The passive node should not be shared by any other SQL instance.

Dears,
the customer has SQL cluster with multiple instance for many technology. Can I install new instance to host Lync backend database or not ???
I found in the below URL
"SQL Clustering support is for an active/passive configuration. For performance reasons, the passive node should not be shared by any other SQL instance."
I want to understand Why Lync 2013 the backend SQL passive node should not be shared by any other SQL instance. whish is mean that I can not install SQL new instance to host LYNC backend on the current my SQL cluster which is work with multiple instance
http://technet.microsoft.com/en-us/library/gg398990.aspx
Amr Nassar

Hi Amr,
Yes you can install a new instance on your cluster to host the Lync back end database. I believe the statement about not sharing the passive node with any other SQL instance refers to a SQL instance outside of the A/P cluster. (Basically the passive node
should be purely that and able to handle the load in the event it becomes the active node without anything else hindering it)
Providing your SQL cluster is able to handle the load Lync places on it along with everything else you should not have any issues.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)

Similar Messages

HT1212 When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

No. You need a computer with iTunes and an internet connection.
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

SQL SERVER Failover Cluster switch failure because the passive node automatically reassign drive letter

I switch the sql server resource group to the standby node , when the disk resource ready bring online in the passive node ,then occur exception. because the original dependency disk resource the drive letter is 'K:' , BUT when the disk bring online , it
automatically reassign new drive letter 'H:' , So the sql server resource couldnot bring online . And After Manual modify the drive letter to 'K:' in the passive node , It Works ! So my question is why it not use the original drive letter
and reassign a new one . what reasons would be cause it ? mount point ? Some log as follows:
00001cbc.000004e0::2015/03/12-14:41:11.377 WARN [RES] Physical Disk <FltLowestPrice_K>: OnlineThread: Failed to set volguid \??\Volume{e32c13d5-02e6-4924-a2d9-59a6fae1a1be}. Error: 183.
00001cbc.000004e0::2015/03/12-14:41:11.377 INFO [RES] Physical Disk <FltLowestPrice_K>: Found 2 mount points for device \Device\Harddisk8\Partition2
00001cbc.00001cdc::2015/03/12-14:41:11.377 INFO [RES] Physical Disk: PNP: Update volume exit, status 1168
00001cbc.00001cdc::2015/03/12-14:41:11.377 INFO [RES] Physical Disk: PNP: Updating volume
\\?\STORAGE#Volume#{1a8ddb8e-fe43-11e2-b7c5-6c3be5a5cdca}#0000000008100000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
00001cbc.00001cdc::2015/03/12-14:41:11.377 INFO [RES] Physical Disk: PNP: Update volume exit, status 5023
00001cbc.000004e0::2015/03/12-14:41:11.377 ERR [RES] Physical Disk: Failed to get volname for drive H:\, status 2
00001cbc.000004e0::2015/03/12-14:41:11.377 INFO [RES] Physical Disk <FltLowestPrice_K>: VolumeIsNtfs: Volume
\\?\GLOBALROOT\Device\Harddisk8\Partition2\ has FS type NTFS
00001cbc.000004e0::2015/03/12-14:41:11.377 INFO [RES] Physical Disk: Volume
\\?\GLOBALROOT\Device\Harddisk8\Partition2\ has FS type NTFS
00001cbc.000004e0::2015/03/12-14:41:11.377 INFO [RES] Physical Disk: MountPoint H:\ points to volume
\\?\Volume{e32c13d5-02e6-4924-a2d9-59a6fae1a1be}\

Sounds like you have an cluster hive that is out of date/bad, or some registry settings which are incorrect. You'll want to have this question transferred to the windows forum as that's really what you're asking about.
-Sean
The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

You can prevent it from being printed by applying a security policy to it
in Acrobat. The rest can't be prevented, unless you spend a LOT of money
on DRM protection.

E-Rec Reference Code in the Publication tab should not appear after enddate

hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RK

Hi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman

The delivery date should not flow from PR to PO.

Dear Gurus,
While creating a P.O with reference to PR.
The delivery date should not flow from PR to PO.
Any settings are there for this

there is no planning.
this is a utilites industry.
if there is any way to do.The delivery date should not flow from PR to PO.
please share ur ideas

Message: the specified nodes are not clusterable

Hi,
I am geting message "the specified nodes are not clusterable" at the time of crs installation on solaris 10.
i have already configure ssh and configure properelly.
please suggest.
thanks
Anup

Hello IndiaDBA,
The id on OS groups and users are the same on all nodes?
Check Metalink note ID 338045.1
Error:*** Alert: The specified nodes are not clusterable. This could be due to one or more of the following reasons:
1. The user performing the install is not configured in an equivalent manner on all nodes.
2. ssh and scp are not configured properly on all nodes.
3. rsh and rcp are not configured properly on all nodes.
Do a simple test before proceed the installation
# Public
$ ssh node1 date
$ ssh node2 date
$ ssh nodeN date
# Priv
$ ssh node1-priv date
$ ssh node2-priv date
$ ssh nodeN-priv date
# Vip
$ ssh node1-vip date
$ ssh node2-vip date
$ ssh nodeN-vip date
Check Metalink note ID 300548.1 How To Configure SSH for a RAC Installation
Regards,
Rodrigo Mufalani
http://www.mrdba.com.br/mufalani

The specified nodes are not clusterable

Hello,
I am trying to install RAC 10g,during the installation , i got error saying the specific nodes are not clusterable, i have checked below things on both nodes, node reachablity and node connectivity are successful.
ssh rac1 date
ssh rac1-priv date
ssh rac2 date
ssh rac2-priv date
Could you please help me, how to resolve this issue.
Thanks
Nitya
Edited by: user8773474 on Aug 28, 2009 8:32 AM

Hello Andy,
I searched the link to reward you, but i couldn't
Really thanks for you quick response,
Right now i can say helpful, i will download and try ,if it is working , then i will update you as correct.
Best Regards
Nitya

The ios 7 does not play Shared video

the ios 7 does not play Shared video why?

I have the same problem. Shared video not accessible after iOS 7 upgrade. Apple please address this.

How do I remove my credit card from my account and still download free apps. Bc that card is no more good anymore the App Store will not let me download any apps . I no longer have a credit or debit card.so PLS help

How do I remove my credit card from my account and still download free apps? because that card is no more good anymore the App Store will not let me download any apps . I no longer have a credit or debit card.so PLS help

On your iPad tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should give you a payments link on your account's page. Or on your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should also be a payment link.
Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID)
If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information?

"the directory E: could not be created." any help?

Upon initial start up (after effects CC) an error sign appears saying
"the directory E: could not be created."
any help?

We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
Where did you install After Effects? It should be in the default application installation location for your operating system.

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is off

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is turned off.. Any ideas?

Thanks Rudegar,
I only synch and do not stream off of my 1st Gen AppleTV
I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
Will keep working on other fix options (factory reset, etc.)
Thanks again

The passive node should not be shared by any other SQL instance.

Similar Messages

Maybe you are looking for