The screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

the screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

Have you tried a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

Similar Messages

  • HT1689 I cant log into my ipad or iphone to update. I can get into any account on my laptop, ME, Apple, Itunes etc. but not on the 2 mentioned.

    This is new I have been using my Ipad and Iphone for months all of a sudden I can't log in. It not matching my password.

    Have you tried logging out of your account on the iPad by tapping on your id in Settings > Store and then logging back in to see if it then works ?

  • I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?

    I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?

    Thanks Eric, but that was already turned on. I just now tried turning it off and on again, no change. Actually, I"m more interested in seeing the names than the pictures. I now only see the phone numbers and generic avatars where pics would be.

  • Playing playlists on apple TV:  It worked at one time, but not now.  Home sharing is on, on the computer, but AppleTV wants me to turn it on!

    Trying to play playlist on Apple TV.  It worked at one time, but not now.  Home sharing is on, on the computer; but apple TV keeps asking me to turn home sharing on.
      What gives?

    Hello hobartco,
    Home sharing will, indeed, need to be set up on your Apple TV, as well.
    Setting up Home Sharing for Apple TV (2nd generation and 3rd generation)
    http://support.apple.com/kb/HT4352
    Cheers,
    Allen

  • HELP!! WRT54G2 works for one computer, but not for the other

    I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

    As your one computer is working fine then there is no problem with the router so far...
    The computer which is not working...check the IP Address on that...
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
    If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
    Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
    If yahoo times out then provide static DNS on your LAN Connection...
    Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

  • My iphone is frozen and i can't power off

    please i want repair my iphone if is possible send me email at [email protected], give a steps for repair,its frozen and i can't power off

    Hold down on the sleep button and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons. Ignore the red slider if it appears.

  • My imovie is frozen and i can't find a way to make it work.

    My i Movie is frozen and i can not find a way to make it work, HELP!!!

    Hi,
    Please use the following tips/instructions to fix:
        http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My iPhone 4, bluetooth turn on in settings but not showing on home screen

    My iphone 4,bluetooth turned on in settings but not showing on home screen

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

    I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
    Narmin

    I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
    In the title you state.
    From my interanet I can access srvr but not from my home.
    Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
    In the first post you state,
    I can access windows server from within interanet but don't know how to access it from internet.
    Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
    But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
    I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
    And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
    1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
    2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
    There are lots of references to port forwarding in the TC.. eg
    http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
    The things that generally go wrong are firewall on the computer that is accepting the port.
    The ISP doesn't allow connections on a particular port. (not likely in your case)
    The router is behind another router.. double NAT will kill any port forward.
    Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
    IP on the receiving device is not static and so changes.
    Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

  • Airplay works fine in iTunes but not from the menu why?

    Hi Guys,
    I have read so many answers to the question about Airplay not working both here and the internet.
    Can someone give me the definative answer why I can Airplay from iTunes but not from the Macbook Pro itself i.e. no menu icon or setting to mirror.
    Everyone seems to say its the age of the computer or its the firewall or the wind is blowing in the wrong direction.
    Why if I can do it oneway (iTunes), I can not do it directly?
    I am using a 2011 macbook pro 10.9.3 and a apple tv 3.
    Is there a hack or work around with out purchasing more software.
    Thanks

    Hey Beauvoir17,
    Thanks for the question. Based on the information you have provided, I can conclude that your MacBook is indeed compatible with AirPlay Mirroring, as outlined in the following resource:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/HT5404
    AirPlay Mirroring in OS X takes advantage of the hardware capabilities of recent Macs to deliver high frame rates while maintaining optimal system performance. The following Mac models support AirPlay Mirroring when using OS X Mountain Lion or later:
    - iMac (Mid 2011 or newer)
    - Mac mini (Mid 2011 or newer)
    - MacBook Air (Mid 2011 or newer)
    - MacBook Pro (Early 2011 or newer)
    - Mac Pro (Late 2013 or newer)
    If you are experiencing issues with AirPlay mirroring, I would recommend the troubleshooting steps outlines at the bottom of the article.
    Thanks,
    Matt M.

  • Why are the songs in my iphone playlists grey and I can't move them.

    Why are the songs in my iPhone playlists grayed out.  I am unable to move and organize them.  I just downloaded some audio books from Audible and I cannot moved them to a playlist on my iPhone either.  What step am I missing?

    margielm2 wrote:
    So, if I haven't made any albums, I can't move pictures in the main window of the Organizer?
    Yes, you can't. The default order in the main window is based on date, ascending or descending when you are in the standard 'thumbnail view'. If you are in 'folder' view, with your folders shown in the left panel, you are shown the pictures in alphabetical order of the file names.
    I haven't created albums yet.
    I have so many pictures. I wanted to put all the pictures for each album next to each other so I can find them easily.
    It's not difficult to create albums and 'drag' pictures in it. When an album is selected, you can move your pictures around in any order in the main window panel.
    Albums are one way of grouping and ordering pictures. You should try to use keywords to organize and retrieve your pictures.

  • Unlock screen on new iPhone is enlarged and I can't scroll to unlock--new iphone user, how to unlock?, unlock screen on new iPhone is enlarged and I can't scroll to unlock--new iphone user, how to unlock?

    can't shrink the home page to unlock, but, my itunes started playing randomly, without any prompts.

    Try double tapping the screen with three fingers at once. That should unzoom it. If not hold the home and lock buttons at the same time to restart the phone.

  • It works on a PC, but not my mac...what is the world coming to??

    ok, so i upgraded to iWeb 08 and made my site. i finally figured out how to change all of the DNS information to get this thing up. once i published my site it loaded up like clock work on my PC i use for work. then when i tried to visit the site on my mac it didn't work ... any answers?? i bought my domain through godaddy.com if that makes a difference.

    Hi,
    Your site works fine. I had to put a www in before your url but other than that it appears okay. That is providing you haven't finished it yet and there should be several blank pages. The map works (I was born in Hereford in the UK ...spooky) and the front page works, but is in Latin.

  • Bookmakrs work inside InDesign CS3 but not in the PDF (Reader or Preview)

    I have a list of bookmarks set to specific pages. In InDesign they all lead to the correct pages but when viewing the PDF only two work right, the rest jumps to a different page. I checked the Bookmark description (hover over it in InDesign CS3) and they name the right page. What could I be doing wrong and why do some work? Thanks a lot!

    I have a list of bookmarks set to specific pages. In InDesign they all lead to the correct pages but when viewing the PDF only two work right, the rest jumps to a different page. I checked the Bookmark description (hover over it in InDesign CS3) and they name the right page. What could I be doing wrong and why do some work? Thanks a lot!

  • My site works in Composer preview, but not on the web.

    I have just created a site w/ composer(through mozilla) and it works when i preview the index.html in the mozilla browser. So I am now using the fetch demo to ftp transfer my files to my domain(www.swansondesignline.com) which i registered through nameroute.com. when i view my page everything works except for my images. yes, they are all .jpeg & .gif....no, there are no spaces in the file names....no, i have not changed the location of these files. any help?

    Looks fine here too. However, since this discussion forum is for iWeb, you may find better support in a forum that is specifically for composer.

Maybe you are looking for