The recording device reported the media error: Unknown device error. (0x0C,

Hello
I have a problem making a DUAL LAYER DVD, i have done anothers before. But now I can't burn it.
It's a message error.
(The recording device reported the media error: Unknown device error. (0x0C, 0x00.))
Next this my Mac configuration.
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 6 GB
I have DVD STUDIO PRO 4.2.1, and in the log appears this:
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 6 PGCs in VTSM1
Created 8 PGCs in VMG.
0 Menu(s) will be created...
Compiling Menu PGCs...
Writing VTS010.VOB
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Writing VTS010.VOB
Muxing VTS011.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘UNTITLED_DISC.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 2
Doing opposite track path
Setting layer switch at sector 2053488.
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x0C, 0x00.)
What should be the problem?

There could be a few reasons, a common one is bad DVDs or a burner going bad.
[Some threads discussing the error|http://discussions.apple.com/search.jspa?threadID=&q=Therecording+device+reported+the+media+error%3A+Unknown+device+error.+(0x0C%2C0x00.)&objID=f952&dateRange=all&userID=&numResults=15]
You can try the [arrpoach in this thread|http://discussions.apple.com/thread.jspa?messageID=2453295&#2453295] as s start.
Take a look at this
Not sure which brand of DVDs you are using, but [this guide rates brands|http://www.digitalfaq.com/reviews/dvd-media.htm]
Verbatim are usually good for me for DL.

Similar Messages

  • The recording device reported the illegal request: Unknown device

    Has anybody any idea? I am not able to output a dvd-9 (dvd + dl). there is always the message: the recording device reported the illegal request: unknown device. The layersize is ok and the dual layer brake is set.

    I don't have the exact error message with me, but that sounds similar. I bought a new DVR-115 for my Mac Pro and put the existing DVR-112 in the bottom slot. The DVR-115 worked fine for a month or so, then started getting that or a similar error. I replaced it under warranty and soon got the same thing. Then I Googled the error message an found many people having the same problem, even people with PCs. Now I just burn with the DVR-112, not worth resolving. BUT, I could be remembering the error message incorrectly, so Google and see what you get.

  • I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 profession​al. The create new report VI opens Excel but throws error (-21471672​62- from automation open VI) when I try to open MS word. please help...

    I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

    Hi Leo22,
    Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
    Jeremy L.
    National Instruments
    Jeremy L.
    National Instruments

  • Error occurred. Contact the administrator and report the exception ID

    Dear All,
    We are on EP 7 SP8. We just now performed a system copy and are right now done with the post installation activities. All seems fine but we are having a problem in the Navigation Windown Quick Create link on the left hand side. Here I am always getting an error: Error occurred. Contact the administrator and report the exception ID in the log: 001A4B066A940068000001B500002946000433EB006CFEAC
    Can someone please guide me with how to remove this error.
    Please let me know as we are stuck and need to give the system to the client.
    Thanks a lot in advance.
    Best Regards,
    Rajeet

    Hello
    Can you see the defaulttrace file for more details?
    Open up Visual Administrator and go to Log Viewer.  Then open up the Defaulttrace file. Generate the same error message and look in the file for more details.
    What do you see?
    And of course.. What did you do to make this error ?
    Best Regards
    Kristoffer Engh

  • IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

    I am using the generation 1 IPAD.
    I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
    I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
    I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
    Thanks,
    Vinay

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • DVD Burning Error: Unknown device error. (0x73, 0x03.)

    I have been trying to burn a home movie using iDVD. I transferred the media successfully to my computer, followed all the steps, and was finally ready to burn the DVD. After waiting almost an hour through the burn process, it spit the DVD back out of my Macbook Pro and gave me the following message.
    *Errors were found during the burning process:*
    *The recording device reported the media error: Unknown device error. (0x73, 0x03.)*
    I don't really know what this means. Was the media corrupt? Or is there a problem with my DVD player? I have supplied my DVD and computer information below. I would appreciate all the help I can get. Thank you in advance!
    Courtney
    *MATSHITA DVD-R UJ-857D:*
    Firmware Revision: KCVB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    *Hardware Overview:*
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B07
    SMC Version (system): 1.12f5

