The report server service is not running on reporting service point server ID: 7403 SMS_SRS_REPORTING_POINT

Hi,
I'm having a problem when I try to install Report Services point, I can browser my report server from my SCCM site but when I install the Reporting point the reports do not load to report server.
If I check at my reportserver machine all reports are in the disk.
I have one machine with SQL Server 2012 Std SP1 and another computer with SCCM 2012 SP1.
Error at srsrp.log
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 3308 (0xCEC).    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:40    3356 (0x0D1C)
This is a SRS Reporting Point Role as SRSRP registry key exists.    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:40    3308 (0x0CEC)
Waiting for changes for 0 minutes    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:40    3308 (0x0CEC)
Timed Out...    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:40    3308 (0x0CEC)
Reporting Services URL from Registry [http://srv-bd/ReportServer/ReportService2005.asmx]    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:44    3308 (0x0CEC)
The request failed with an empty response.    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:44    3308 (0x0CEC)
(!) SRS not detected as running    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:44    3308 (0x0CEC)
STATMSG: ID=7403 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=SRV-BD.F1MAIS.LOCAL SITE=F1M PID=2052 TID=3308 GMTDATE=Mon Jan 14 17:15:44.571 2013 ISTR0="SRV-BD.F1MAIS.LOCAL" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:44    3308 (0x0CEC)
Failures reported during periodic health check by the SRS Server SRV-BD.F1MAIS.LOCAL.    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:44    3308 (0x0CEC)
Waiting for changes for 1 minutes    SMS_SRS_REPORTING_POINT    14/01/2013 14:15:44    3308 (0x0CEC)
Timed Out...    SMS_SRS_REPORTING_POINT    14/01/2013 14:16:44    3308 (0x0CEC)
Reporting Services URL from Registry [http://srv-bd/ReportServer/ReportService2005.asmx]    SMS_SRS_REPORTING_POINT    14/01/2013 14:16:44    3308 (0x0CEC)
The request failed with an empty response.    SMS_SRS_REPORTING_POINT    14/01/2013 14:16:44    3308 (0x0CEC)
(!) SRS not detected as running    SMS_SRS_REPORTING_POINT    14/01/2013 14:16:44    3308 (0x0CEC)
Failures reported during periodic health check by the SRS Server SRV-BD.F1MAIS.LOCAL.    SMS_SRS_REPORTING_POINT    14/01/2013 14:16:44    3308 (0x0CEC)
Waiting for changes for 1 minutes    SMS_SRS_REPORTING_POINT    14/01/2013 14:16:44    3308 (0x0CEC)
Timed Out...    SMS_SRS_REPORTING_POINT    14/01/2013 14:17:44    3308 (0x0CEC)
Thanks!
Rodrigo Daphanis

It looks like the MS support team just published a support tip to this problem -
http://blogs.technet.com/b/configurationmgr/archive/2013/03/06/support-tip-no-reports-show-up-in-the-console-after-installing-a-system-center-2012-configuration-manager-reporting-server.aspx
Nick Moseley | http://t3chn1ck.wordpress.com

Similar Messages

  • The report server service is not running on Reporting Service Point server

    Hi,
    I have encountered a problem, my reporting service point has stopped working. (SCCM 2012 R2)
    In srsrp.log:
    Check state SMS_SRS_REPORTING_POINT
    12/15/2014 5:48:54 AM 3152 (0x0C50)
    Check server health. SMS_SRS_REPORTING_POINT
    12/15/2014 5:48:54 AM 3152 (0x0C50)
    Successfully created srsserver SMS_SRS_REPORTING_POINT
    12/15/2014 5:48:54 AM 3152 (0x0C50)
    Reporting Services URL from Registry [https://s-hub-sql1.domain.local/ReportServer/ReportService2005.asmx]
    SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
    3152 (0x0C50)
    The request failed with HTTP status 404: Not Found.
    SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
    3152 (0x0C50)
    (!) SRS not detected as running SMS_SRS_REPORTING_POINT
    12/15/2014 5:48:54 AM 3152 (0x0C50)
    Failures reported during periodic health check by the SRS Server S-HUB-SQL1.domain.local.
    SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
    3152 (0x0C50)
    Registry change SMS_SRS_REPORTING_POINT
    12/15/2014 5:48:54 AM 3152 (0x0C50)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
    12/15/2014 5:48:54 AM 3152 (0x0C50)
    Timed Out... SMS_SRS_REPORTING_POINT
    12/15/2014 5:49:54 AM 3152 (0x0C50)
    Set configuration SMS_SRS_REPORTING_POINT
    12/15/2014 5:49:54 AM 3152 (0x0C50)
    In windows event log:
    On 12/15/2014 6:39:28 PM, component SMS_SRS_REPORTING_POINT on computer S-HUB-SQL1 reported:  The report server service is not running on Reporting Service Point server "S-HUB-SQL1"; start the service to enable reporting.
    In configuration manager service manager, the service sms_srs_reporting_point is running.
    In Reporting services configuration manager, the service is running.
    If I restart the reporting service, it doesn't helps.
    What is not properly?

