The Regular Expression anchors, "^" and "$" do not work for me in Dreamweaver

I am using the Find and Replace feature of Dreamweaver 8 and especially the "Use Regular Expressions" setting. But I have never been able to make the Regular Expression anchors "^" and "$" work at all. This are supposed to fix a match at the beginning or ending of a line or input. But if I search even something as elementary as "^ ", or " $", it can't seem to find them.
Am I missing something? Can somebody give me an example of this working?
Any and all tips or clues would be appreciated.

Welcome to Apple Discussions and Mac Computing
Definitely an E-bay issue. The coding on the page is not Safari-friendly. Firefox, as you discovered, in this instance is the better choice.

Similar Messages

My iPhone 5 is overheaded while charging and the screen is black and is not working. What should i do?

My iPhone 5 is overheaded while charging and the screen is black and is not working. What should i do?

Sounds like a battery failure. Your phone is under warranty. Bring it back to Apple

Creative cloud installed on the desktop, but when I start the window is white and does not work

can someone help me?

Thank god be with
2014-08-25 15:14 GMT-03:00 Sheena Kaul <[email protected]>:
Creative cloud installed on the desktop, but when I start the window
is white and does not work created by Sheena Kaul
<https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View
the full discussion <https://forums.adobe.com/message/6672088#6672088>

My ipod screen does not light, I can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made it the restoration of production and did not work.

My ipod screen does not light, you can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made him the restoration of production and did not work.
Please I need to know what do I have to do.
Regards

If you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
iPhone and iPod touch: Unable to update or restore
Note that this requires using the sleep/wake button. If you are not successful then there is nothing else that I know you can do.

2 of 4 speakers and Subwoofer not working for Altec Lansing Lucasfilms THX Surround (circa 2003)

I am attempting to connect my Altec Lansing Lucasfilm THX 5.1 sound system to my HP ENVY All-in-one. I think the original audio card for the sound system came on a Dell with Soundblaster.
I have connected the green audio to the jack in the back which only gets 2 of the 4 speakers working (even after configuring the speakers). The subwoofer is connected to the sub jack in the back panel as well and is not working at all. I realize that I am trying to have an ancient sound system work with my fancy new HP Envy. Am I asking too much?? I thought maybe a driver update might be needed. But in theory, if those jacks are available in the back it should work (she says optimistically).
Any suggestions or advice would be appreciated.

Not a problem. Thank you for the additional information.
It sounds like you have the speakers connected correctly. If there is only one connector for all of the speakers, it may be that you will only be able to use two of them. However, I am not certain why the subwoofer isn't working. Is it selected in the Control Panel / Sound? I realize that you said the speakers are configured in the Control Panel, but is the subwoofer separate?
I have an old (2001) Polk Audio set of speakers. I have only been able to get two of them and the subwoofer to work with my new HP computer. It sounds fine without the other two speakers.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I did a hard reset on the airport express, but it did not work

I successfully reset the airport express once, got it set up, plugged in the new speakers, they worked for about 1 minute, then the blinking yellow error code started on the airport express. Since then I have tried to do a hard reset numerous times and stil get the blinking yellow light. Please help!

hello, it is a known issue that light-weight themes are currently not shown when firefox is set to never remember history (a.k.a. always run in private browsing mode) in firefox/tools > options > privacy. this will be corrected in the upcoming firefox release.

The pirate bay page and links not working on firefox

First of all, the website in question(thepiratebay.se) works normal on IE with no issue.
On Firefox however, attempts to click on 'ANYTHING' on this sites' webpage results in no effect. This includes the text/search box where the text indicator does not show up or any of the link on the page will not work. When mousing over the hyperlinks or objects on the page, the cursor does not change to a 'finger' and a small box area around the pointer jitters/pull the texts or graphics within it like a 0x magnifying glass that ran over the texts. Right-clicking anywhere on the page(text, blank or graphics) yield a flash applet menu with the first line(greyed out) indicating 'movie not loaded' and the second line 'About adobe flash player v11.4.402.256...'. These symptoms extends to all sub-pages of the site after skipping to them using Google search. This issue ONLY affects 'thepiratebay.se' thus far to my knowledge.
I'm using Firefox v15.0 and recently updated the Flash plugin to the latest version before Firefox request and updated to 15.0.
I tried uninstalling and reinstalling Shockwave Flash browser plugin as well as clearing all cache/history/form/etc.. to no avail...

I have exactly the same thing happening here, only in Firefox. Like you say it does work fine in other browsers but if you start a private browsing window in FF it works fine..very strange!

Firefox 4: have 4 users and its not working for one. The actual Firefox search bit doesn't load properly: very bare and search doesn't work . However, bookmarks etc seem OK

Have just upgraded to Firefox 4 today, and seems OK for 3 out of 4 users, but not for one of us. It's just that bit in the middle with the red fox logo and the search box that don't load properly - looks very bare - and can type into box but nothing happens when press 'search'

Don't know - the bit in the middle of the web page which sounds like the search container!
However, have found a work around - opening up Google and saving that as the home page.
Thanks for your reply.

The new Photos software and iWeb not working

Just downloaded the new Photos software. Now photos do not appear on the iWeb photos tab to drag into web page. Is there a way to remedy that?

It's not gone - just a version too old to run on 10.10.3. However, read the following:
Terence Devlin including Apple logo changes for feature 126 Apple image including Apple logo changes for feature 126 Apple image ends here
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
[DocumentBodyStart:d25bf602-029a-4466-b895-2ab6c98bb4c9]
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
The above should allow you to get iPhoto 9.6.1 which will run under 10.10.3.