    Using the same media I've used for years (Verbatim 4x InkJet printable) and all of a sudden can't burn from the internal drive. I do have an external burner (7 disc standalone replicator with USB/FireWire 400) and hooked that up and burned to a disc from the same spindle with no problem, and then made a 3x replicate with the same media. So it's looking like my MacBook Pro's drive is failing?
    Laptop is plugged in and fully charged.
    DVD Studio Pro: Burn started, Fri Oct 23 22:42:55 2009
    DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
    DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
    DVD Studio Pro: Burn underrun protection is supported, and enabled.
    DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn failed, Fri Oct 23 22:44:13 2009
    DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
    DVD Studio Pro: Burn started, Fri Oct 23 22:55:50 2009
    DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
    DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
    DVD Studio Pro: Burn underrun protection is supported, and enabled.
    DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn failed, Fri Oct 23 22:57:08 2009
    DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.

  • Hardware error: unknown device

    I'm getting the following error when I format my DVD in DVDStudioPro:
    The recording device reported the hardware error: unknown device 0x03, 0x00.
    Has anyone seen this error before?
    I tried recreating my project, making a DVD from an old project that I know works, trashing my preferences... I'm using Verbatim DVD+R which are meant to be high quality.
    Any advice would be much appreciated!
    Thanks,
    Pam

    -R works! Strange though, my burner says it can burn +R and -R DVDs. And I have burnt Maxell DVD+Rs with no problem before, maybe it's just the Verbatim +Rs it doesn't like...
    thanks

  • How can I reduce the recording time of the webcam?

    How can I reduce the recording time of the webcam?
    thanks
    Alex

    Keep in mind that Logic also has a limit of 8550 quarter notes. So changing the time signature to 4/8 can get longer recording times. So make sure you change this setting along with the song end. See page 93 in the reference manual.
    MBP 1.83 & MDD 1G DP   Mac OS X (10.4.7)   Logic Pro 7.2.2, Motu 828MkII+828, Firebox LC&XT, Tranzport, Unitor8+(3x)AMT-8's

  • Delete the records which have the Data values are NULL before load data to BPC model

    Hi Everyone,
    I am loading the data from flat file to BPC Model (10.0 Version).
    Source data (Flat file) looks like below:
    RP_Employee RPT_Currency Data
    Test                USD                   8
    Test1              USD
    Test2              USD                    6
    My user requirement is that to delete the records which have the Data values are NULL before load data to BPC model.
    So,Please let me know how can i meet to this requirement.
    I am thinking that,it is possible by using start routine BADi. If i am correct please let me know process like creation of class and BADi implementation.
    Thanks in advance!!

    Hi Nilanjan,
    Please see my source data below:
    Account      Client       Employee     Time                Data
    123              XYZ            Vishu            2014.01               300
    456                                                       2014.01
    789              ABC         Alexander      2014.02               200
    If you see the second record,
    If data value is ZULL,  then the Employee or another dimension is also NULL.
    So I want to delete second records.
    If it is Start routine please share the code and steps to do.
    Thanks in advance!!
    Regards,
    Viswanath

  • I'm having trouble recording a bass to go along with a recording I dropped into GB.  I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record.  What am I missing?

    I have the bass connected to my imac with an interface.
    I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
    Am I missing something ?
    Please advise.
    Mike

    Double check all your audio settings. 
    System Preferences --> Sound --> Input should be set to your audio interface.
    GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
    With your track selected, open the Track Info pane, and select the Edit tab.  Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

  • I want to be able to tweak the graphic equalizer in real time while recording - and have this have the audible effect written to the recording.   At the moment i have to go into post-production and manually set the graph equalizer at various time points .

    i want to be able to tweak the graphic equalizer in real time while recording - and have this have the audible effect written to the recording.
    At the moment i have to go into post-production and manually set the graph equalizer at various time points ...

    This won't be real-time as you record, but you could tweak the EQ in real-time after the recording thus:
    Record what you want to tweak into GB with no effects.
    Solo the track and output it into something like Audacity.
    Start Audacity recording, then play your track in GB as you make those tweaks. That's what Audacity will record.
    Get that file from Audacity and put it into GB, then you'll have that effect.
    Sorry if it's complicated, but that's what came to mind. Hope it works.

  • How to display all the Records of all the "Books of Business" in Report ?

    Hello,
    I have a user with 3 "Books of Business" (No Sub Books).
    I would like to generate a report with the data of the 3 books.
    With the "selector", it seems that I can't choose the "All" option.
    Can someone confirm the behavior ?
    Thanks for your help.