    I've already found the reason why all stopped working - someone deleted the report manager URL HTTPS bindings (in Report services configuration manager). Added it back, than reporting started to work. Awww!

  • Window update will not run... error "windows cannot currently check for updates because the service in not running?"

    i am running windows 7 64bit professional on an asus essentio series cm5675 i5 processor with 16gigs of ram
    any reason or what is causes the update program/service to not run?

    Hi, here is the report generated by the Farbar Service Scanner:
    Farbar Service Scanner Version: 31-05-2013 01
    Ran by Owner (administrator) on 02-06-2013 at 13:50:39
    Running from "C:\Users\Owner\Desktop"
    Windows 7 Home Premium Service Pack 1 (X64)
    Boot Mode: Normal
    Internet Services:
    ============
    Connection Status:
    ==============
    Localhost is accessible.
    LAN connected.
    Google IP is accessible.
    Google.com is accessible.
    Yahoo IP is accessible.
    Yahoo.com is accessible.
    Windows Firewall:
    =============
    Firewall Disabled Policy:
    ==================
    System Restore:
    ============
    System Restore Disabled Policy:
    ========================
    Action Center:
    ============
    Action Center Notification Icon =====> Unable to open HKLM\...\ShellServiceObjects\{F56F6FDD-AA9D-4618-A949-C1B91AF43B1A} key. The key does not exist.
    Windows Update:
    ============
    BITS Service is not running. Checking service configuration:
    Checking Start type: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
    Checking ImagePath: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
    Checking ServiceDll: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
    Windows Autoupdate Disabled Policy:
    ============================
    Windows Defender:
    ==============
    WinDefend Service is not running. Checking service configuration:
    Checking Start type: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
    Checking ImagePath: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
    Checking ServiceDll: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
    Windows Defender Disabled Policy:
    ==========================
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender]
    "DisableAntiSpyware"=DWORD:1
    Other Services:
    ==============
    Checking Start type of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
    Checking ImagePath of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
    Checking ServiceDll of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
    File Check:
    ========
    C:\Windows\System32\nsisvc.dll => MD5 is legit
    C:\Windows\System32\drivers\nsiproxy.sys => MD5 is legit
    C:\Windows\System32\dhcpcore.dll => MD5 is legit
    C:\Windows\System32\drivers\afd.sys => MD5 is legit
    C:\Windows\System32\drivers\tdx.sys => MD5 is legit
    C:\Windows\System32\Drivers\tcpip.sys => MD5 is legit
    C:\Windows\System32\dnsrslvr.dll => MD5 is legit
    C:\Windows\System32\mpssvc.dll => MD5 is legit
    C:\Windows\System32\bfe.dll => MD5 is legit
    C:\Windows\System32\drivers\mpsdrv.sys => MD5 is legit
    C:\Windows\System32\SDRSVC.dll => MD5 is legit
    C:\Windows\System32\vssvc.exe => MD5 is legit
    C:\Windows\System32\wscsvc.dll => MD5 is legit
    C:\Windows\System32\wbem\WMIsvc.dll => MD5 is legit
    C:\Windows\System32\wuaueng.dll => MD5 is legit
    C:\Windows\System32\qmgr.dll => MD5 is legit
    C:\Windows\System32\es.dll => MD5 is legit
    C:\Windows\System32\cryptsvc.dll => MD5 is legit
    C:\Program Files\Windows Defender\MpSvc.dll => MD5 is legit
    C:\Windows\System32\ipnathlp.dll => MD5 is legit
    C:\Windows\System32\iphlpsvc.dll => MD5 is legit
    C:\Windows\System32\svchost.exe => MD5 is legit
    C:\Windows\System32\rpcss.dll => MD5 is legit
    **** End of log ****

