The screen on my MacBook has been flickering and shaking up and down. It starts flickering, shaking, gets 'pixelated,' then eventually begins to fade to white and freezes. Restarting sometimes helps, but only temporarily. Why is this? How can I fix it?

The screen on my MacBook has just started flickering and shaking up and down while I am using it. The screen starts flickering, shaking, gets pixelated, begins to freeze, and eventually fades to white. Why is it doing this? How can I fix it?
It is a newer MacBook, just over 1 year. It is well cared for, hasn't been dropped, etc. I don't want to pay for expensive repairs for such a new computer, and I certainly can't afford a new one!
I've tried updating my system like the Support page suggested, but no improvement. The problem started just the other day, and is progressively getting worse.
.... as I typed this, it did it again. Only, this time it did not flicker and shake, but got 'pixelated' (pixels came up checkered-like darkened and lightened). It did this for about 2 minutes and then stopped after I did not touch the computer.... Now it is flickering... HELP!

it means that it is not a hardware issue. Other then that, Im not too sure. Sorry I can't help you any further, but Im sure others members of this forum will read your question and be able to help you. Good luck

Similar Messages

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished.

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

I fixed it!!
While not connected to any USB cable I put the iPad in recovery mode.
To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new.

I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

Skipping songs
The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
If you use Windows you may like to try scanning the files with MP3Validator which can find & fix some internal MP3 errors.
Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/control clicking and using the option Convert id3 tags> None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g.convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
tt2

I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

http://support.apple.com/kb/TS1538

When I request a software update, i am told my software is already up to date but I know it's not. how can I fix this?

when I request a software update, i am told my software is already up to date but I know it's not. how can I fix this?

The pre-2006 iMacs this forum covers cannot run any higher than OS10.5.8, and Apple pretty much stopped pushing out any updates for anything other than the current version.
If your iMac is a newer model (covered here: iMac (Intel) forum) you can run at least 10.6.8, available for purchase rather cheaply here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and it's possible you can run higher depending on your iMac variant. So find your iMac variant, please do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info" button to get this screen:
Please tell us the code name ans number for your computer in the line I've indicated with the red arrow. For an iMac, it will either be in the format, "PowerMacX,X" or "iMacX,X" depending on the age of your iMac. The trailing numbers where I put Xs will help us help you determine what exact variant you have and what upgrade options are available.
Also tell us how much RAM is installed. Newer OS versions often need more RAM that older iMacs shipped with.

My wife's nano no longer is recognized by Windows but my ipod touch is? How can I fix this?

My wife's nano no longer is recognized by Windows but my ipod touch is? How can I fix this?

     My iPod touch is always recognized by my Vista Box...using the same USB cable and port my wife's nano isn't detected anymore. Since Vista can't see the nano iTunes can't see it either. When I try my wife's nano I get the message:
     "One of the USB devices attached to this computer has malfunctioned, and Windows doesn't recognize it. For assistance in solving this problem, click this message"
     I thought her nano wasn't charged enough but I've charged it for hours and this doesn't make a difference. It used to synch like my ipod touch but it stopped working about a week ago. My wife's nano still holds songs and works it just can't be recognized by Windows. I even checked if the Apple Mobile Device app was running and it was and I stopped it and restarted it. Didn't make any difference. Any ideas?

I have 528 contacts on my phone, but only 290 on my Icloud how can i move the rest over from my phone to my Icloud nothing is working

I have 528 contacts on my phone, but only 290 on my Icloud how can i move the rest over from my phone to my Icloud nothing is working

Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (they will still be in iCloud).
Download the app My Contacts Backup to your phone. Use this app to backup the remaining contacts on your phone (from your exchange account) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email on your phone.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), set this to iCloud. (This will cause new contacts added to your phone to be added to the iCloud account.)
Go to Settings>Mail,Contacts,Calendars...tap your exchange account and turn off contacts syncing (otherwise you will end up with duplicates on your phone).
Open the My Contacts Backup email and tap the attachment to import the contacts from your exchange account back to your phone. They will be added to iCloud and appear on icloud.com and any other devices syncing contacts with your account.

I just bought the creative suite for windows but I have a mac so how can i fix it or get my money ba

I just bought the creative suite for windows but I have a mac so how can i fix it or get my money back?

Contact support and get this sorted out.
http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l
BTW the platform swap is for current version of Adobe software only, if you have older version then you may have to look for Cross-platform upgrade.

I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

Hey bill.rizzo2,
Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Phone number missing on iPad or iPod touch
If your phone number isn't listed on an iPod touch or iPad, follow these steps:
1. Update to the latest version of iOS.
2. Verify that you're using the same Apple ID that you're using on your iPhone.
3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
    - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
4. Sign in to your Apple ID with FaceTime and iMessage.
If your phone number still isn't listed, follow these steps:
1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
    - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
2. Sign in to your Apple ID on your iPhone.
3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
4. Sign in to your Apple ID on your other iOS devices.
Thanks,
Matt M.

Ok I forgot my Apple ID questions I went to try to change them but my rescue email is wrong how can I fix this

Ok I forgot my Apple ID questions I went to try to change them but my rescue email is wrong how can I fix this???

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(107400)

Well my iPod is the 2nd generation and i had to update it, but when i did i tried to put one of my pictures as the wallpaper but it didn't work. How can i fix it?

Well my iPod is the 2nd generation and i had to update it, but when i did i tried to put one of my pictures as the wallpaper but it didn't work. How can i fix it?

http://support.apple.com/kb/ht3406

Hi I am using MAC OS Yosemite10.10.3 and I have a problem to update my photoshopCC cause of error U43M1D204 eventhough I have deleted AAm Updater/1.0/ but It still not worked. How can I fix it.

Hi, I am using MAc OS 10.10.3 and I have a problem to update my photoshopCC because of error U43M1D204. I have deleted AAm Updater/1.0/ but it still not worked. How can I fix it please help.

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

When I shut my lid the backlight goes off like it is supposed to, but comes back on after a while. It never used to do this, how can I fix it?

This problem is a recent one (only has happened in the past 2-3 weeks). When I shut the lid it used to immediately sleep (the power light began to do its fade in and out, and the backlight turned off), but now when I close the lid, the power light stays on, the backlight goes off for a few seconds before coming on again (not sleeping properly?). Then the backlight will turn itself off again and the computer sleeps like it is supposed to. Is something wrong here and how can I fix it?
Thanks

I think its the same in 10.5 as in 10.6 (the example below). Do System Preferences > Keyboard. Looks like this:
UNCHECK the box that reads, "Use all F1, F2, etc, keys as standard function keys," or hold the Fn key to use F11 and F12 for volume control. It looks like you have to own an Apple aluminum keyboard to get a function key on a desktop computer.

The screen on my MacBook has been flickering and shaking up and down. It starts flickering, shaking, gets 'pixelated,' then eventually begins to fade to white and freezes. Restarting sometimes helps, but only temporarily. Why is this? How can I fix it?

Similar Messages

Maybe you are looking for