The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.
If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost
Similar Messages
-
how do i get the ios 10.9 so i can put it back on the new hard drive
If the Mac mini shipped with 10.6.8 or earlier, install Mac OS X 10.6, update it to 10.6.8, open the Mac App Store, and download 10.9.
If the Mac mini shipped with 10.7 or newer, connect it to the Internet, restart it with the Command and R keys held down, and install an OS. If this isn't 10.9, open the Mac App Store and download it from there.
(98457) -
All Mac Minis in my household cannot sleep and cannot shutdown wo rebooting
Hi everyone, I am hoping for community help here with a very annoying issue. Since upgrading to Snow Leopard 10.6.6 two Mac Minis in my household in Australia (and one 30,000 km away in Germany) refuse to go to sleep (instantly waking up) AND refusing to shut down, instantly rebooting.
They span 3 generations of Mac Mini (2011 = brand new, 2009, 2007) and all have the same problem. Some have no peripherals connected, others have plenty. I've already cleaned out all login items and any other unix daemons/schedulers that I thought should not be running from ancient apps that are no longer on these machines.
This only happened in 10.6.6 - my Macbook Pro is completely unaffected by this weird bug.
Many thanks for your help, cheers KlausHmm, looks like I've solved the sleep problem. Paradoxically, ACTIVATING the "wake for network access" option in Energy Saver actually makes all my sleep functions (both timed and manually activated) work like a charm again go figure, at least on one of my machines (now trying it on the others)... still haven't solved the automatic reboot problem though....
-
Moving photos from mac mini to macbook...AH!
So I want to move all my twos years worth of photos from my mac mini to my macbook. I tried just putting the actual folders for 05' and 06' from my mac mini onto an external hard drive and then dragging then into iPhoto on my macbook, but it didn't organize them well at all. There doubles of some of the photos and some of them are way out of place. Is there a better way I can transfer these fills and keep them organized?
Bananaeatsmonkey:
All you need to do is copy the entire iPhoto Library folder to the Macbook and place it in the Pictures folder unless you have a library there with additional photos in it. If no then a simple replacement is all you need to do. When you open iPhoto it will open that library.
Note: Just to be sure all permissions/ownership are correct on the copied folder download and run BatChmod on it as follows before opening for the first time:
download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administartive name in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar -
I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder “Music” can’t be opened because you don’t have permission to see its contents". Why cant i access the files from my old mac? I tried the time machine and that isnt working either. I have files that I need to use on my new mac, all my old programs and such. I thought they said it was easy to get your files from one mac to another. Please help.
Your account names are probably different on the two Macs. If you know the UNIX command line, open a terminal window and run:
$ id
You should see a line that starts with something like this:
uid=501(your_user_id_here)
now check the owner of the folder you copied over:
$ ls -ld Music
drwx------+ 8 some_user_id_here staff 272 May 14 16:08 Music
Do the IDs match? If not, you could change the ownership. Say your id is "johnsmith"
$ chown -R johnsmith Music
Now try and access it with iTunes. -
The "+" appears on the left side of the open tabs, when I re-open a closed window. The tab that should be first on the left when the window is re-opened doesn't have a tab! If all the other tabs are closed, the webpage appears, but still has no tab! If more tabs are then opened, it is again inaccessible without closing all tabs!
In Finder, go command - F. On the top left set "Kind" to Date Created, finish selecting the criteria and hot "Save" on the top right. You'll get a new smart folder with an option to add it to the sidebar.
-
I started Boot Camp on a MAC mini but then had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk How can I recover?
Welcome to the Apple Support Communities
That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual -
Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting the three beeps?
If you can't eject a CD or DVD or open the drive tray
How do I eject a defective DVD?: Apple Support Communities
How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
From:
Mac computers: About startup tones
3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data intregrity check.
1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode. -
Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.
Hey jamesarm97 & diegofoto,
On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks,
Matt M. -
I paid $20 for Keynote for my MAC mini. I made a presentation and now I want to send it to my iPad. Do I have to buy an iPad version of Keynote to be able to play the presentation on the iPad.
evelyn fromfrankland river wrote:
... have to buy an iPad version of Keynote to be able to play the presentation on the iPad.
Yes... -
I have an apple wired keyboard hooked up to my Mac mini. A while ago, the keyboard stopped working. I tried re plugging it in, and nothing's working. The "Bluetooth settings" keeps popping up, but I don't have Bluetooth, it's wired. Please help!
System Preferences->BlueTooth and turn it off. Restart and see if that fixes the problem.
-
Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini
There is no license required for iWeb. Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
How can I transfer Elements 10 from my Mac Mini to my new iMac?
Hi all!
I recently purchased Elements 10 and installed it on my Mac Mini only because my old iMac was dying. I now have a new iMac and I would like to have Elements 10 on the iMac and remove it from my Mac Mini. I want to do this because the Mac Mini is used as a music server. The iMac desktop is my main computer and is a much better place to have Elements 10.
Can I do this? What do I need to do?
Thanks in advance!
DaveOn the mini, go to Editor>Help Deactivate. Then install PSE on the imac. You can actually have it on two computers, but if you don't want it on the mini anymore you might as well free up that activation for future use.
Don't try to copy PSE to the new computer. It installs stuff in many places, not just the applications folder, unless you have the app store version, in which case you would just go to app store>purchases on the imac to add it there. The app store version can be installed on all the macs that use the same app store/itunes ID, no matter how many that may be, -
I just purchased Apple USB SuperDrive and connected to my Mac mini late 2012 USB slot but nothing shows up on the screen.
I have OS X versus 10.10.3The system bus and all connected products should appear in the system profile or in the
hardware part of About this Mac (more info) and if that does not, restart the computer with
the external Apple USB SuperDrive plugged in. •As a last resort, if nothing else, before a
return trip to be rid of the SuperDrive, you could try a system management controller reset.
The SMC reset is not a first choice, so I won't post a link to the support instruction page.
A new Apple USB SuperDrive should be seen as hardware in system information report.
Of course, an icon of disc media should appear once the disc is inserted into the drive, too.
Good luck & happy computing!
Maybe you are looking for
-
How to set input/output "use" attribute in the WSDL file of BPEL process?
Hello, I have a BPEL process that I want to deploy it as an RPC web service. I want to access it from a Java module (via an automatic generated Java stub from the WSDL file exposed by the BPEL process). I wrote manually the corresponding WSDL file fo
-
Hello All The 6720 is listed on the specs page of Nokia.com as having the TV-Out facillity. The CA75u TV Out cable is a recommended option. This is one of the reasons I chose it as a gift. Can anybody with a 6720 tell me if they have used this func
-
No S.M.A.R.T. support on X79A-GD65?
Hello, I can not find any informations about enabling SMART on the X79A-GD65 mainboard. I can not use monitoring for SSD drive if I don't enable it. Thanks
-
I've got a document with multiple scenes, and in the 2nd scene I have a dynamic text, multi-line field with a scroll bar that works just fine. However, when I try the same thing in other scenes the roller bar doesn't have arrows and the text is no lo
-
If I comment the first line and uncomment the second the script runs as expected, or when it's run for one individual contact. But when it's run against the entire OU it fails and returns the error at the bottom of the posting. Any ideas? $MC = get