  • Apache Web Server Listener is not running

    Hi,
    when starting E_BUSINESS issuing this
    adstrtal.sh apps/apps
    , I have this error message :
    Apache Web Server Listener is not running.
    Starting Apache Web Server Listener (dedicated HTTP) ...
    Apache Web Server Listener (PLSQL) is not running.
    Starting Apache Web Server Listener (dedicated PLSQL) ...
    What might be the problem ? How can I launch Apache Web Server Listener to see why it can not start and where to see it's log file ?
    Many thanks

    hsawwan,
    I stopped all services, and killed process that were using port 8103. Then restarted all. In jserv.log we have
    [09/11/2007 15:36:27:798 CET] Host os02ebsx.ourdomain.net not found and not allowed to connect
    [09/11/2007 15:37:29:146 CET] Repository /Data/oracle/d03/prdacomn/java/apps.zip doesn't exist!
    [09/11/2007 15:37:29:178 CET] oracle.apps.icx.common.InitSystemProperties: init
    [09/11/2007 15:37:29:233 CET] oracle.apps.fnd.tcf.SocketServer: init
    [09/11/2007 15:37:29:247 CET] weboamLocal/oracle.apps.fnd.oam.servlet.ui.OAMServlet: init
    [09/11/2007 15:37:30:005 CET] weboamLocal/oracle.apps.fnd.oam.servlet.ui.OAMServlet: Sucessfully initialize oaosu.OAMServlet
    [09/11/2007 15:37:30:156 CET] oracle.apps.mwa.wap.engine.WapServlet: init
    [09/11/2007 15:37:30:156 CET] oracle.apps.mwa = /Data/oracle/d03/prdaappl/mwa/11.5.0
    [09/11/2007 15:37:33:271 CET] Fatal error in parsing device registration file. See system log file for de-tails.
    but in Context.xml file we do not have os02ebsx.ourdomain.net. Where does java server pick up this host ?
    Thanks and regards.

  • Report Subscription by email error - The SQL Agent service is not running

    Hello All,
    This may be an easy answer, so please excuse my ignorance if I am overlooking something simple. I a simply trying to setup Report Subscriptions to be emailed to me. We currently have essentially 3 servers in use in our environment - a CAS, a Site server
    and a SQL 2012.
    I have configured the email settings in Reporting Services Configuration Manager on the Site server and was finally able to see the email option in the Create Subscription Wizard, but it errors out with:
    System.Web.Services.Protocols.SoapException: The SQL Agent service is not running. This operation requires the SQL Agent service. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SchedulerNotRespondingException: The SQL Agent service is not running.
    This operation requires the SQL Agent service.   at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateSubscription(String Report, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String
    Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters, Guid batchId, String& SubscriptionID)   at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateSubscription(String Report, ExtensionSettings
    ExtensionSettings, String Description, String EventType, String MatchData, ParameterValue[] Parameters, String& SubscriptionID)
    We do not have SQL installed locally, therefore it makes sense that the Agent service is not running. How do I subscribe to alerts in SCCM without a local installation of SQL?
    -Brad

    I am positive - see screenshots below of services on the SQL server:
    Yes, reports work perfectly otherwise... Just cannot subscribe.
    -Brad

  • Alert: [LYNC] 'Lync Server Web Conferencing' NT Service is not running.

    We keep getting this below Alert and everytime this happens, Conferencing would disconnect and connect back again.  Current setup as below. We are on latest CU November 2014.
    Server 2013 Pools - 2 pools
    Each Pool has 5 front end servers with 2 back end servers mirrored.
    Unable to find anything from best analyser,  Ports have been validated.  Any idea how to resolve this ?
    Alert: [LYNC] 'Lync Server Web Conferencing' NT Service is not running.
    Source: LS Data Conferencing Component [FE Server]
    Path: FE Server
    Last modified by: System
    Last modified time: 11/24/2014 9:41:23 AM Alert description: 'Lync Server Web Conferencing (RTCDATAMCU)' NT Service is not running. To restart the service, run 'net start RTCDATAMCU' from a command-line window.
    Whenever above alert is triggered, there is a corresponding application alert as below. 
    .Net runtime
    Application: DataMCUSvc.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an internal error in the .NET Runtime at IP 00007FFAC2A91020 (00007FFAC2A90000) with exit code 80131506.
    Application Error
    Faulting application name: DataMCUSvc.exe, version: 5.0.8308.0, time stamp: 0x5050e3de
    Faulting module name: clr.dll, version: 4.0.30319.34014, time stamp: 0x52e0b86c
    Exception code: 0xc0000005
    Fault offset: 0x0000000000001020
    Faulting process id: 0x303c
    Faulting application start time: 0x01d00621fefd0760
    Faulting application path: C:\Program Files\Microsoft Lync Server 2013\Web Conferencing\DataMCUSvc.exe
    Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
    Report Id: ca360fe4-73e7-11e4-80ca-001b21bfd144
    Faulting package full name: 
    Faulting package-relative application ID: 

