The second Earphone jack will not work. My DV6000 is only one month old.

The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
This question was solved.
View Solution.

HI,
Robert96 wrote:
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
One of the jacks is for audio in and the other is for audio out. Some select versions have an S/PD/F jack. Chances are the reason you are getting static is that if you plug an earphone into a microphone jack it will attempt to behave as a microphone. It will not operate properly.
So..a recap. There is only one earphone jack
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?

    How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
    Thanks x

    You can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
    LN

  • I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

    I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

    Static_Unit
    I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
    Don't Have Serial Number for Premiere, Only Photoshop?
    Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
    In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
    I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
    The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
    Thanks.
    ATR

  • Hello, I just did an update and now the second Language - Hebrew - does not working. why?

    Hello, I just did an update and now the second Language - Hebrew - does not working. why?

    More information please.
    If you are on adobe cloud, download indesign that support hebrew from CC desktop. Click on the preference gear on the top right then select App language.

  • HT4623 atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never

    atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never expected this from Apple.

    Hello sivas_live
    Try out the troubleshooting steps in the article to resolve issues with your touchscreen intermittent response.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    -Norm G

  • After the update my earbuds will not work for my music BUT will work fine for phone conversations

    After the update my earbud will not work for music BUT will work for phone conversations

    this might sound dumb but how do i do that because that is probably the problem

  • Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6". Where can I find it? Thanks for

    Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana

    Prompted to install Java SE 6 Runtime | Mac OS 10.9
    Mylenium

  • HT201401 my phone will not send a message to only one person. Help!

    my iphone will not send a message to only one person. How can I fix this?

    Have you tried going to your contact list - said contact - send message?

  • HT4061 My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Please help me....
    My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Hello Jesslocko,
    Before following the iPad Restore process make sure you have updated version of iTunes installed on your computer, to check that Open iTunes on your computer click on Help and then check for updates ( If there is any updates available then Install it ) and If you do not have iTunes Installed or if you want to directly update the version of your iTunes then Download and Install iTunes from here : http://www.apple.com/itunes/download/
    1. Make sure your device (iPad) is unplugged (Disconnected) from your computer (this should be the computer that you use to sync your iPad or you can use any other computer with iTunes installed in it). You can leave the USB cable connected to your iPad though.
    2. Turn off your iPad. Press and hold the power button on the top edge until a slider appears. Slide it from left to right to power off your device. If the slider doesn't appear (because your iOS device has frozen up) then hold the power and Home buttons down until the iPhone or iPad turns off.
    3. Ensure your device has a decent amount of charge. Leave it plugged in to the mains for 10 minutes or so if you see the flat battery icon. (iPad low battery)
    4. Hold down the Home button (the round button at the bottom of your iPad screen) and connect the other end of USB cable to the computer this should cause your iPhone or iPad to turn on. Keep holding the Home button until you see the iTunes and USB cable images on your iPad screen, then release the button.(iPad recovery mode)
    5. In iTunes (launch the application if it isn't running on your Computer), you should see a message saying an iPad has been found in recovery mode.
    6. Click OK and then click on Restore to bring your iPad to Factory settings

  • Sennheiser earphone jack will not fit into iPad Air with protective case on

    i have sennheiser earphones and the jack will not fit into my iPad Air with the protective leather case on. The earphone jack is too large. Does anyone know if there is some kind of adaptor I can attach to the jack so it will fit?  Or perhaps know of another solution?

    See here
    http://www.ebay.com/sch/items/?_nkw=large+to+small+headphone+adaptor&_sacat=&_ex _kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=

  • HT201401 The sounds are working on my iPhone but the ringer will not work...it only vibrates on incoming calls.  Volume is set high.

    The sounds are working on my i phone but the ringer will not work...it will only vibrate.  I have the volume set at high.

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    Have you tried ALL the troubleshooting steps?  If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange.

  • Since updating to ios 7 my camera on the back of phone will not work,

    I updated to ios 7 yesterday and now the camera on the back of my 4s will not work, it freezes, i downloaded other camera apps but still no joy, the camera on the front of phone works fine but the rear is gubbed, can anyone help or is this a case of waiting for update to fix the bugs and if it is why oh why was this update released when faults were known

    hello,
    my 4s was in os6 and when os7 first released, i have updated it. during update from os6 to os7 after 98% my wifi got disconnected and then phone automatically restarted. since then my back camera is not working. front on is working perfectly. after that i reinstall os7 properly following step by step procedure but no positive result came out.
    then i tried to change the camera with a new one but still with new camera the problem is same. then they used my camera in some other 4s and it is working fine. now i dont know what to do.
    right now using os7.1.2
    please advise.
    Salman 

  • TS1702 How can i load sibeluis scorch ,because since the software update it will not work any more, before it worked well ?

    How can i load sibelius scorch, before the software update it worked well,now it will not work, even re down loading it will not hold, please help?

    That would appear to be a Mac program, so posting here in the iTunes Store forum isn't likely to get you any useful advice. If this support article from Sibelius doesn't help:
    http://avid.force.com/pkb/articles/en_US/FAQ/en362435
    I'd suggest asking in the Sibelius forums or contacting Avid/Sibelius support.
    Regards.

  • I have a new MacBook and I'm having trouble with the help section. I would like to rearrange the order of my photos with in an Event, how do I do this? I follow the directions but it will not work. Thanks for some tips.

    I have a new MacBook Pro and I'm having trouble with some of the Help sections. I want to rearrange the order of my photo's within an Event. I have followed the directions but it will not let me do it, what am I missing?  Thanks for any tips.

    Are you talking about iPhoto? If you are please post this in the iPhoto forum, thanks!

Maybe you are looking for

  • Regarding settings in standrad report "s_alr_87012277"

    Dear Guru's, Presently we are using new version 6.0, in that i am facing a problem in the report "s_alr_87012277",This is for G/L account balances.   when they are 2 values for one g/l account with separate business area,their total should be calcula

  • UAC - Standalone local user vs domain user

    Hi, I have an application that during first launch runs a regedit /s command to import some registry keys into the user's (HKCU) registry. I have discovered if I run the application logged in as a local user (No admin privileges) with a machine that

  • Content conversion: Substructures?

    Hey experts, We're currently working with an XML structure that we have to convert in a flat file format, we're familiar with the content conversion feature but we always worked with simple structures at the same level for example: header (1.1) line

  • BDC - tabstrip in subscreen

    Hi, I need to do a BDC in which i need to handle a tabstrip inside a subscreen.in the tech. details it has the field data but no screen field for batch input. if someone worked on this req before , please let me know. by the way, that information is

  • Strange XSLT Behavior: xsl:template match

    Hello I found the following strange XSLT behavior when using xsl:template. I only want to read the content of the element /Source/Surname/Details. Therefore I match this path using xsl:template match. What is strange that in the target message also t