Windows 7 OS. I suggest that you would post your question in
    Windows 7 Forum. I believe we will get a better assistance there.
    Hope this helps.
    Best regards,
    Justin Gu

  • I am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in teh dynamic link library SQLite3.dll"

    I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll"  Any ideas what my problem is?

    Hi whatsthe77,
    Welcome to Apple Support Communities.
    You may want to follow the steps in this article to reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Have a great day,
    Jeremy

  • Acrobat.exe Ordinal not found - the ordinal 20 could not be located in the dll pcre.dll.

    I have a user using Adobe 9 Pro (v. 9.3.4).  This user received an error stating:  "the program can't start because of xerces-c_2_5_0.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried replacing that particual dll, which didn't work, and then uninstalled and reinstalled Adobe 9 Pro.  Before installing the updates to bring the user back up to 9.3.4, I opened Adobe Pro and received the error in the subject.
    We are working in a Windows 7 environment with Office 2007.  I do not want to update the user to the latest and greatest version of Adobe Pro because they would then not be compatible to use some of the USPTO websites/Patent websites (so I am told).
    Does anyone have any suggestions?   I would appreciate it!

    There is a similiar thread on this error here:
    http://forums.adobe.com/message/3130433?tstart=0
    I Have users having this same problem as well, but with acrobat 7.x as well as 9.x.
    Do you know if your user is using "LexisNexis® PatentOptimizer"?
    As in my testing at least on one pc uninstalling PatentOptimizer cleared up the error.

  • Ordinal 459 could not be located in dynamic link library.urlmon.dll What the heck is this and how do I fix it?

    I get the following message:the ordinal 459 could not be located in the dynamic link library. urlmon.dll. I get this when requesting list links within a genealogy program (not on the internet) Haven't noticed it on anything else yet because I have been obsessing over just that one program. At the same time I notice that my windows sidebar is not visible. Have not changed any settings. Java was disabled due to the recent exploitation. Would that have something to do with it. Or perhaps Firefox18 installed and then it went bad? Thanks in advance for any help. Running Vista.

    If this issue is caused after you have applied MS13-008 which is a security update then I would think that this is a Firefox issue and that something changed and they have to find a new way to do what they where doing before the update.
    However since the error message states it can't find the file urlmon.dll has anyone checked on why this file is missing or why it is not registered? Since URLMON.DLL is not updated by MS13-008 I would suspect this could be a coincidence.
    Here is a related Microsoft KB article about that dll causing similar issues with IE and how to address it.
    http://support.microsoft.com/kb/281679
    I mean a quick google of that exact error message "The ordinal 459 could not be located in the dynamic link library urlmon.dll" has results of this problem going back to at least 2011 long before MS13-008 was released. There are a number of solutions as well for different situations posted.
    It may be worth checking some of those is the Microsoft KB above doesn't help.
    And yet I am left thinking that Tyler's statement from January 16 about it being reported by other uses and apparently being caused by malware is the most likely reason for this issue. He does know Firefox rather well, and he is an employee of Mozilla. So I really would start with his suggestions of checking out their KB's he listed:
    https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware
    https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

  • The Ordinal 572 Can not be located

    Hello I need help, I have a Toshiba Satellite L455D-S5976 over 5 years old. I may have deleted what ever is popping up ,(sound just like a women) ...
    But the same words keep popping up  {The Ordinal 572 could not be located in the dynamic link library iertutil.dll. } What is this? And how do I get it back?
    I have no sound card as well , I can't hear anything it stopped about 4 weeks ago. Thank you

    Satellite L455D-S5976
    The Ordinal 572 could not be located in the dynamic link library iertutil.dll.
    What are you doing when the message occurs? Can you repeat it on demand?
    Please attach a picture of that message to your reply so we can tell where it comes from.
    I have no sound card
    Open Device Manager (devmgmt.msc) and expand Sound, video and game controllers. Anything unusual in there? We like to see pictures.
    -Jerry

  • Ordinal 96 could not be located

    Windows 7 32-bit.  Installed Practice Master case management palm conduits. When I try to open Hotsync manager I get the following error message.
    The ordinal 96 could not be located in the dynamic link library CONGMGR.dll.
    Was able to sync to Palm Desktop before that.  Spent hours with PM support, am on hold right now, with no success in syncing.  First problem was getting conduits installed, now above message.
    Anyone fixed a ordinal 96 issue, and how?
    Post relates to: Treo 755p (Sprint)

    You might need to talk with the authors of the program, not Palm!  
    It was able to sync before on Windows 7, or another version of Windows?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Ordinal 215 could not be located in dynamic link library VISA32.dll

    I posted this in the hardware forums, but haven't got a respond yet, so I'm trying it here.
    I'm trying to recompile code that was developed
    in LabView 6.0 to LabView8.2.  When I attempt to run the code, I get
    the following error message:
    "The ordinal 215 could not be located in the dynamic link library VISA32.dll".
    This error seems to pop up whenever I make a call to the any of
    the VXI vi.  Currently, we have NI-VXI 3.3.1 and VISA 4.0 installed,
    and we have a MXI-2 PCI card installed in the PC.  The precompiled
    version of the LabVIEW 6.0 code works on the same PC.
    Thanks in advance

    What version of the visa32.dll do you have including the sub version?
    Routines in Dll's are usually referenced either by ordinal position or routine name. This error is implying that
    the routine that was located at ordinal 215 at one time, is not available in the visa32.dll you are using right now at the same ordinal position.
    I looked in my visa32.dll and in my ordinal position 215, I have a routine called, viAssertIntrSignal which would imply some sort of error condition handler.
    My visa32.dll version is 4.0.0.49152. I was curious what sub version you are running since you said you are running v4.0.

  • Ordinal 210 could not be located

    Error message on running snapshot:
    The ordinal 210 could not be located in the dynamic library LOCWIN32.DLL
    Where would this be coming from?

    Sorry - more info:
    Client 4.9 sp 2
    Windows XPPro sp2
    zen 3.2
    I see that there is a newer version of LOCWIN32.DLL in c:\windows\system
    than in my client installer area.
    "Chris Denby" <[email protected]> wrote in message
    news:Gz7be.891$[email protected]..
    > Error message on running snapshot:
    > The ordinal 210 could not be located in the dynamic library LOCWIN32.DLL
    >
    > Where would this be coming from?
    >
    >

  • HT1926 THE PROCEDURE ENTRY POINT QTCF_CFHTTPMESSAGESETHEADERFIELDVALUE could not be located in the dynamic link library QTCF,dll   i keep getting this since i tried to upload the latest itunes ,something got lost while i was installing it cause my electri

    eversince i tried to upgrade my electric turned off and something got lost from my origional itunes now i cant uninstall or reinstall and keep getting the message QTCF_CFHTTPmessagesetheaderfieldvalue could not be located in the dynamic link library QTCF,dll. its driving me nuts can anyone help PLEASE

    Many thanks.
    Origionally i was receiving that some msi or nsi was missing and to insert my itunes disc which ive never had i tried to uninstall and kept on getting could not uninstall due to the folder not being found
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • Firedox did a restart, now it wont open i get the message The procedure point js_UnwrapObjectAndInnerize could not be located in the dynamic link library

    firefox did a restart now it wont open, i get the following message,
    The procedure point js_UnwrapObjectAndInnerize could not be located in the dynamic link library
    have tried system restore but this didnt help

    Do a clean reinstall and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a fresh copy of Firefox.
    *http://kb.mozillazine.org/Installation_directory
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for