    Hi,
    Did the issue also happen before updating to the latest CU?
    Please make sure you have installed the latest service pack for the Microsoft .NET Framework
    Please try to change part of Lync service to start as “Automatic (Delayed Start)”, restart FE Servers and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How do I find the report server name, and then run paper report from forms?

    How do I find the report server name, and then run paper report from forms?
    I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
    Also, I just want to run the paper report (not the web version).
    Thanks.

    Hi,
    please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
    In summary, you have to create an external Reports Service that you can then give a name.
    Frank

  • "SQL Server 2008 Reporting Services does not support map report items"

    Hi,
    I am trying some new feature that are introduced in SQL Server 2008 R2 version. While I try to use "Map" control within it, it threw the following error:-
    "Error 1 The map, Map1, was removed from the report. SQL Server 2008 Reporting Services does not support map report items. "
    -Also, similar kind of error I am getting for "Indicator" control.

    Hi Tej,
    I think you get this error message when you are deploying a report to report server using BIDS, correct?  If not, please provide more details on your scenario :-)
    If I guessed correctly, then this message is a result of trying to deploy a map report (a SSRS 2008 R2 feature) to a non-R2 2008 report server.  When deploying a report of RDL2010 format to a non-R2 report server, BIDS will downgrade the file to RDL2008 format, so that the non-R2 report server can process it.  Any report elements using features not supported in RDL2008 will be dropped during this downgrade process.
    BIDS gets the server version from a report project property called TargetServerVersion:
    http://technet.microsoft.com/en-us/library/ee635898(SQL.105).aspx
    If your report server is indeed the 2008 R2 version, then the TargetServerVersion property should be set to "SQL Server 2008 R2 Reporting Services."  The project property page also has a "Auto Detect..." option if you are uncertain about the version of your report server.
    Hope this helps!
    Cheers,
    LawrenceThis posting is provided "AS IS" with no warranties, and confers no rights.

  • OS XP Operation could not be completed. "The print spooler service is not running what to do?

    I've used this printer since 2009 no problems.  Added MS Office Home/Student 2010 and added Publisher 2010.  When I try to add printer I get this message:  "Operation could not be completed.  The print spooler service is not running.  In trouble shooting with "?" get an error Server error 403.
    I've uninstalled and installed the last 2 days, over 16 hours.  I'm on an Acer Netbook (10" screen).  What do I do to fix this.  I even tried System Restore and still does not work.

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • The index management service is not running

    Im in the process of creating a web repository  with the following version history
    Version History
    6.0.2.4.3_ContentManagement_Collaboration
    6.0.2.3.5.Enterprise_Portal_Service_Pack_2
    If finished creating the crawler profile, cache, website, sytem,repository.
    when i  go to index admin i get the error 'The index management service is not running '
    tried restarting the servlet engine, the trex server -the error still persists.
    is there any tool/note for correcting this.
    any help apreciated
    prasad badal

    Hello Karsten,
    thank You for your reply.
    We have a lot of entries in our knowledgement.log files as the following:
    #1.5#C000AC17158E0004000004AB005FCB470003E52BC02E9648#1096401000765#com.sapportals.wcm.service.indexmanagement.TaskQueueReaderTask#irj#com.sapportals.wcm.service.indexmanagement.TaskQueueReaderTask#System#0#####com.sapportals.wcm.scheduler##0#0#Error##Plain###null - java.lang.NullPointerException
         at com.sapportals.wcm.service.indexmanagement.TaskQueueReaderTask.run(TaskQueueReaderTask.java:33)
         at com.sapportals.wcm.service.scheduler.wcm.SchedulerEntry.run(SchedulerEntry.java:332)
         at com.sapportals.wcm.service.scheduler.wcm.Scheduler.run(Scheduler.java:367)
         at com.sapportals.wcm.util.factories.ThreadUtils$InternalFixedTimer.run(ThreadUtils.java:91)
         at java.lang.Thread.run(Thread.java:479)
    Do you know what to do?
    Thanks a lot

