The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2
I tryed to link MTS files to a project that I edited with AVI files. I got the message "The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channel(s)". Does anybody know what I should do?
Relink to the correct media.
Similar Messages
-
CS5 The selected file cannot be linked because its type (audio) does not match the original file's t
Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
JeremyI had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck! -
CS6 The selected file cannot be linked because its type (audio) does not match the original file's t
I understand there is another posting in this forum with the same error happening on CS5 and their solution had something to do with Quicktime. Mine has nothing to do with this.
I ran into this exact same problem in CS6 and I found that the issue is because I renamed the root project folder. My folder structure is like this:
Drive C:\
-> [root project folder]
-> [folder containing videos]
-> MyProject.prproj
By renaming the root project folder, I was no longer able to open up the project successfully. It would get to certain clips and ask about where the clip was located. Trying to re-link it to the correct file would result in that error (which makes no sense if you think about it).
So my question is, is it intentional that the absolute folder paths are saved into the project file rather than relative paths? Does it not make more sense if paths were saved relative to the root project path? That way the root project folder could be renamed to whatever you want and it would have no effect on the project itself.I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck! -
Can anyone help with the error message I'm getting 'the selected file cannot be linked because it has 2 audio channels and the clip was created with 1 audio channel'. I had to move the footage to another folder and now am unable to link it - just getting this error message instead.... Has anyone had to deal with this before?
Thank you!Relink to the correct media.
-
Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was
I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong? All of my projects that were completed in version 5 cannot be opened up in version 9.
Thank you.Bill,
I ran G-Spot on one of the files and here it what I have:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
I guess I am really confused. The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD. I cannot understand why I cannot open it with a newer version of PrE. According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels. To me this should be ok. I put many, many hours into these videos and now it seems all for not.
Here is what I did so far:
I uploaded the required media files to a new project in PrE9 and let them index and conform. I saved the project with the same name in a different location. Do I have to do this to the project files and/or the original media files? Confusion starts here.
The next step is where I am confused. I do not know if I am proceeding in the right direction from here. There is the share tab in the upper right hand corner. Is this what you are talking about? I am truly lost from here.
Thanks. -
Selected file cannot be linked because its type (video) does not match the original file's type
I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR -
Need help urgently!! - "The selected file cannot be linked because its type (video) does not match t
Hey guys... I need your help!! I started a project using Premiere Pro 2 and was 80% when I formatted my computer (all my project files were always saved to a external hard drive). Anyways instead of installing Premiere Pro 2, I installed Premiere Pro Cs3. Problem is whenever I try starting up my project it asks me to link every file used. When I do this it says "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." I took my external harddrive to friend's house who has Premiere Pro 2 and it says the same thing. Why did this happen? Is there anyway around it... Any help would be greatly appreciated, I put over 20 hours into editing this movie... I don't want it all to go to waste.
Frequently answered question
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you -
"Media offline" and "The selected file cannot be linked"
Ok, I'm extremely frustrated right now. I opened up a project file, and all of my motion backgrounds say "Media offline." The files have not been moved or changed. They haven't even been touched. So, I tried to link them back, but then it says "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)."
There was never any audio associated with these files. These files have always been just motion backgrounds.
I can't just reimport them and start over. There are too many of them.
Is there any way I can just override the error? I obviously don't need any audio. I don't understand why there's no option to just link without the audio, especially since there never was any audio.Sorry, this is CS3. I forgot to write that.
Edit: Ok, if anybody else has this problem and finds this through Google, I found out what caused it and how to fix it.
Some other program, I think a video converter, rewrote my codecs. And it didn't do a good job. I had already removed the video converter because it wasn't any good anyway. So, I went through my "Uninstall or change a program list" (this being Windows), and removed everything that didn't look familiar, and then I reinstalled Xvid. Now it works fine. -
Publisher - pdf - "This file cannot be opened because it has no pages"
Hi,
I have a Publisher report which works fine as a single page when generated to pdf.
I change the data model to give me multiple pages and insert the entire report content into a repeating frame which correlates with the header data that is definitely present for all records. ceteris parabus.
I preview this in interactive mode - everything works okay.
I preview this in pdf and I get the error; - "This file cannot be opened because it has no pages"
This is on well formed XML with a very modest data set.
Anyone have a fix or a pointer for this please??
thanks,
Robert.Known bug.
8219848 - PDF TEMPLATE REPORT NOT PERFORMING PAGE BREAK -
When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?
asifmanzoor wrote:
i have 10.7.2, this download is 10.7.5
Are you Downloading it from here > http://support.apple.com/kb/dl1582
asifmanzoor wrote:
yes, i am using wifi
1) Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
OR...
Do not use Wi-Fi and connect Directly to your Internet via ethernet cable. -
I'm finding that songs that I have imported into Itunes and played before are suddenly showing an"Exclamation" mark and Itunes tells me that the original file cannot be found. When I tell it to locate the file, it can't do it. I went to the Itunes help for locating files, but that still won't do it. It seems that somehow they are getting deleted, but not by me that I know of.
Can anyone help me?Maybe you rename it. Somehow the path to the songs have changed if not deleted.
In Finder go to "Macintosh/Users/username/music/iTunes/iTunes Media/Music" that's where all your songs located so if those songs are not there you get an exclamation mark. You can delete those entries in iTunes and re-import again. -
Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?
Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it. -
LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be. -
Right-clicking on the link doesn't offer options to open anywhere (new tab, etc.)
There is a problem with uploading files to Google docs in Firefox 3.6x versions.
http://www.google.com/support/forum/p/Google+Docs/thread?tid=4f0369bdcf6fd7ff&hl=en "Select files to upload" not working in Firefox - Google Docs Help (Thanks to Joolsa for the link) -
apple, my prroblem now is i cannot open the ios diagnostic using my ipad. the screen shows hello,language,and countrry.and sign in.the email address
that i'm using before to sign in.and to activate my ipad (forgot password) is stiill i'm using now.i'm the owner of his gadget.i recieve ios diagnostic thru email send by apple.is there any other way to open this support.i'm using now my windows8 laptop,and i havve a new apple id.tnxsWe are fellow users here on these forums, you're not talking to iTunes Support nor Apple. I don't know where you originally posted this question, but it's only just appeared in the Using iPad forum.
If you can't remember your password then you can reset it via http://iforgot.apple.com
If you can't get it reset via that site then you will have to contact Support in your country, they should be able to reset it for you (they can also reset your security questions if you've forgotten their answers).
Contacting Apple about account security : Contact Apple for help with Apple ID account security - Apple Support
If your country isn't on that page then try this form to contact Support : https://www.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
HELPPPPPPPPPPPPPPPPPPPPPPPP!!!
-
My IMAC G5 crashed a little while ago and the only way I could get it to start back up was to reinstal tiger. Since then my cd/dvd drive has not worked. I get error 0x8002006d when I try to burn a cd. Does anyone have any suggestions. Message was edi
-
How to detect system date Format?
Could some one help to find out how to detect local system is in MM/DD/YYYY or DD/MM/YYYY format? Thanks.
-
Oracle Client Identifier, Web, JPA
I am working on a Web application that uses Struts along with EJB3. I want to user Oracle Virtual Private Database to restrict access to data based on the current user. Is there any way to set the Client_Identifier based on the Principal currently us
-
Best practices to have several BO on the same MO ?
Hi, We'd like to have several BOs on the ACCOUNT MO, each BO triggering its own set of business rules. What are the best practices for it ? Inheritance with a GenericAccount BO (DetermineBO on MO ACCOUNT) and several child MOs? What are the pitfalls