HT2693 Downloaded the piano keyboard app and will not work at all...also no sound. This app only. Refund??

I downloaded the piano keyboard app....will not work at all....the screen comes up but no a tigon when trying to use...also no sound.

Try a couple of basic troubleshooting steps,
Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Delete the app and reinstall. You will not have to pay for it again as long as you use the same Apple ID that you bought it with. Hold down on the icon until it jiggles, then tap the X on the icon to delete the app. Tap the home button to stop the apps from jiggling. Go back to the App Store purchased tab and download the app again.

My 16 months old MacBook Pro just got out of battery and turned off in the normal way in this cases. After conecting it to the electricity, I turned it on again and then after restoring the sistem went off and its not working anymore!!!

I tried pressing at the same time ctrl shift comand keys to reset it and then when I try to turn it on again it just starts the screen blinks and the hard drive sounds briefly but then it dead, if you close the mac then the light that glows when is sleepeng turns on and the computer gets hot and the fans turns on and it´s stopped when the battery is dead again.
Please help its incredible, it´s my 3 mac and I never experienced this before.

Thanks Sig. The information is here: Anything useful stand out?
Battery Information:
Model Information:
Serial Number:    9G1130CJVD3MA
Manufacturer:    DP
Device Name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    0002
Cell Revision:    0158
Charge Information:
Charge Remaining (mAh):    5663
Fully Charged:    Yes
Charging:    No
Full Charge Capacity (mAh):    5663
Health Information:
Cycle Count:    59
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    261
Voltage (mV):    12574
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Wake on LAN:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    Yes
ID:    0x0100
Wattage (W):    60
Revision:    0x0000
Family:    0x00ba
Serial Number:    0x00262704
Charging:    No

UltraNav and TrackPoint not working for my user account - but ok for others...

Got a strange one on my X201T. For some reason I can't fathom, my laptop's Trackpoint, Touchpad and all their associated buttons do not work when I log into my laptop - they did before but in the last few days, they've stopped. My external USB still works fine when connected.
However, if, for example, I do 'ctrl-alt-del' and lock the laptop, they start working again until the moment I'm logged back in. Also, If I log in on a Guest account, they all work fine! This suggests it's not the hardware, I think.
I've looked at the Control Panel / Mouse dialogue and the options under the UltraNav tab are all greyed out - but they are not on the Guest account. Somehow, my user account on the laptop is not allowing me to use the Trackpoint, etc.
My external USB mouse works fine in all accounts, btw.
I'm running Windows 7 64-bit. I've updated drivers through Lenovo update (though none seemed related to this problem).
Any thoughts how I can fix this?

kokoko, I had this problem last week. I solved it by removing "thinkpad ultranav driver" and "thinkpad ultranav utility," rebooting and reinstalling them. It hasn't happened again.

MODIFY and SAVE_TRANSACTION not working for ZONE BO

Hi
I am trying to add/delete location in transportation zone through MODIFY and SAVE_TRANSACTION but the update is not happening in database. I have done deletions and additions in other business objects but for transportation zone it is not working properly. Is something wrong with BO configuration ?
Procedure that I am following for deletion of zone:
1. Read Zone with querybyelements method
2. Read locations for this zone using retrieve_by_association method in edit mode
3. Fill modification table with deletion indicator and appropriate values for location
4. Call method Modify and then save_transaction.
I followed similar procedure for adding/deleting region in transportation zone but this also doesn't work.
Thanks
Anuraag

Hi Anuraag,
In TM you should open the transaction /SCMTMS/ZONE. Here you select the zone you would like to modify and you execute the changes you would like to make.
Regards,
Nico.

Iphoto 9.6 is not sharing with Facebook,iMessage,iCloud and is not working for print orders

iphoto 9.6 on yosemite is deleting all of the pics from the former library, iphoto 9.6 can't share with Facebook despite that it is oke with the account. no sharing with iMessage and no sharing with iCloud possible the choices stay grey. also print orders are not possible it's stay also grey.

gombaig wrote:
I had the same issue too, email, facebook, Twitter ect, all greyed out.
What ist the solution?
Did you read the thread?
here is one
I had the same issue, email, iMessage, Facebook,etc.. plus print all greyed out. I went up to the File menu, clicked on the Switch to Library drop down. Since I only have one library it was already selected, hit choose and all of the functions work again. Seems the system wasn't acknowledging my original library once I updated to Yosemite or 9.6. Either way, it works now.
If that does not work here is another suggestion
Try repair permissions with Disk Utility.
LN

Can't use audiobooks AND Genius? And VoiceOver not working for radio?

Anyone know how to resolve this? In order to transfer audiobooks, I have to disable the automatic syncing from my nano. But it seems that this means that I lose the ability to transfer the Genius mixes that are created in iTunes.
Also, after much hassle, finally got VoiceOver to work, but it only works when I"m playing music that I already have stored and it won't work for songs on the radio... any ideas?

I'm not sure about the Genius working with audio books, but from what I understand, when you say that you want VoiceOver, iTunes goes through your music list and makes that voiceover prompt for each song thats in their. It can't do that with the radio because the songs aren't preinstalled on the ipod.

The Regular Expression anchors, "^" and "$" do not work for me in Dreamweaver

Similar Messages

Maybe you are looking for