  • The audio service is not running

    Yeah as the title says..my audio isn't working it tells me "The audio service is not running"..in my headphones no sound even on my speakers..What will I do? I went to the service button and when I did start to windows audio it told me "Windows
    could not start the windows audio service on local computer Error 1068:The dependency service or group failed to start.

    Hi,
    Find the related services and start them:
    1. Click Start, type Services.msc in the Start Search box.
    2. Scroll down the list of services, right-click Windows Audio
    and select Start.
    3. Select Properties for Windows Audio and set its Startup Type
    to Automatic.
    If the Windows Audio service does not start and you still get the error
    Error 1068: The dependency service or group failed to start, then make sure that the following services are started and their
    Startup Type is set to Automatic.
    •Plug and Play
    •Multimedia Class Scheduler
    •Windows Audio Endpoint Builder
    Karen Hu
    TechNet Community Support

  • Problem found: The Diagnostics Policy Service is not running

    Whenever I attempt to run network diagnostics Windows 7 Ultimate response with Problem
    found: The Diagnostics Policy Service is not running. <o:p></o:p>
    I usually find my own solution to the network problem. However, not to the inability to run
    diagnostics. In addition, in my attempt to find a solution, the Diagnostic
    Policy Service Properties has become corrupted. The run under this account information
    is not valid.
    So I basically need the account and password for the service. In addition, once I have that info properly
    inserted, I need a way to get the diagnostics to actually run.

    Hello,
    The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
    Since your post is off-topic, I am moving it to the
    off topic forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

    We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
    I would appreciate any help...
    Thank you

    This worked for me.  GP
    Problem : error 1075 and Local print spooler service is not running.
    problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
    I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista.  HP came up with simple solution below.  The regedit part is what fixed mine.  I did not need the safe mode part.  I think Lexmark should add the solution to your knowledge base.
    ==============================
    From HP:  Please perform the below given steps in safe mode to resolve the issue.
    Reboot your notebook and press F8. The system will show some booting options select safe mode.
    Note: Starting computer in safe mode may take some time.
    Uninstall the printer using Programs and Features from the control panel of your notebook.
    Uninstalling any software from Control Panel :
    1. Click on Vista (start) button
    2. Click on control panel
    3. Double click on Programs and Features
    4. Click on YOUR Lexmark Printer  and click on remove.
    Download and reinstall the printer software using the below given link :
    http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
         NOTE:  Clicking the link may give an error indicating it is invalid.
                Copy and paste the entire link in a new browser window.
    After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
    Click on Vista (Start) button, and type Regedit.exe in search bar
    Navigate to the following branch
    HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
    In the right-pane, double-click the DependOnService value
    Delete the existing data, and then type RPCSS
    Close Regedit.exe
    Restart the computer.
    This should resolve the issue.
    For information on keeping your HP and Compaq products up and running, please visit our Web site at:
    http://www.hp.com/go/totalcare

  • (solved)-Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer

    (solved)-Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer
    Hetti Arachchige V Aravinda | Network Administrator (B.Sc, MCP, MCTS, MCSA, MCSE, MCITP, CCNA, CEH, MBCS)| http://www.windowstechinfo.com |

    Hi,
    Glad to see your problem resolved, Hope your experience is helpful with others.
    Roger Lu
    TechNet Community Support

  • SW Update:  Start Time: Not available - Service is not running

    Server Admin reports the "Software Update Service is: Running" in the Overview window. The clients are being updated from the Software Update server. The Server Admin tool also reports "Start Time: Not available - Service is not running". The Server Admin tool also reports "Last Check: Not available" from the "Settings/Updates" window. However, all new updates are available. Diskutil has verified permissions too. What needs to be done to correct the reporting?

    Hi Jeff, if you try typing 'sudo serveradmin fullstatus swupdate' in the terminal what do you get?
    If it still says stoppped then try typing 'swupdctl start'
    I sometimes need to start it from the command line.
    Let us know how you get on.
    Cheers

Maybe you are looking for