    Hello,
    I do have a similar problem.
    I have already tried to create a parent book (the checkbox "can contain data" is not activated), assign it to sub-books and add first my user as a book user (Admin role). However, when I start a simple report which should show e.g. Number of Contacts in a book an choose the parent book in the book selector I get an error message and there are no results ("The specified criteria didn't result in any data").
    Did I miss any setup steps or is not possible to see all the records at once which belong to the sub-books with a parent book?
    If I pick my user book, I see only the records I own. The problem is that our CEO needs a view there he could see records in sub-books separately but also the records in both of them at once. Unfortunately, the Manager Visibility can not be applied because we have a different hierarchy in the system as it is in real (otherwise wrong data in forecasts).
    Many thanks in advance
    Regards, Vilma

  • PS CS5 Save for Web and Devices reports "The operation could not be completed"  ?

    I teach in a lab of 27 computers, 110 students and part of the curriculum is teaching students to "Save for Web and Devices" this year for some strange reason none of my students can access "Save for Web and Devices"  they get the error message "The operation could not be completed-A write permissions error has occured."
    It has stumped our district top network support guru.
    We are running PS CS5 12.0.4
    He tried this posted fix but it did not work
    http://involution.com/2010/06/13/adobe-photoshop-cs5-write-perimissions-error-on-snow-leop ard/
    It worked once last Friday but today it failed, I'm getting very nervous about being able to prepare my students for the ACA exam without this function.
    In a discussion forum they suggested "zipping and deleting" the save for web preferences, I tried that.  Shut down Photoshop reopened it and that did not work.
    I am at a loss.  Seems like a bug.
    Any ideas.
    We are using iMacs running  Mac OS X  10.5.8

    The error message may not simply address the location to where the students will save a single file. The error likely applies to the temporary location where the various optimized versions might be automatically saved as you preview the image as JPG/PNG/GIF. I would wager that you would not see this error when you are logged into one of the students' computers as an admin.

  • My phone is unresponsive, like a black screen, except bright colors streak the screen. I tried plugging it into the computer but it says its an unknown device. What happened?

    I recently plugged in my phone to the computer to download some music. It was resyncing and copying an app, while simultaneously I was on snapchat when suddenly a big wave of pink covered the bottom of the screen, then streaks of bright colors covered the whole screen. I cant turn it off because I use assistive touch, which is now covered by the streaks. Right now I'm waiting for my phone to turn off by itself, hopefully, because it was low battery when I plugged it in. Not only that, but when I plug it into the computer it says the device and port are 'unknown'. What happened? Is my phone broken? Please help me.

    See if you can connect in recovery mode and restore your device, explained in this article:
    iOS: Unable to update or restore
    If you can't, you should get it serviced.
    Apple - Support - Service Answer Center

  • USB Storage Devices report "no media"

    Lately, I've been having a problem with USB memory sticks on my HP laptop running Windows 7 x64.  I've tried a SanDisk Cruzer and a Staples Relay  In each case, when the device is plugged in, it soon appears in Device Manager both under "Disk
    drives" with their respective brand names and under "Universal Serial Bus controllers" as a generic "USB Mass Storage Device".  After a delay, it appears with a drive letter assignment in "My Computer" and is visible
    in "Disk Management".
    However, normally the USB device blinks for a short time and then glows steadily.  In this case, it continued to blink.  
    Furthermore, when the drive letter (H: in this case, because I have two HDD partitions and the DVD/CD device shows as E, F, and G) is opened in Explorer, it shows as empty.  Clicking on New Folder produces the message, "device not available, please
    insert media and try again".  Disk Management reports, "no media".
    After examining various posts, I took the advice of Uninstalling the device from Device Manager (both the branded listing under Disk drives and the generic Mass Storage Device under USB Controllers, and then letting Windows reinstall the drivers.  Within
    a minute or so, the device was working!  Great.
    But then, when I switched to the other USB device, the original problem reappeared.  Again, uninstalling the devices from Device Manager worked.
    But, I obviously don't want to have to uninstall the device every time I wish to use a memory stick.  Any solution?

    Hi
    Maybe try to update your chipset, sm bus controller and update your windows as well
    For update chipset and sm bus controller you can find it at HP website or your chipset manufactured

Maybe you are looking for