The overwrite tab in the source window is not working

I'm following a tutorial and i seem to be doing everything as indicated but my "Overwrite Tab" in my source wind is not working ... any suggestions?

I am guessing you did not source patched your track.

Similar Messages

  • Clicking in the "Finder" window will not work

    Hello everyone! I'm hoping you guys will be able to help me so I won't have to make ANOTHER trip to the Genius Bar.
    Recently I had my trackpad replaced at the Apple Store because I found that it was not registering when I was clicking (however, it would allow me to "tap" on it). I just got my computer back today and I'm happy to say that my trackpad is clicking perfectly...for the most part. It's registering when I click in all the programs, Firefox, Word, etc. HOWEVER, whenever I click on the "Finder" window icon on the bottom of my screen, my clicks aren't working. I can click outside of the box and to other "devices" or "places" in the window, but when I'm trying to click on "documents", "music", "pictures" etc within the "finder" window, it doesn't let me click (even when I change it to "tap" clicking, it won't even open the folders). Does anyone know why this is happening? I'm hoping it's an easy fix so I won't have to go all the way to the Apple Store, however, I'm a teacher and I often use "MY DOCUMENTS" frequently, so me not being able to click on it is quite aggrivating.
    Thanks everyone!

    Stephen,
    Troubleshooting Help Viewer by Dr. Smoke may be "Helpful."
    ;~)

  • Multiple Tabs Warning on CLOSING windows is NOT WORKING, why?

    Firefox used to warn me when multiple tabs where going to be closed (even in private browsing or without remembering history). Now it is closing the WHOLE window with multiple tabs inside. (Of course the option is checked in the preferences). So normally it should work. But it doesn't now. When i click by mistake on the X (close button) of the main window, it closes all the tabs without warning.

    Hi,
    You can try to set '''browser.showQuitWarning''' in [http://kb.mozillazine.org/About:config about:config] to true, and also change '''When Firefox starts''' in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20General%20panel?as=u General] to anything other than '''Show my windows and tabs from last time'''.
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://support.mozilla.org/en-US/kb/Options%20window Options]

  • The url window will not take me to web address when I type it in. Has always worked before, I have not changed any settings.

    Suddenly today, the url window will not work. I checked Internet Explorer and it works fine on that. I type in www.ups.com and hit enter....nothing....what do I do to make this work again?

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • Roll Name in the Source Window

    Is there a way to automatically show all of my roll names in the source window? I would like to be able to just click on a roll name in the source window and be able to see those particular photos in the main iPhoto window.

    Welcome to the Apple Discussions.
    No, Rolls don't get listed in the Source Pane.
    However, there is a way to view just the roll you want. Choose Library from the Source Pane and View > Film Rolls. (The entire library must be selected, with no filter in operation. Be sure all Year Smart Albums are selected - look below Library in the Source Pane. Click the little triangle to reveal or hide them.) Each roll has a disclosure triangle next to its title. Click it to open or close the roll. Option-click one triangle to open or close all rolls in your library. With all rolls closed, it is easy to scroll through the roll list, open one roll, and see just the photos in that roll.
    To make it easier, I title all of my film rolls. Click the little i in the lower left corner to open the Info Pane. When you select a roll's header in the main window you can edit its title, roll date, and comments by typing directly in the Info Pane. Comments are especially handy; they display only when the roll is closed. I use comments to list the contents of a roll, so that I know which roll to open when I want to find a particular photo.
    If you still want your rolls in the Source Pane, you can drag the roll's header there and an Album will be created with the same name and photos. To create Albums that automatically update when you change the photos in the rolls, you would have to create a Smart Album for each roll with the category "Roll contains (type the roll name)". That seems too cumbersome, in my opinion.
    Regards.

  • Can i edit a synched video from plural eyes in the source window first?

    I synched my audio and video files in plural eyes which gave me a synched fill or sequence which is great, but I really want to edit it in the source window before putting it into the Program window. How can I edit it in the source window first?

    You mean trim it? Like grabbing a certain section of the syned clip?
    If so, bring it up on the source monitor, go to your in point and click "I" and then go to your out point and click "O". Then grab the preview image and drag it to your timeline. You can also press "," or "." to bring it down there.

  • Automating folders in the Source Window

    Now that we can finally create folders in the source window I am hoping to create folders by artists without manually typing every one. Is there another way to do it? A script or anything?
    Thanks.

