The power cord to my hp photosmart plus printer b209a does not work. what can i do?

The warranty for my computer's printer is up, but the printer has not turned on for quite a while. After going through the HP troubleshooting - nothing seems to work. When the power cord is plugged in, the green indicator light does not light up and the printer will not turn on at all.

Here's the steps to follow if your printer isn't turning on.
If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer.
I am an HP employee.

Similar Messages

I need to verify my apple ID sent to me by e-mail however the link does not work.What can I do?

hi!
I need to verify my apple ID sent to me by e-mail however the link does not work.What can I do?

Hi,
See this Link on Apple ID:
http://support.apple.com/kb/HE37
Go to the Very Last Section "How do I verify my Apple ID by email?
Cheers,

I have installed the latest version of Adobe flash player and it still does not work what did i do

I have installed the latest version of Adobe flash player and it still is not working and every time I enable shockwave the internet does not respond

Clear your cache Tools > Options > Advanced > Network > clear now
Right-click on video > Settings > turn off Hardware Acceleration

I worked for a company that closed down and inherited an ipad 2 linked to Vodafone uk as the carrier but no account details. So I factory reset, downloaded the ios7and added EE sim and Ipad does not work. what can I do? Voda/EE/Apple say NO SOLUTION?

I inherited an Ipad 2 from a company that I had worked for in the UK but had closed down.
It was an IPAD2 locked to the Vodafone UK network by a Vodafone SIM Card.
No account details were or are available for the original account.
So I removed the Vodafone SIM Card and then factory reset wirelessly using my wireless at home.
I updated the system to IOS 7.0.2.
I was then sold under a contract from EE another UK carrier a SIM card for the Ipad and when inserted the Ipad says Sim not applicable.
I checked with Vodafone and EE shop and they said they cant unlock it, I checked with Apple who said the same!
So I have an IPad I can use wirelessly at home, a sim card from EE which is an u
locked Vodafone carrier mode and all 3 multinational companies say they cannot unlock it from Vodafone to enable me to use the EE sim.
What can I do to sort this mess out? Please help!
Thank You

Steve, have you tried just going through the unlock form here?
http://www.vodafone.co.uk/vodafone-uk/forms/unlock-code-request/
That's what the moderator in several older threads in Vodaphone's forum said was all that is necessary. Carriers often won't unlock for anyone but the original account holder, so if you don't have the details of the company's account, that might be the barrier in which case there will not be any way to get the iPad officially unlocked.
Good luck.

I love new updates; I read the information, but missed that Dashland, as with last update, does not work. Can't live without it. I've updated. Now, what to do?

Last update clearly informed me that Dashlane did not work with the update. I read the information this morning before downloading and did not see that once again, Dashlane will not work. I must have access to my passwords. Do I have any recourse other than re-installing the last version of Firefox? Or, using Safari in the interim so I can use iCloud to reveal passwords?

See this Dashlane support page - http://support.dashlane.com/customer/portal/articles/390903

I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

You can't activate any GSM iPhone without a valid sim card installed in the phone.
So, yes, you need to get a sim card.

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?

A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?

The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose.

SQL*Plus COPY command does not work

SQL*Plus COPY command does not work in SQL Developer. I am using SQL Developer 1.5.1 on Windows XP.
copy from <source_db_connection> to <target_db_connection> create <target_tab_name> using select * from <source_tab_name>
Does it work on different versions of SQL Developer ?
Anyone had any success in trying COPY command in SQL Developer?
Thanks in advance.

While it hasn't been updated for v1.5, this page lists the supported SQL*Plus commands. COPY is explicitly listed as not supported.
theFurryOne

The giant seach bar in the center of the home page does not work, what is this for? also under it is a bar with no title?

there is a search bar in the middle of the home page, I tried using it and it does not work. what is this for?

Battery does not appear to charge
Important: iPod touch cannot be charged with a FireWire-based power source.
Verify that the power source being used is working properly.
If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
Try another USB port.
Try charging from a USB charger if available.
If that does not help, try another USB cable if available.
Learn more about charging the battery.
The Home button isn't working
Put the iPod Touch to sleep.
Wait a couple of seconds.
Press the Home button.
iPod Touch should wake up.
If iPod Touch does not wake up, then iPod Touch should be serviced.
Resources for Service
http://support.apple.com/kb/he57
https://selfsolve.apple.com

TS2771 i am trying to fix my ipod touch tryed password to many times the problem is my usb port on my computer does not work what else can i try?

my sons ipod is disabled from trying password to many times my usb port on my computer does not work. what else can i do to get this disabled off my sons ipod please help!!!

The only thing you can do is place the iPod in Recovery mode and restore via iTunes on a computer. It is a good security feature.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account

Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account in order to access Icloud?

If you want to change your iCloud ID or password on your phone go to Settings>iCloud and tap Delete Account, then sign back in with your updated information. Note: this only deletes the account and any synced data from your phone, not from iCloud. Provided you are signing back into the same account and not changing accounts it will be synced back to your device when you sign back in.

The power cord to my hp photosmart plus printer b209a does not work. what can i do?

Similar Messages

Maybe you are looking for