    I agree with MacMuse. The Browse window was designed for just the kind of sorting you want to do.
    I am also afraid that the number of tracks, playlists, and folders you are proposing would slow down iTunes reaction times because of the shear amount of data that it is storing in its flat database. For example, with any playlist or folder highlighted, you can type in the first few letters and iTunes will jump to the playlist or folder that matches what you typed, or the closest match if nothing matches exactly. Already there is a couple second delay in jumping to the matching playlist in iTunes for me, and I have less than 100 playlists and folders. Right now, clicking on a different playlist causes that playlist to open very quickly, but it is not immediate. Already with my almost 100 playlists and folders, if I pay attention, I do notice a slight delay. What would these delays become with the number of folders and playlists you are contemplating?

  • Loading sequences into the source window...

    Hi, does anyone know if I can load a sequence into the source window in Premiere Pro and then be able to type a specific timecode into the window and have the timecode indicator go to that frame of the sequence?  This is easily achievable in Avid and FCP but haven't been able to figure it out in Premiere.

    And once you're on the correct frame in the source monitor, you can match it in the Timeline using the Reverse Match Frame command.
    To use Reverse Match Frame, follow these steps:
    Ensure that you have a clip loaded in the Source monitor.
    In the Source Monitor, place the playhead on the frame that you want to find in the Timeline.
    Select Sequence > Reverse Time Frame, or use the keyboard shortcut Shift+R. Premiere Pro moves the playhead on the Timeline to that exact frame.

  • Imported MOV files are running choppy and I can't edit in the source window..anybody can you walk me thru how to fix?

    My MOV files are choppy in the SOURCE window where I'm trying to edit.  Please help....I have a camera that I use for that is drone footage no audio and it imports fine; never choppy easy to edit.  Now I'm trying to import video from my Lumix; it's bringing in audio that I don't need but the files are choppy and am unable to edit.  Have been watching tutorials but I can't seem to fix the problem still. 

    Thanks for your patience with me.  I have tried what you mentioned and dragging the clips in question to the new item icon.  Sometimes it works fine and others it gets hung up again.  However, I'm used to editing when the file is in the source area (upper left corner ...see file attached...screenshot).  When I do the task you mentioned it immediately puts the entire clip before I edit in the lower right and it doesn't appear i can edit as easily.  Does that make sense?
    I'm starting to think my computer isn't powerful enough?  ):
    Currently the Premier settings are set up like this
    General
    Editing mode: QuickTime DV NTSC
    Timebase: 29.97fps
    Video Settings
    Frame size: 720h 480v (1.2121)
    Frame rate: 29.97 frames/second
    Pixel Aspect Ratio: D1/DV NTSC Widescreen 16:9 (1.2121)
    Fields: Lower Field First
    Audio Settings
    Sample rate: 48000 samples/second
    Default Sequence
    Total video tracks: 3
    Master track type: Stereo
    Audio Tracks:
    Audio 1: Standard
    Audio 2: Standard
    Audio 3: Standard

  • Program window is slightly zoomed in versus the source window

    Hello, I've used final cut for years and have switched over to premiere, I have cs5.5.  My question is:  I have imported the .mov file and viewed it in the source window, it looks great, when I put that into the timeline, double click it into the program window, the entire image is zoomed in a little, cutting off parts of the edges and the top and bottom, I exported the file thinking it would revert back to the original, but it's still zoomed in.  Is there settings that can match the source to the program?  What am I doing?  Thanks so much, Newbie

    Well, the Source Monitor shows the file, in a player, from the HDD. The Program Monitor shows the Timeline, and the Clips on it, for editing. They are different.
    Good luck,
    Hunt

  • Could not be saved because the source file could not be read.

    I tried to download and after a while, this error message: ''[filename] could not be saved because the source file could not be read.'' I've been on google searching but I could not find the answer can someone PLEASE help me. it happened when downloading a game and I've already seen a few times before but it was less important.
    sorry for the bad english I used a translator.

    This problem isn't only happening with Firefox 4, for windows, as the System Details, and Tags indicate.
    I'm using a Mac laptop (OS X 10.5.8 -- Leopard), using Firefox 6, and have been having this problem with large files for quite a while ... possibly since FF 4, but definitely with FF 5. The large files I've had the problem with are in the 500 - 900 MB range, and from commercial sites as well as most recently with a zip file containing photos from a friend which he uploaded to dl.dropbox.com ... attempted it numerous times, after trying the various suggested "fixes", and each time at around 255 MB, the download quits, with the error that file cannot be read from the server.
    The various proposed solutions I've found on the web -- resetting the user configured options connected to downloads in FF config (about:config); deleting the compreg.dat file in the FF profile folder, don't pause the download (never have done this) etc.
    Others have opined that the problem is flaky intermittent WiFi, or Security/Anti Virus software interfering with FF's accessibility to the file during the download; or a caching problem at one's ISP -- HOWEVER Safari doesn't experience this problem at all. Each time that I've experienced it in FF, I launch Safari, and can download the file completely without any errors.
    Would really like to see someone from Mozilla respond to this ... lots of us are experiencing it.
    Whatever happened to Netscape's ability to recover from download interruptions and resume a download at the point where it had been interrupted (like when a dial up modem dropped the line in the middle of the download) -- sure would be useful to see that feature come back in FF.
    Thanks,
    Muiz

  • ITunesSetup.exe.part could not be saved, because the source file could not be read.

    I keep getting this error message when I try to download itunes.  I have windows vista.  please help? 
    iTunesSetup.exe.part could not be saved, because the source file could not be read.  Try again later, or contact the server administrator.

    Hi,
    Please Uninstall Lightroom 4.1 and then download the latest version to install. It should work.
    Regards,
    Abhijit

  • Source not found: The source attachment does not contain the source........

    Source not found: The source attachment does not contain the source for the file ClassLoader.Class
    Hey,
    I'm running eclipse Version: 3.2.2 Build id: M20070212-1330, on a Vista Home Premium Toshiba laptop. Everything was working fine before i installed the Java JDK 5 and JDK 6. Now all of sudden when i try to run one my programs that worked in the past i get the following error:
    java.lang.UnsupportedClassVersionError: Bad version number in .class file
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Exception in thread "main"
    I'm not sure where to go from here...I've looked up a few articles that mention going into some system.ini files...etc... to make sure the variable are ok but i feel like i'm getting in over my head.
    Thanks in advance for your thoughts,
    Struggling to Run

    Ok...after I thought everything was going well enough.... problems are arising.
    Here's where I'm at and that will include how i got a "nano" error. After a lot of late night messing around I ended up installing a few important component that seem to have done some good. Firstly i installed j2sdk-1_4_2_18-windows-i586-p and ended up with a few good things. Windows was happy when i changed the path variables in the environment setting to point to the newly created c:\program files\java\j2re1.4.2_18\bin folder. This allowed me to start up eclipse properly and use some functions in CMD. In CMD when i use the command java -version it reads Java version 1_.4_.2_1_8. Next i installed the j2sdk-1_4_2_13 jre 1.6.0 environment and ended up with a new folder in C:\Program Files\Java\jre1.6.0 as well.
    with the two environments installed i thought i was ready fro the next step.
    I got started on eclipse and now that it was opening i was feeling good. Next i opened window --> preferences --> java --> installed jre's and i started adding things like crazy. My current list of comprised of many things which I'm certain should all be there at this point so I'll list them:
    j2sdk1.4.2_13 - C:\j2sdk1.4.2_13
    j2re1.4.2_18 - C:\Program Files\Java\j2re1.4.2_18
    j2sdk1.4.2_18 - C:\j2sdk1.4.2_18\jre
    j2sdk1.6.0 - C:\Program Files\Java\jre1.6.0
    jdk1.6.0 - C:\Program Files\Java\jdk1.6.0
    I've set the preferred jre to be set to jdk1.6.0 - C:\Program Files\Java\jdk1.6.0 and it seems to work for all of my programs that do not have the input.scanner. However for the projects that do have this method i get a few different errors:
    1___________
    java.lang.NoClassDefFoundError: couponCounter/CouponCounter
    Exception in thread "main"
    2__________
    Exception in thread "main" java.lang.Error: Unresolved compilation problem:
         Syntax error, insert "}" to complete ClassBody
         at BensCalculator.main(BensCalculator.java:112)
    Now i feel like the second error is lying to me because i know that bit of code is written properly.... i believe it is related to a problem not locating the proper classes.
    Anyhow I'm still pushing along but some help at this point would be much appreciated. It's very weird some things with the scanner are working now..... I don't know I'm not totally convinced yet everything is OK.
    Thank you

  • The source drive does not contain the HP Recovery Image

    I'm trying to create a bootable USB stick with the Recovery disk creation utility of HP. After having moaned that my 8560w was running on battery, and that there was no room on a 16 GB FAT32 formated USB stick, I finally came to the next screen that says "The source drive does not contain the HP Recovery Image" which is wrong: partition D is primary, contains the recovery disk. So what ? No way to create a recovery disk ? Note also that I have no Recovery Manager (???) and that F11 has never worked (??????). HP decision to get out of the PC business is probably the best thing that could happen to customers.
    pher
    This question was solved.
    View Solution.

    Hi,
    Check the below link:
    Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)
    Quote from this document:
    "Use a blank USB flash drive with at least 32 GB of memory. HP recommends using a name brand from a manufacturer you trust."
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Maybe you are looking for